| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 20 Sep 2022 13:36:47 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Jacopo Mondi <jacopo@...ndi.org>
Cc: Marco Felsch <m.felsch@...gutronix.de>, mchehab@...nel.org,
sakari.ailus@...ux.intel.com, akinobu.mita@...il.com,
jacopo+renesas@...ndi.org, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] media: mt9m111: fix device power usage
On Tue, Sep 20, 2022 at 12:34:12PM +0200, Jacopo Mondi wrote:
> On Tue, Sep 20, 2022 at 12:27:04PM +0200, Jacopo Mondi wrote:
> > On Fri, Sep 16, 2022 at 03:57:12PM +0200, Marco Felsch wrote:
> > > Currently the driver turn off the power after probe and toggle it during
> > > .stream by using the .s_power callback. This is problematic since other
> > > callbacks like .set_fmt accessing the hardware as well which will fail.
> > > So in the end the default format is the only supported format.
> > >
> > > Remove the hardware register access from the callbacks and instead sync
> > > the state once right before the stream gets enabled to fix this for
> > > .set_fmt() and .set_selection(). For the debug register access we need
> > > to turn the device on/off before accessing the registers to fix this and
> > > finally for the ctrls access we need the device to be powered to fix
> > > this.
> > >
> > > Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
> > > ---
> > > Changelog:
> > >
> > > v2:
> > > - squash patch 2 and 3
> > > ---
> > > drivers/media/i2c/mt9m111.c | 40 ++++++++++++++++++++-----------------
> > > 1 file changed, 22 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> > > index 52be1c310455..8de93ab99cbc 100644
> > > --- a/drivers/media/i2c/mt9m111.c
> > > +++ b/drivers/media/i2c/mt9m111.c
> > > @@ -455,7 +455,7 @@ static int mt9m111_set_selection(struct v4l2_subdev *sd,
> > > struct mt9m111 *mt9m111 = to_mt9m111(client);
> > > struct v4l2_rect rect = sel->r;
> > > int width, height;
> > > - int ret, align = 0;
> > > + int align = 0;
> > >
> > > if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
> > > sel->target != V4L2_SEL_TGT_CROP)
> > > @@ -481,14 +481,11 @@ static int mt9m111_set_selection(struct v4l2_subdev *sd,
> > > width = min(mt9m111->width, rect.width);
> > > height = min(mt9m111->height, rect.height);
> > >
> > > - ret = mt9m111_setup_geometry(mt9m111, &rect, width, height, mt9m111->fmt->code);
> > > - if (!ret) {
> > > - mt9m111->rect = rect;
> > > - mt9m111->width = width;
> > > - mt9m111->height = height;
> > > - }
> > > + mt9m111->rect = rect;
> > > + mt9m111->width = width;
> > > + mt9m111->height = height;
> > >
> > > - return ret;
> > > + return 0;
> > > }
> > >
> > > static int mt9m111_get_selection(struct v4l2_subdev *sd,
> > > @@ -632,7 +629,6 @@ static int mt9m111_set_fmt(struct v4l2_subdev *sd,
> > > const struct mt9m111_datafmt *fmt;
> > > struct v4l2_rect *rect = &mt9m111->rect;
> > > bool bayer;
> > > - int ret;
> > >
> > > if (mt9m111->is_streaming)
> > > return -EBUSY;
> > > @@ -681,16 +677,11 @@ static int mt9m111_set_fmt(struct v4l2_subdev *sd,
> > > return 0;
> > > }
> > >
> > > - ret = mt9m111_setup_geometry(mt9m111, rect, mf->width, mf->height, mf->code);
> > > - if (!ret)
> > > - ret = mt9m111_set_pixfmt(mt9m111, mf->code);
> > > - if (!ret) {
> > > - mt9m111->width = mf->width;
> > > - mt9m111->height = mf->height;
> > > - mt9m111->fmt = fmt;
> > > - }
> > > + mt9m111->width = mf->width;
> > > + mt9m111->height = mf->height;
> > > + mt9m111->fmt = fmt;
> > >
> > > - return ret;
> > > + return 0;
> > > }
> > >
> > > static const struct mt9m111_mode_info *
> > > @@ -748,6 +739,8 @@ mt9m111_find_mode(struct mt9m111 *mt9m111, unsigned int req_fps,
> > > return mode;
> > > }
> > >
> > > +static int mt9m111_s_power(struct v4l2_subdev *sd, int on);
> > > +
> > > #ifdef CONFIG_VIDEO_ADV_DEBUG
> > > static int mt9m111_g_register(struct v4l2_subdev *sd,
> > > struct v4l2_dbg_register *reg)
> > > @@ -758,10 +751,14 @@ static int mt9m111_g_register(struct v4l2_subdev *sd,
> > > if (reg->reg > 0x2ff)
> > > return -EINVAL;
> > >
> > > + mt9m111_s_power(sd, 1);
> > > +
> > > val = mt9m111_reg_read(client, reg->reg);
> > > reg->size = 2;
> > > reg->val = (u64)val;
> > >
> > > + mt9m111_s_power(sd, 0);
> > > +
> > > if (reg->val > 0xffff)
> > > return -EIO;
> > >
> > > @@ -776,9 +773,13 @@ static int mt9m111_s_register(struct v4l2_subdev *sd,
> > > if (reg->reg > 0x2ff)
> > > return -EINVAL;
> > >
> > > + mt9m111_s_power(sd, 1);
> > > +
> > > if (mt9m111_reg_write(client, reg->reg, reg->val) < 0)
> > > return -EIO;
> > >
> > > + mt9m111_s_power(sd, 0);
> > > +
> >
> > So far so good
> >
> > > return 0;
> > > }
> > > #endif
> > > @@ -891,6 +892,9 @@ static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl)
> > > struct mt9m111 *mt9m111 = container_of(ctrl->handler,
> > > struct mt9m111, hdl);
> > >
> > > + if (!mt9m111->is_streaming)
> > > + return 0;
> > > +
> >
> > If you refuse to set controls if the sensor is not streaming (ie
> > powered) which I think it's right, shouldn't you call
> > __v4l2_ctrl_handler_setup() at s_stream(1) time to have the controls
> > applied ?
>
> Oh scratch that, it's in the s_power(1) call path. It's would be nicer
> to have runtime_pm, but you already know that :)
Runtime PM shouldn't be hard to implement, I'd really prefer that.
> Reviewed-by: Jacopo Mondi <jacopo@...ndi.org>
>
> > > switch (ctrl->id) {
> > > case V4L2_CID_VFLIP:
> > > return mt9m111_set_flip(mt9m111, ctrl->val,
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists