[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220920092227.286306-1-marcel@ziswiler.com>
Date: Tue, 20 Sep 2022 11:22:23 +0200
From: Marcel Ziswiler <marcel@...wiler.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Fabio Estevam <festevam@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 0/4] arm: dts: colibri-imx6: usb dual-role switching et. al.
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
This series is an assortment of USB dual-role specific commits as
follows:
Introduce USBC_DET GPIO based USB dual-role aka device/host switching.
Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.
Specify USBH_PEN GPIO being active-low rather than active-high
(cosmetic only).
Remove spurious debounce property from linux,extcon-usb-gpio. That
commit is actually for Colibri iMX7.
Marcel Ziswiler (3):
arm: dts: colibri-imx6: move vbus-supply to module level device tree
arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
arm: dts: imx7-colibri: remove spurious debounce property
Philippe Schenker (1):
arm: dts: colibri-imx6: usb dual-role switching
arch/arm/boot/dts/imx6dl-colibri-aster.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-iris.dts | 1 -
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++++----
arch/arm/boot/dts/imx7-colibri.dtsi | 1 -
5 files changed, 18 insertions(+), 8 deletions(-)
--
2.36.1
Powered by blists - more mailing lists