[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220924080459.13084-5-krzysztof.kozlowski@linaro.org>
Date: Sat, 24 Sep 2022 10:04:31 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sricharan R <sricharan@...eaurora.org>,
Stephan Gerhold <stephan@...hold.net>,
Shawn Guo <shawn.guo@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
krishna Lanka <quic_vamslank@...cinc.com>,
Sivaprakash Murugesan <sivaprak@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 04/32] ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix. Schema
also requires 'function' property, so two nodes for the same gpio (mux
and config) should be merged into one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 45 +++++++------------
1 file changed, 15 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index a4fa468a095f..ac8b4626ae9a 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -282,40 +282,25 @@ &remoteproc_mpss {
};
&tlmm {
- pcie_ep_clkreq_default: pcie_ep_clkreq_default {
- mux {
- pins = "gpio56";
- function = "pcie_clkreq";
- };
- config {
- pins = "gpio56";
- drive-strength = <2>;
- bias-disable;
- };
+ pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+ pins = "gpio56";
+ function = "pcie_clkreq";
+ drive-strength = <2>;
+ bias-disable;
};
- pcie_ep_perst_default: pcie_ep_perst_default {
- mux {
- pins = "gpio57";
- function = "gpio";
- };
- config {
- pins = "gpio57";
- drive-strength = <2>;
- bias-pull-down;
- };
+ pcie_ep_perst_default: pcie-ep-perst-default-state {
+ pins = "gpio57";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
};
- pcie_ep_wake_default: pcie_ep_wake_default {
- mux {
- pins = "gpio53";
- function = "gpio";
- };
- config {
- pins = "gpio53";
- drive-strength = <2>;
- bias-disable;
- };
+ pcie_ep_wake_default: pcie-ep-wake-default-state {
+ pins = "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
};
--
2.34.1
Powered by blists - more mailing lists