| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220926140604.4173723-28-daniel.lezcano@linaro.org>
Date: Mon, 26 Sep 2022 16:06:01 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: daniel.lezcano@...aro.org, rafael@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
rui.zhang@...el.com, Hans de Goede <hdegoede@...hat.com>,
Peter Kästle <peter@...e.net>,
Mark Gross <markgross@...nel.org>,
platform-driver-x86@...r.kernel.org (open list:ACER ASPIRE ONE
TEMPERATURE AND FAN DRIVER)
Subject: [PATCH v5 27/30] thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
Acked-by: Hans de Goede <hdegoede@...hat.com>
Acked-by: Peter Kästle <peter@...e.net>
---
drivers/platform/x86/acerhdf.c | 73 ++++++++++++----------------------
1 file changed, 26 insertions(+), 47 deletions(-)
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 3463629f8764..a7407aa032ba 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -46,6 +46,8 @@
* measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
* assume 89°C is critical temperature.
*/
+#define ACERHDF_DEFAULT_TEMP_FANON 60000
+#define ACERHDF_DEFAULT_TEMP_FANOFF 53000
#define ACERHDF_TEMP_CRIT 89000
#define ACERHDF_FAN_OFF 0
#define ACERHDF_FAN_AUTO 1
@@ -70,8 +72,8 @@ static int kernelmode;
#endif
static unsigned int interval = 10;
-static unsigned int fanon = 60000;
-static unsigned int fanoff = 53000;
+static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
+static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
static unsigned int verbose;
static unsigned int list_supported;
static unsigned int fanstate = ACERHDF_FAN_AUTO;
@@ -137,6 +139,15 @@ struct ctrl_settings {
int mcmd_enable;
};
+static struct thermal_trip trips[] = {
+ [0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
+ .hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
+ .type = THERMAL_TRIP_ACTIVE },
+
+ [1] = { .temperature = ACERHDF_TEMP_CRIT,
+ .type = THERMAL_TRIP_CRITICAL }
+};
+
static struct ctrl_settings ctrl_cfg __read_mostly;
/* Register addresses and values for different BIOS versions */
@@ -326,6 +337,15 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
fanon = ACERHDF_MAX_FANON;
}
+ if (fanon < fanoff) {
+ pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
+ fanoff, fanon, fanon);
+ fanoff = fanon;
+ };
+
+ trips[0].temperature = fanon;
+ trips[0].hysteresis = fanon - fanoff;
+
if (kernelmode && prev_interval != interval) {
if (interval > ACERHDF_MAX_INTERVAL) {
pr_err("interval too high, set to %d\n",
@@ -424,43 +444,6 @@ static int acerhdf_change_mode(struct thermal_zone_device *thermal,
return 0;
}
-static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
- enum thermal_trip_type *type)
-{
- if (trip == 0)
- *type = THERMAL_TRIP_ACTIVE;
- else if (trip == 1)
- *type = THERMAL_TRIP_CRITICAL;
- else
- return -EINVAL;
-
- return 0;
-}
-
-static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
- int *temp)
-{
- if (trip != 0)
- return -EINVAL;
-
- *temp = fanon - fanoff;
-
- return 0;
-}
-
-static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
- int *temp)
-{
- if (trip == 0)
- *temp = fanon;
- else if (trip == 1)
- *temp = ACERHDF_TEMP_CRIT;
- else
- return -EINVAL;
-
- return 0;
-}
-
static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
int *temperature)
{
@@ -474,13 +457,9 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
.unbind = acerhdf_unbind,
.get_temp = acerhdf_get_ec_temp,
.change_mode = acerhdf_change_mode,
- .get_trip_type = acerhdf_get_trip_type,
- .get_trip_hyst = acerhdf_get_trip_hyst,
- .get_trip_temp = acerhdf_get_trip_temp,
.get_crit_temp = acerhdf_get_crit_temp,
};
-
/*
* cooling device callback functions
* get maximal fan cooling state
@@ -710,10 +689,10 @@ static int __init acerhdf_register_thermal(void)
if (IS_ERR(cl_dev))
return -EINVAL;
- thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
- &acerhdf_dev_ops,
- &acerhdf_zone_params, 0,
- (kernelmode) ? interval*1000 : 0);
+ thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
+ 0, NULL, &acerhdf_dev_ops,
+ &acerhdf_zone_params, 0,
+ (kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
return -EINVAL;
--
2.34.1
Powered by blists - more mailing lists