[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD=FV=WNXu8RbKhQnuL0ZbkSyN3jHG4CQmCzjC9T1-OWq4Jbaw@mail.gmail.com>
Date: Thu, 22 Sep 2022 17:16:29 -0700
From: Doug Anderson <dianders@...omium.org>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Johan Hovold <johan@...nel.org>,
Andrew Halaney <ahalaney@...hat.com>,
Mark Brown <broonie@...nel.org>,
Andy Gross <agross@...nel.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 0/6] arm64: dts: qcom: Fix broken regulator spec on
RPMH boards
Bjorn,
On Thu, Sep 8, 2022 at 9:04 AM Doug Anderson <dianders@...omium.org> wrote:
>
> Bjorn,
>
> On Mon, Aug 29, 2022 at 9:50 AM Douglas Anderson <dianders@...omium.org> wrote:
> >
> > Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> > get_optimum_mode(), not set_load()") several boards were able to
> > change their regulator mode even though they had nothing listed in
> > "regulator-allowed-modes". After that commit (and fixes [1]) we'll be
> > stuck at the initial mode. Discussion of this (again, see [1]) has
> > resulted in the decision that the old dts files were wrong and should
> > be fixed to fully restore old functionality.
> >
> > This series attempts to fix everyone. I've kept each board in a
> > separate patch to make stable / backports work easier.
> >
> > Affected boards were found with:
> > rpmh_users=$(git grep -l -i rpmh -- arch/arm*/boot/dts/qcom)
> > set_modes=$(grep -l regulator-allow-set-load ${rpmh_users})
> > but_no_allowed_modes=$(grep -l -v regulator-allowed-modes ${set_modes})
> >
> > Fix was applied with:
> > for f in ${but_no_allowed_modes}; do
> > sed -i~ -e \
> > 's/^\(\s*\)regulator-allow-set-load;/\1regulator-allow-set-load;\n\1regulator-allowed-modes =\n\1 <RPMH_REGULATOR_MODE_LPM\n\1 RPMH_REGULATOR_MODE_HPM>;/'\
> > $f
> > done
> >
> > Then results were manually inspected. In one board I removed a
> > "regulator-allow-set-load" from a fixed regulator since that was
> > clearly wrong.
> >
> > v2 of this series adds tags and also rebases atop Johan's series [2]
> > as requested [3]. This ends up turning the series into a 6-part series
> > instead of a 7-part one.
> >
> > It should also be noted that as of the v2 posting that the related
> > regulator fixes have all landed in the regulator tree.
> >
> > [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
> > [2] https://lore.kernel.org/r/20220803121942.30236-1-johan+linaro@kernel.org/
> > [3] https://lore.kernel.org/r/YwhwIX+Ib8epUYWS@hovoldconsulting.com/
> >
> > Changes in v2:
> > - Added note about removing regulator-allow-set-load from vreg_s4a_1p8
> > - Rebased atop ("...: sa8295p-adp: disallow regulator mode switches")
> > - Rebased atop ("...: sc8280xp-crd: disallow regulator mode switches")
> >
> > Douglas Anderson (6):
> > arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
> > arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
> > arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
> > arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are
> > allowed
> > arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are
> > allowed
> > arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
> >
> > arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
> > arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 12 ++++++++++++
> > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 6 ++++++
> > .../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 6 ++++++
> > .../arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 6 ++++++
> > arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 12 ++++++++++++
> > 6 files changed, 54 insertions(+), 1 deletion(-)
>
> I think this series is ready to land if it's a good time now. It looks
> like you've already applied the series that this depends on [1] and
> this one is all reviewed and ready to go. Thanks!
>
> [1] https://lore.kernel.org/all/166181675980.322065.3918715363441736917.b4-ty@kernel.org/
I saw you sent out a pull request, but it didn't seem to include these
patches. Were they missing anything? Maybe you're still planning on a
"Fixes" pull request?
-Doug
Powered by blists - more mailing lists