lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220920221235.1487501-2-sean.anderson@seco.com>
Date:   Tue, 20 Sep 2022 18:12:28 -0400
From:   Sean Anderson <sean.anderson@...o.com>
To:     netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>
Cc:     Vladimir Oltean <olteanv@...il.com>,
        Eric Dumazet <edumazet@...gle.com>,
        linux-kernel@...r.kernel.org, Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Alexandru Marginean <alexandru.marginean@....com>,
        "David S . Miller" <davem@...emloft.net>,
        Sean Anderson <sean.anderson@...o.com>
Subject: [PATCH net-next v6 1/8] net: phylink: Document MAC_(A)SYM_PAUSE

This documents the possible MLO_PAUSE_* settings which can result from
different combinations of MAC_(A)SYM_PAUSE. Special note is paid to
settings which can result from user configuration (MLO_PAUSE_AN). The
autonegotiation results are more-or-less a direct consequence of IEEE
802.3 Table 28B-2.

Signed-off-by: Sean Anderson <sean.anderson@...o.com>
---

Changes in v6:
- Reword documentation, (hopefully) taking into account feedback

Changes in v3:
- New

 include/linux/phylink.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 6d06896fc20d..1f997e14bf80 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -21,6 +21,35 @@ enum {
 	MLO_AN_FIXED,	/* Fixed-link mode */
 	MLO_AN_INBAND,	/* In-band protocol */
 
+	/* MAC_SYM_PAUSE and MAC_ASYM_PAUSE are used when configuring our
+	 * autonegotiation advertisement. They correspond to the PAUSE and
+	 * ASM_DIR bits defined by 802.3, respectively.
+	 *
+	 * The following table lists the values of tx_pause and rx_pause which
+	 * might be requested in mac_link_up. The exact values depend on either
+	 * the results of autonegotation (if MLO_PAUSE_AN is set) or user
+	 * configuration (if MLO_PAUSE_AN is not set).
+	 *
+	 * MAC_SYM_PAUSE MAC_ASYM_PAUSE MLO_PAUSE_AN tx_pause/rx_pause
+	 * ============= ============== ============ ==================
+	 *             0              0            0 0/0
+	 *             0              0            1 0/0
+	 *             0              1            0 0/0, 0/1, 1/0, 1/1
+	 *             0              1            1 0/0,      1/0
+	 *             1              0            0 0/0,           1/1
+	 *             1              0            1 0/0,           1/1
+	 *             1              1            0 0/0, 0/1, 1/0, 1/1
+	 *             1              1            1 0/0, 0/1,      1/1
+	 *
+	 * If you set MAC_ASYM_PAUSE, the user may request any combination of
+	 * tx_pause and rx_pause. You do not have to support these
+	 * combinations.
+	 *
+	 * However, you should support combinations of tx_pause and rx_pause
+	 * which might be the result of autonegotation. For example, don't set
+	 * MAC_SYM_PAUSE unless your device can support tx_pause and rx_pause
+	 * at the same time.
+	 */
 	MAC_SYM_PAUSE	= BIT(0),
 	MAC_ASYM_PAUSE	= BIT(1),
 	MAC_10HD	= BIT(2),
-- 
2.35.1.1320.gc452695387.dirty

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ