[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220926125012.00001f86@huawei.com>
Date: Mon, 26 Sep 2022 12:50:12 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: <linux-kernel@...r.kernel.org>, <stable@...r.kernel.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Kent Gustavsson <kent@...oris.se>,
"Marcus Folkesson" <marcus.folkesson@...il.com>,
Sasha Levin <sashal@...nel.org>
Subject: Re: [PATCH 5.4 042/120] iio:adc:mcp3911: Switch to generic firmware
properties.
On Mon, 26 Sep 2022 12:11:15 +0200
Greg Kroah-Hartman <gregkh@...uxfoundation.org> wrote:
> From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
>
> [ Upstream commit 4efc1c614d334883cce09c38aa3fe74d3fb0bbf0 ]
>
> This allows use of the driver with other types of firmware such as ACPI
> PRP0001 based probing.
>
> Also part of a general attempt to remove direct use of of_ specific
> accessors from IIO.
>
> Added an include for mod_devicetable.h whilst here to cover the
> struct of_device_id definition.
I'd treat this a feature enabling rather than a fix.
It's small however, so if someone has a sent a backport request I'm fine
with it going in stable. If not, probably just unnecessary noise for stable.
Jonathan
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> Cc: Kent Gustavsson <kent@...oris.se>
> Reviewed-by: Marcus Folkesson <marcus.folkesson@...il.com>
> Stable-dep-of: cfbd76d5c9c4 ("iio: adc: mcp3911: correct "microchip,device-addr" property")
> Signed-off-by: Sasha Levin <sashal@...nel.org>
> ---
> drivers/iio/adc/mcp3911.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
> index 4e2e8e819b1e..cd8b1bab9cf0 100644
> --- a/drivers/iio/adc/mcp3911.c
> +++ b/drivers/iio/adc/mcp3911.c
> @@ -10,6 +10,8 @@
> #include <linux/err.h>
> #include <linux/iio/iio.h>
> #include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/property.h>
> #include <linux/regulator/consumer.h>
> #include <linux/spi/spi.h>
>
> @@ -209,12 +211,13 @@ static const struct iio_info mcp3911_info = {
> .write_raw = mcp3911_write_raw,
> };
>
> -static int mcp3911_config(struct mcp3911 *adc, struct device_node *of_node)
> +static int mcp3911_config(struct mcp3911 *adc)
> {
> + struct device *dev = &adc->spi->dev;
> u32 configreg;
> int ret;
>
> - of_property_read_u32(of_node, "device-addr", &adc->dev_addr);
> + device_property_read_u32(dev, "device-addr", &adc->dev_addr);
> if (adc->dev_addr > 3) {
> dev_err(&adc->spi->dev,
> "invalid device address (%i). Must be in range 0-3.\n",
> @@ -298,7 +301,7 @@ static int mcp3911_probe(struct spi_device *spi)
> }
> }
>
> - ret = mcp3911_config(adc, spi->dev.of_node);
> + ret = mcp3911_config(adc);
> if (ret)
> goto clk_disable;
>
Powered by blists - more mailing lists