lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <2646812.mvXUDI8C0e@g550jk>
Date:   Sat, 24 Sep 2022 16:40:05 +0200
From:   Luca Weiss <luca@...tu.xyz>
To:     linux-arm-msm@...r.kernel.org, Jack Matthews <jm5112356@...il.com>
Cc:     bartosz.dudziak@...jp.pl, Jack Matthews <jm5112356@...il.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: qcom: pm8226: Add PON node

Hi Jack,

On Dienstag, 23. November 2021 00:52:30 CEST Jack Matthews wrote:
> Add PON node with pwrkey and resin as child nodes.
> Also adds resin, and additional properties to pwrkey.

I just saw that this patch hasn't been applied yet.
As it doesn't apply cleanly anymore can you please rebase it and send a v2? 
Hopefully Bjorn can apply it then :)

Regards
Luca

> 
> Signed-off-by: Jack Matthews <jm5112356@...il.com>
> ---
>  arch/arm/boot/dts/qcom-pm8226.dtsi | 27 +++++++++++++++++++++------
>  1 file changed, 21 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi
> b/arch/arm/boot/dts/qcom-pm8226.dtsi index 666bc6350c50..63f3026c25bf
> 100644
> --- a/arch/arm/boot/dts/qcom-pm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: BSD-3-Clause
>  #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
>  #include <dt-bindings/spmi/spmi.h>
> 
>  &spmi_bus {
> @@ -9,12 +10,26 @@ pm8226_0: pm8226@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> 
> -		pwrkey@800 {
> -			compatible = "qcom,pm8941-pwrkey";
> -			reg = <0x800>;
> -			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> -			debounce = <15625>;
> -			bias-pull-up;
> +		pon: power-on@800 {
> +			compatible = "qcom,pm8916-pon";
> +			reg = <0x0800>;
> +
> +			pm8226_pwrkey: pwrkey {
> +				compatible = "qcom,pm8941-
pwrkey";
> +				interrupts = <0x0 0x8 0 
IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				linux,code = <KEY_POWER>;
> +			};
> +
> +			pm8226_resin: resin {
> +				compatible = "qcom,pm8941-resin";
> +				interrupts = <0x0 0x8 1 
IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +
> +				status = "disabled";
> +			};
>  		};
> 
>  		smbb: charger@...0 {




Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ