[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220924080459.13084-15-krzysztof.kozlowski@linaro.org>
Date: Sat, 24 Sep 2022 10:04:41 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sricharan R <sricharan@...eaurora.org>,
Stephan Gerhold <stephan@...hold.net>,
Shawn Guo <shawn.guo@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
krishna Lanka <quic_vamslank@...cinc.com>,
Sivaprakash Murugesan <sivaprak@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 14/32] dt-bindings: pinctrl: qcom,msm8226: add functions and input-enable
The MSM8226 pinctrl driver supports input-enable, blsp_i2c4, blsp_uart4
and sdc3 functions and DTS already uses it:
qcom-msm8226-samsung-s3ve3g.dtb: pinctrl@...10000: 'blsp1-i2c1', 'blsp1-i2c2', 'blsp1-i2c3', 'blsp1-i2c4', 'blsp1-i2c5' ...
qcom-apq8026-lg-lenok.dtb: pinctrl@...10000: touch-state: 'oneOf' conditional failed, one must be fixed:
'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../bindings/pinctrl/qcom,msm8226-pinctrl.yaml | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index f1d9696a1fe7..e665ae7ffe3c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -78,9 +78,10 @@ $defs:
Specify the alternative function to be configured for the specified
pins. Functions are only valid for gpio pins.
enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
- blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
- blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+ blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3,
+ wlan ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -89,13 +90,10 @@ $defs:
Selects the drive strength for the specified pins, in mA.
bias-pull-down: true
-
bias-pull-up: true
-
bias-disable: true
-
+ input-enable: true
output-high: true
-
output-low: true
required:
--
2.34.1
Powered by blists - more mailing lists