lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220926183727.1893566-1-aurelien@aurel32.net>
Date:   Mon, 26 Sep 2022 20:37:14 +0200
From:   Aurelien Jarno <aurelien@...el32.net>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Heiko Stuebner <heiko@...ech.de>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Rockchip SoC
        support),
        linux-rockchip@...ts.infradead.org (open list:ARM/Rockchip SoC support),
        linux-kernel@...r.kernel.org (open list)
Cc:     Dongjin Kim <tobetter@...il.com>,
        Aurelien Jarno <aurelien@...el32.net>
Subject: [PATCH v2 00/13] Add support for the Hardkernel ODROID-M1 board

On the ODROID forum, Dongjin Kim said he is not planning to submit a new
version of the patchset adding support for the Hardkernel ODROID-M1
board. I therefore decided to address the issues reported during the
initial review, and I also did some small fixes either because some
things changed in the meantime on the kernel side or because I noticed
some warning or issues when using the hardware.

I continued writing some additional patches to complete the ODROID M1
DTS to almost fully support the hardware, the drivers being already
present in the kernel.

Changes since v1 (patches 1 & 2):
* Added Acked-by to the first patch
* Fixed indentation
* Removed unneeded labels
* Renamed labels to not use underscore
* Renamed regulator nodes
* Added -pin to pinctrl bindings
* Changed GPU related regulators to always on (see 2cda380102ff)
* Added phy-supply to gmac0
* Added supplies to sdhci
* Changed SD card speed to SDR50 from SDR104 (see 1ea90b2d293f)
* Fixed power LED polarity and set the default-state to "keep"

Aurelien Jarno (11):
  arm64: dts: rockchip: add thermal support to ODROID-M1
  arm64: dts: rockchip: Add NOR flash to ODROID-M1
  arm64: dts: rockchip: Add analog audio on ODROID-M1
  arm64: dts: rockchip: Enable vop2 and hdmi tx on ODROID-M1
  arm64: dts: rockchip: Enable HDMI audio on ODROID-M1.
  arm64: dts: rockchip: Enable the GPU on ODROID-M1
  arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1
  arm64: dts: rockchip: Enable the USB 3.0 ports on ODROID-M1
  arm64: dts: rockchip: Add SATA support to ODROID-M1
  arm64: dts: rockchip: Add PCIEe v3 nodes to ODROID-M1
  arm64: dts: rockchip: Add IR receiver node to ODROID-M1

Dongjin Kim (2):
  dt-bindings: rockchip: Add Hardkernel ODROID-M1 board
  arm64: dts: rockchip: Add Hardkernel ODROID-M1 board

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3568-odroid-m1.dts    | 727 ++++++++++++++++++
 3 files changed, 733 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts

-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ