| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 22 Sep 2022 16:40:29 -0500
From: Li Yang <leoyang.li@....com>
To: shawnguo@...nel.org, devicetree@...r.kernel.org
Cc: robh+dt@...nel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Li Yang <leoyang.li@....com>,
Camelia Groza <camelia.groza@....com>,
Pankaj Bansal <pankaj.bansal@....com>
Subject: [PATCH v3 8/9] arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
There is mmio based mdio mux function in the FPGA device on ls1046a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it.
Signed-off-by: Camelia Groza <camelia.groza@....com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@....com>
Signed-off-by: Li Yang <leoyang.li@....com>
---
.../boot/dts/freescale/fsl-ls1046a-qds.dts | 155 +++++++++++++++++-
1 file changed, 153 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index eec62c63dafe..f969173fb337 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -3,7 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
*
* Shaohui Xie <Shaohui.Xie@....com>
*/
@@ -17,14 +17,26 @@ / {
compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
aliases {
+ emi1-slot1 = &ls1046mdio_s1;
+ emi1-slot2 = &ls1046mdio_s2;
+ emi1-slot4 = &ls1046mdio_s4;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
+ qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+ qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+ qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+ qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+ sgmii-s1-p1 = &sgmii_phy_s1_p1;
+ sgmii-s1-p2 = &sgmii_phy_s1_p2;
+ sgmii-s1-p3 = &sgmii_phy_s1_p3;
+ sgmii-s1-p4 = &sgmii_phy_s1_p4;
+ sgmii-s4-p1 = &sgmii_phy_s4_p1;
};
chosen {
@@ -153,8 +165,9 @@ nand@1,0 {
};
fpga: board-control@2,0 {
- compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
+ compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
reg = <0x2 0x0 0x0000100>;
+ ranges = <0 2 0 0x100>;
};
};
@@ -177,3 +190,141 @@ qflash0: flash@0 {
};
#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+ ethernet@...00 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@...00 {
+ phy-handle = <&sgmii_phy_s4_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@...00 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@...00 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@...00 {
+ phy-handle = <&sgmii_phy_s1_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@...00 {
+ phy-handle = <&sgmii_phy_s1_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@...00 { /* DTSEC9/10GEC1 */
+ phy-handle = <&sgmii_phy_s1_p1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@...00 { /* DTSEC10/10GEC2 */
+ phy-handle = <&sgmii_phy_s1_p2>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1046mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1046mdio1: mdio@1 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1046mdio_s1: mdio@2 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmii_phy_s1_p2: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmii_phy_s1_p3: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmii_phy_s1_p4: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1046mdio_s2: mdio@3 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1046mdio_s4: mdio@5 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--
2.37.1
Powered by blists - more mailing lists