linux-kernel - [PATCH v6 2/2] hwmon: (mr75203) add support for series 6 temperature equation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220921121844.8059-3-farbere@amazon.com>
Date:   Wed, 21 Sep 2022 12:18:44 +0000
From:   Eliav Farber <farbere@...zon.com>
To:     <jdelvare@...e.com>, <linux@...ck-us.net>,
        <linux-hwmon@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <andriy.shevchenko@...el.com>, <sudipm.mukherjee@...il.com>
CC:     <farbere@...zon.com>, <hhhawa@...zon.com>, <jonnyc@...zon.com>,
        "Andy Shevchenko" <andriy.shevchenko@...ux.intel.com>,
        kernel test robot <lkp@...el.com>
Subject: [PATCH v6 2/2] hwmon: (mr75203) add support for series 6 temperature equation

The current equation used in code is aligned to series 5:
T = G + H * (n / cal5 - 0.5) + J * F
Where:
G = 60, H = 200, cal5 = 4094, J = -0.1, F = frequency clock in MHz

Series 6 has a slightly different equation:
T = G + H * (n / cal5 - 0.5)
and a different set of coefficients:
G = 57.4, H = 249.4, cal5 = 4096

This change supports equation and coefficients for both series.
(for series 6, J is set to 0).

The series is determined according to “moortec,ts-series” property in
the device tree.
If absent, series 5 is assumed to be the default.

Signed-off-by: Eliav Farber <farbere@...zon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Reported-by: kernel test robot <lkp@...el.com>
---
V5 -> V4:
- fix undefined reference to `__divdi3'

V4 -> V3:
- Replace of_property_read_u32() with device_property_read_u32().
- Use switch-case instead of if-else.

V3 -> V2:
- New patch to support temperature sensor series 6 instead of having to
  set all 4 coefficients.

 drivers/hwmon/mr75203.c | 66 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index fb262fd2b511..f17050e11328 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -115,6 +115,15 @@
 #define PVT_SERIES5_J_CONST	-100
 #define PVT_SERIES5_CAL5_CONST	4094
 
+/* Temperature coefficients for series 6 */
+#define PVT_SERIES6_H_CONST	249400
+#define PVT_SERIES6_G_CONST	57400
+#define PVT_SERIES6_J_CONST	0
+#define PVT_SERIES6_CAL5_CONST	4096
+
+#define TEMPERATURE_SENSOR_SERIES_5	5
+#define TEMPERATURE_SENSOR_SERIES_6	6
+
 #define PRE_SCALER_X1	1
 #define PRE_SCALER_X2	2
 
@@ -147,6 +156,13 @@ struct voltage_channels {
 	u8 max;
 };
 
+struct temp_coeff {
+	u32 h;
+	u32 g;
+	u32 cal5;
+	s32 j;
+};
+
 struct pvt_device {
 	struct regmap		*c_map;
 	struct regmap		*t_map;
@@ -156,6 +172,7 @@ struct pvt_device {
 	struct reset_control	*rst;
 	struct voltage_device	*vd;
 	struct voltage_channels	vm_channels;
+	struct temp_coeff	ts_coeff;
 	u32			t_num;
 	u32			p_num;
 	u32			v_num;
@@ -186,10 +203,12 @@ static long pvt_calc_temp(struct pvt_device *pvt, u32 nbs)
 	 * Convert the register value to degrees centigrade temperature:
 	 * T = G + H * (n / cal5 - 0.5) + J * F
 	 */
-	s64 tmp = PVT_SERIES5_G_CONST +
-		div_s64(PVT_SERIES5_H_CONST * (s64)nbs, PVT_SERIES5_CAL5_CONST) -
-		PVT_SERIES5_H_CONST / 2 +
-		div_s64(PVT_SERIES5_J_CONST * (s64)pvt->ip_freq, HZ_PER_MHZ);
+	struct temp_coeff *ts_coeff = &pvt->ts_coeff;
+
+	s64 tmp = ts_coeff->g +
+		div_s64(ts_coeff->h * (s64)nbs, ts_coeff->cal5) -
+		ts_coeff->h / 2 +
+		div_s64(ts_coeff->j * (s64)pvt->ip_freq, HZ_PER_MHZ);
 
 	return clamp_val(tmp, PVT_TEMP_MIN_mC, PVT_TEMP_MAX_mC);
 }
@@ -668,6 +687,41 @@ static int pvt_get_pre_scaler(struct device *dev, struct pvt_device *pvt)
 	return ret;
 }
 
+static int pvt_set_temp_coeff(struct device *dev, struct pvt_device *pvt)
+{
+	struct temp_coeff *ts_coeff = &pvt->ts_coeff;
+	u32 series;
+	int ret;
+
+	/* Incase ts-series property is not defined, use default 5. */
+	ret = device_property_read_u32(dev, "moortec,ts-series", &series);
+	if (ret)
+		series = TEMPERATURE_SENSOR_SERIES_5;
+
+	switch (series) {
+	case TEMPERATURE_SENSOR_SERIES_5:
+		ts_coeff->h = PVT_SERIES5_H_CONST;
+		ts_coeff->g = PVT_SERIES5_G_CONST;
+		ts_coeff->j = PVT_SERIES5_J_CONST;
+		ts_coeff->cal5 = PVT_SERIES5_CAL5_CONST;
+		break;
+	case TEMPERATURE_SENSOR_SERIES_6:
+		ts_coeff->h = PVT_SERIES6_H_CONST;
+		ts_coeff->g = PVT_SERIES6_G_CONST;
+		ts_coeff->j = PVT_SERIES6_J_CONST;
+		ts_coeff->cal5 = PVT_SERIES6_CAL5_CONST;
+		break;
+	default:
+		dev_err(dev, "invalid temperature sensor series (%u)\n",
+			series);
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "temperature sensor series = %u\n", series);
+
+	return 0;
+}
+
 static int mr75203_probe(struct platform_device *pdev)
 {
 	u32 ts_num, vm_num, pd_num, ch_num, val, index, i;
@@ -738,6 +792,10 @@ static int mr75203_probe(struct platform_device *pdev)
 		if (ret)
 			return ret;
 
+		ret = pvt_set_temp_coeff(dev, pvt);
+		if (ret)
+			return ret;
+
 		temp_config = devm_kcalloc(dev, ts_num + 1,
 					   sizeof(*temp_config), GFP_KERNEL);
 		if (!temp_config)
-- 
2.37.1