linux-kernel - [PATCH v3 9/9] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220921031327.4135-10-mranostay@ti.com>
Date:   Tue, 20 Sep 2022 20:13:27 -0700
From:   Matt Ranostay <mranostay@...com>
To:     <vigneshr@...com>, <nm@...com>, <robh+dt@...nel.org>
CC:     <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 9/9] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

From: Aswath Govindraju <a-govindraju@...com>

x1 lane PCIe slot in the common processor board is enabled and connected to
J721S2 SOM. Add PCIe DT node in common processor board to reflect the
same.

Signed-off-by: Aswath Govindraju <a-govindraju@...com>
Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
---
 .../boot/dts/ti/k3-j721s2-common-proc-board.dts    | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index cb99a97af426..793ee77838f4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -428,6 +428,20 @@ flash@0{
 	};
 };
 
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "disabled";
+};
+
 &mcu_mcan0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_mcan0_pins_default>;
-- 
2.37.2