[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0373e39a6aa15a2d38e4807acff0cab2e58b6ad7.camel@mediatek.com>
Date: Mon, 26 Sep 2022 06:29:16 +0000
From: CK Hu (胡俊光) <ck.hu@...iatek.com>
To: Jason-JH Lin (林睿祥)
<Jason-JH.Lin@...iatek.com>,
Xinlei Lee (李昕磊)
<Xinlei.Lee@...iatek.com>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"daniel@...ll.ch" <daniel@...ll.ch>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"airlied@...ux.ie" <airlied@...ux.ie>,
Rex-BC Chen (陳柏辰)
<Rex-BC.Chen@...iatek.com>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>
CC: "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
Jitao Shi (石记涛) <jitao.shi@...iatek.com>
Subject: Re: [PATCH v10,2/3] drm: mediatek: Adjust the dpi output format to
MT8186
Hi, Xinlei:
After change the title to 'Set dpi format in mmsys',
Reviewed-by: CK Hu <ck.hu@...iatek.com>
Regards,
CK
On Fri, 2022-09-23 at 17:58 +0800, xinlei.lee@...iatek.com wrote:
> From: Xinlei Lee <xinlei.lee@...iatek.com>
>
> Dpi output needs to adjust the output format to dual edge for MT8186.
>
> Co-developed-by: Jitao Shi <jitao.shi@...iatek.com>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> Signed-off-by: Xinlei Lee <xinlei.lee@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 630a4e301ef6..ad87ecddf58d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -15,6 +15,7 @@
> #include <linux/of_graph.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
> #include <linux/types.h>
>
> #include <video/videomode.h>
> @@ -30,6 +31,7 @@
> #include "mtk_disp_drv.h"
> #include "mtk_dpi_regs.h"
> #include "mtk_drm_ddp_comp.h"
> +#include "mtk_drm_drv.h"
>
> enum mtk_dpi_out_bit_num {
> MTK_DPI_OUT_BIT_NUM_8BITS,
> @@ -67,6 +69,7 @@ struct mtk_dpi {
> struct drm_connector *connector;
> void __iomem *regs;
> struct device *dev;
> + struct device *mmsys_dev;
> struct clk *engine_clk;
> struct clk *pixel_clk;
> struct clk *tvd_clk;
> @@ -135,6 +138,7 @@ struct mtk_dpi_yc_limit {
> * @yuv422_en_bit: Enable bit of yuv422.
> * @csc_enable_bit: Enable bit of CSC.
> * @pixels_per_iter: Quantity of transferred pixels per iteration.
> + * @edge_cfg_in_mmsys: If the edge configuration for DPI's output
> needs to be set in MMSYS.
> */
> struct mtk_dpi_conf {
> unsigned int (*cal_factor)(int clock);
> @@ -153,6 +157,7 @@ struct mtk_dpi_conf {
> u32 yuv422_en_bit;
> u32 csc_enable_bit;
> u32 pixels_per_iter;
> + bool edge_cfg_in_mmsys;
> };
>
> static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val,
> u32 mask)
> @@ -449,8 +454,12 @@ static void mtk_dpi_dual_edge(struct mtk_dpi
> *dpi)
> mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
> dpi->output_fmt ==
> MEDIA_BUS_FMT_RGB888_2X12_LE ?
> EDGE_SEL : 0, EDGE_SEL);
> + if (dpi->conf->edge_cfg_in_mmsys)
> + mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev,
> MTK_DPI_RGB888_DDR_CON);
> } else {
> mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE,
> 0);
> + if (dpi->conf->edge_cfg_in_mmsys)
> + mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev,
> MTK_DPI_RGB888_SDR_CON);
> }
> }
>
> @@ -778,8 +787,10 @@ static int mtk_dpi_bind(struct device *dev,
> struct device *master, void *data)
> {
> struct mtk_dpi *dpi = dev_get_drvdata(dev);
> struct drm_device *drm_dev = data;
> + struct mtk_drm_private *priv = drm_dev->dev_private;
> int ret;
>
> + dpi->mmsys_dev = priv->mmsys_dev;
> ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> DRM_MODE_ENCODER_TMDS);
> if (ret) {
Powered by blists - more mailing lists