[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220924080459.13084-2-krzysztof.kozlowski@linaro.org>
Date: Sat, 24 Sep 2022 10:04:28 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sricharan R <sricharan@...eaurora.org>,
Stephan Gerhold <stephan@...hold.net>,
Shawn Guo <shawn.guo@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
krishna Lanka <quic_vamslank@...cinc.com>,
Sivaprakash Murugesan <sivaprak@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 01/32] arm64: dts: qcom: ipq6018-cp01-c1: correct blspi1 pins
When BLSPI1 (originally SPI0, later renamed in commit f82c48d46852
("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
the device node lacked respective pin configuration assignment. It
used also blsp0_spi function but that was probably the same mistake as
naming it SPI0.
Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 1ba2eca33c7b..afc2dc79767d 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -37,6 +37,8 @@ &blsp1_i2c3 {
&blsp1_spi1 {
cs-select = <0>;
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
status = "okay";
flash@0 {
@@ -57,7 +59,7 @@ i2c_1_pins: i2c-1-pins {
spi_0_pins: spi-0-pins {
pins = "gpio38", "gpio39", "gpio40", "gpio41";
- function = "blsp0_spi";
+ function = "blsp1_spi";
drive-strength = <8>;
bias-pull-down;
};
--
2.34.1
Powered by blists - more mailing lists