| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220923152000.GA444697@tom-ThinkPad-T14s-Gen-2i>
Date: Fri, 23 Sep 2022 17:20:00 +0200
From: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
To: heiko@...ech.de
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org
Subject: px30-evb crash on 6.0.0-rc6, u2phy_otg, otg-port issue
Hello Heiko,
I'm playing with px30_mini_evb_v11_20190507 board on linux 6.0.0-rc6.
We have some problems on "rockchip,px30-usb2phy" driver in particular in
u2phy_otg: otg-port node (px30-evb.dts). Disabling this I'm able to boot
the board:
&u2phy {
status = "okay";
u2phy_host: host-port {
status = "okay";
};
u2phy_otg: otg-port {
status = "disabled";
};
};
In particular we have some problems here:
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index bd0b35cac83e3..42647cd660bbf 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -4084,7 +4084,9 @@ static int clk_nodrv_prepare_enable(struct clk_hw *hw)
static void clk_nodrv_disable_unprepare(struct clk_hw *hw)
{
WARN_ON_ONCE(1);
}
logs:
[ 1.269466] rockchip-usb2phy: probe of ff2c0000.syscon:usb2phy@100 failed with error 1
[ 1.279044] ------------[ cut here ]------------
[ 1.284135] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:4087 clk_nodrv_disable_unprepare+0x4/0x10
[ 1.293913] Modules linked in:
[ 1.297276] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc6-00220-gb82580766e4c #147
[ 1.306172] Hardware name: Rockchip PX30 EVB (DT)
[ 1.311338] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.318993] pc : clk_nodrv_disable_unprepare+0x4/0x10
[ 1.324549] lr : clk_core_disable+0x60/0xb8
[ 1.329152] sp : ffff80000a5eba20
[ 1.332793] x29: ffff80000a5eba20 x28: 0000000000000007 x27: ffff800009b96068
[ 1.340657] x26: ffff800009ad0400 x25: ffff80000a52b000 x24: 0000000000000000
[ 1.348516] x23: ffff0000038f5300 x22: 0000000000000000 x21: 0000000000000000
[ 1.356376] x20: ffff0000038f5300 x19: ffff0000038f5300 x18: ffff000002c76610
[ 1.364240] x17: 000000005a2f9018 x16: 000000008b35b0bc x15: ffff000003097740
[ 1.372100] x14: 0000000000000000 x13: ffff000002c76610 x12: ffff0000030976c0
[ 1.379961] x11: 000000ffffffffff x10: ffff000002c76618 x9 : ffff000002c76610
[ 1.387822] x8 : ffff0000038f5300 x7 : ffff000002ce0000 x6 : 0000000000000000
[ 1.395683] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000a592748
[ 1.403545] x2 : 0000000000000001 x1 : ffff8000086d7c88 x0 : ffff00000366f8a8
[ 1.411407] Call trace:
[ 1.414091] clk_nodrv_disable_unprepare+0x4/0x10
[ 1.419269] clk_core_disable_lock+0x24/0x40
[ 1.423967] clk_core_disable_unprepare+0x18/0x38
[ 1.429145] __clk_set_parent_after+0x60/0x68
[ 1.433940] clk_core_set_parent_nolock+0x160/0x250
[ 1.439311] clk_unregister+0xe4/0x240
[ 1.443443] rockchip_usb2phy_clk480m_unregister+0x28/0x38
[ 1.449482] devm_action_release+0x14/0x20
[ 1.453996] release_nodes+0x40/0x70
[ 1.457934] devres_release_all+0x94/0xe0
[ 1.462344] device_unbind_cleanup+0x18/0x68
[ 1.467043] really_probe+0x1d0/0x2b8
[ 1.471070] __driver_probe_device+0x7c/0xe8
[ 1.475771] driver_probe_device+0x38/0x100
[ 1.480373] __driver_attach+0xa8/0x138
[ 1.484595] bus_for_each_dev+0x7c/0xd8
[ 1.488816] driver_attach+0x24/0x30
[ 1.492750] bus_add_driver+0x15c/0x210
[ 1.496968] driver_register+0x64/0x120
[ 1.501190] __platform_driver_register+0x28/0x38
[ 1.506367] rockchip_usb2phy_driver_init+0x1c/0x28
[ 1.511733] do_one_initcall+0x60/0x1f0
[ 1.515957] kernel_init_freeable+0x22c/0x2a0
[ 1.520757] kernel_init+0x24/0x130
[ 1.524604] ret_from_fork+0x10/0x20
[ 1.528539] ---[ end trace 0000000000000000 ]---
[ 1.562178] EINJ: ACPI disabled.
and after a bit:
[ 3.280015] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 3.280034] Mem abort info:
[ 3.280037] ESR = 0x0000000086000004
[ 3.280041] EC = 0x21: IABT (current EL), IL = 32 bits
[ 3.280048] SET = 0, FnV = 0
[ 3.280052] EA = 0, S1PTW = 0
[ 3.280056] FSC = 0x04: level 0 translation fault
[ 3.280061] [0000000000000000] user address but active_mm is swapper
[ 3.280069] Internal error: Oops: 86000004 [#1] PREEMPT SMP
[ 3.280077] Modules linked in:
[ 3.280092] CPU: 0 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.0.0-rc6-00220-gb82580766e4c #147
[ 3.280103] Hardware name: Rockchip PX30 EVB (DT)
[ 3.280111] Workqueue: events_unbound async_run_entry_fn
[ 3.280140] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.280150] pc : 0x0
[ 3.280160] lr : call_timer_fn.isra.30+0x24/0x80
[ 3.280171] sp : ffff80000a62b470
[ 3.280175] x29: ffff80000a62b470 x28: 0000000000000010 x27: 0000000000000004
[ 3.280190] x26: 0000000000000000 x25: 0000000000000000 x24: dead000000000122
[ 3.280204] x23: ffff800009a03000 x22: ffff80000a1d7000 x21: 0000000000000000
[ 3.280219] x20: 0000000000000101 x19: ffff000002d78000 x18: ffffffffffffffff
[ 3.280234] x17: ffff800075f19000 x16: ffff800008004000 x15: 00009726b6a67ac4
[ 3.280248] x14: 00000000000000c4 x13: 00000000000000c4 x12: ffff00007fb58d40
[ 3.280262] x11: 4200000000000000 x10: ffff00007fb52070 x9 : 0000000000000001
[ 3.280276] x8 : 0000000000000000 x7 : ffffffffffffffff x6 : 0000000000000000
[ 3.280290] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000200
[ 3.280303] x2 : 000000003fffffff x1 : 0000000000000000 x0 : ffff00000366fb10
[ 3.280318] Call trace:
[ 3.280322] 0x0
[ 3.280329] run_timer_softirq+0x3c0/0x408
[ 3.280339] __do_softirq+0x11c/0x288
[ 3.280348] irq_exit_rcu+0xe8/0x108
[ 3.280361] el1_interrupt+0x3c/0x70
[ 3.280374] el1h_64_irq_handler+0x18/0x28
[ 3.280384] el1h_64_irq+0x64/0x68
[ 3.280391] console_emit_next_record.constprop.47+0x1a8/0x2c8
[ 3.280404] console_unlock+0x1a0/0x1e0
[ 3.280414] vprintk_emit+0x1c4/0x2d0
[ 3.280423] dev_vprintk_emit+0x148/0x178
[ 3.280431] dev_printk_emit+0x64/0x88
[ 3.280439] __dev_printk+0x5c/0x7c
[ 3.280447] _dev_info+0x6c/0x90
[ 3.280455] dw_mci_setup_bus+0x114/0x218
[ 3.280467] dw_mci_set_ios+0x12c/0x270
[ 3.280475] mmc_power_up.part.21+0xa4/0xf8
[ 3.280486] mmc_start_host+0xac/0xb8
[ 3.280494] mmc_add_host+0x7c/0xe8
[ 3.280503] dw_mci_probe+0x970/0xfc8
[ 3.280511] dw_mci_pltfm_register+0xa0/0xd8
[ 3.280520] dw_mci_rockchip_probe+0x84/0x148
[ 3.280530] platform_probe+0x68/0xe0
[ 3.280544] really_probe+0xc0/0x2b8
[ 3.280552] __driver_probe_device+0x7c/0xe8
[ 3.280561] driver_probe_device+0x38/0x100
[ 3.280570] __driver_attach_async_helper+0x30/0x58
[ 3.280579] async_run_entry_fn+0x30/0xd8
[ 3.280590] process_one_work+0x1fc/0x350
[ 3.280601] worker_thread+0x44/0x440
[ 3.280609] kthread+0x10c/0x118
[ 3.280617] ret_from_fork+0x10/0x20
[ 3.280639] Code: bad PC value
[ 3.280652] ---[ end trace 0000000000000000 ]---
[ 3.280661] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 3.280667] SMP: stopping secondary CPUs
[ 3.280747] Kernel Offset: disabled
[ 3.280750] CPU features: 0x0000,00000020,00001086
[ 3.280758] Memory Limit: none
[ 3.696667] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
I'm missing something? Let me know.
Thanks in advance.
Regards,
Tommaso
--
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai@...rulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@...rulasolutions.com
www.amarulasolutions.com
Powered by blists - more mailing lists