linux-kernel - Re: [PATCH] tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 21 Sep 2022 11:45:33 +0300 (EEST)
From:   Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To:     Sherry Sun <sherry.sun@....com>
cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        bhuvanchandra.dv@...adex.com,
        linux-serial <linux-serial@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>, linux-imx@....com
Subject: Re: [PATCH] tty: serial: fsl_lpuart: disable dma rx/tx use flags in
 lpuart_dma_shutdown

On Tue, 20 Sep 2022, Sherry Sun wrote:

> lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
> still occur which in turn tries to access dma apis if lpuart_dma_tx_use
> flag is true. At this point since dma is torn down, these dma apis can
> abort. Set lpuart_dma_tx_use and the corresponding rx flag
> lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
> accessed after they are relinquished.
> 
> Otherwise, when try to kill btattach, kernel may panic. This patch may
> fix this issue.
> root@...8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
> ^C[   90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
> [   90.189806] Modules linked in: moal(O) mlan(O)
> [   90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G           O      5.15.32-06136-g34eecdf2f9e4 #37
> [   90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
> [   90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [   90.215470] pc : fsl_edma3_disable_request+0x8/0x60
> [   90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
> [   90.225237] sp : ffff800013f0bac0
> [   90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
> [   90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
> [   90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
> [   90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
> [   90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
> [   90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
> [   90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
> [   90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
> [   90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
> [   90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
> [   90.299876] Call trace:
> [   90.302321]  fsl_edma3_disable_request+0x8/0x60
> [   90.306851]  lpuart_flush_buffer+0x40/0x160
> [   90.311037]  uart_flush_buffer+0x88/0x120
> [   90.315050]  tty_driver_flush_buffer+0x20/0x30
> [   90.319496]  hci_uart_flush+0x44/0x90
> [   90.323162]  +0x34/0x12c
> [   90.327253]  tty_ldisc_close+0x38/0x70
> [   90.331005]  tty_ldisc_release+0xa8/0x190
> [   90.335018]  tty_release_struct+0x24/0x8c
> [   90.339022]  tty_release+0x3ec/0x4c0
> [   90.342593]  __fput+0x70/0x234
> [   90.345652]  ____fput+0x14/0x20
> [   90.348790]  task_work_run+0x84/0x17c
> [   90.352455]  do_exit+0x310/0x96c
> [   90.355688]  do_group_exit+0x3c/0xa0
> [   90.359259]  __arm64_sys_exit_group+0x1c/0x20
> [   90.363609]  invoke_syscall+0x48/0x114
> [   90.367362]  el0_svc_common.constprop.0+0xd4/0xfc
> [   90.372068]  do_el0_svc+0x2c/0x94
> [   90.375379]  el0_svc+0x28/0x80
> [   90.378438]  el0t_64_sync_handler+0xa8/0x130
> [   90.382711]  el0t_64_sync+0x1a0/0x1a4
> [   90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
> [   90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
> [   90.397073] note: btattach[503] exited with preempt_count 1
> [   90.402636] Fixing recursive fault but reboot is needed!
> 
> Fixes: 6250cc30c4c4 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx")
> Signed-off-by: Thara Gopinath <tgopinath@...rosoft.com>
> Signed-off-by: Sherry Sun <sherry.sun@....com>
> ---
>  drivers/tty/serial/fsl_lpuart.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
> index f21915015d67..064bd1f33c21 100644
> --- a/drivers/tty/serial/fsl_lpuart.c
> +++ b/drivers/tty/serial/fsl_lpuart.c
> @@ -1771,6 +1771,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport)
>  	if (sport->lpuart_dma_rx_use) {
>  		del_timer_sync(&sport->lpuart_timer);
>  		lpuart_dma_rx_free(&sport->port);
> +		sport->lpuart_dma_rx_use = false;
>  	}
>  
>  	if (sport->lpuart_dma_tx_use) {
> @@ -1779,6 +1780,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport)
>  			sport->dma_tx_in_progress = false;
>  			dmaengine_terminate_all(sport->dma_tx_chan);
>  		}
> +		sport->lpuart_dma_tx_use = false;
>  	}
>  
>  	if (sport->dma_tx_chan)

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>

-- 
 i.