[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220926125350.64783-1-leo@nabam.net>
Date: Mon, 26 Sep 2022 14:53:48 +0200
From: Lev Popov <leo@...am.net>
To: Lev Popov <leo@...am.net>
Cc: Dan Johansen <strit@...jaro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>,
Peter Geis <pgwipeout@...il.com>,
Nicolas Frattaroli <frattaroli.nicolas@...il.com>,
Michael Riesch <michael.riesch@...fvision.net>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4] arm64: dts: rockchip: fix quartz64-a bluetooth configuration
For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.
Also set max-speed on the bluetooth device as it's not automatically
detected.
Fixes: b33a22a1e7c4248608e533fc4fa524258b3fae84 (arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A)
Signed-off-by: Lev Popov <leo@...am.net>
---
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a05460b92415..25a8c781f4e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -740,7 +740,7 @@ &uart0 {
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
status = "okay";
uart-has-rtscts;
@@ -748,13 +748,14 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
vbat-supply = <&vcc_sys>;
vddio-supply = <&vcca1v8_pmu>;
+ max-speed = <3000000>;
};
};
--
2.37.3
Powered by blists - more mailing lists