linux-kernel - Re: [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe controller on rock3a

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CANAwSgTyt2D-aEMMowO6d+0ddTQb46o0pWMahnr7ny2rjY7iaQ@mail.gmail.com>
Date:   Tue, 27 Sep 2022 19:16:25 +0530
From:   Anand Moon <linux.amoon@...il.com>
To:     Chukun Pan <amadeus@....edu.cn>
Cc:     heiko@...ech.de, krzysztof.kozlowski+dt@...aro.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-rockchip@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org,
        michael.riesch@...fvision.net, robh+dt@...nel.org
Subject: Re: [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe
 controller on rock3a

Hi Chukun,

On Mon, 26 Sept 2022 at 23:31, Chukun Pan <amadeus@....edu.cn> wrote:
>
> Hi,
>
> On 26-09-22, 06:14, Anand Moon wrote:
>
> > +     pcie30_3v3: gpio-regulator {
> > +             compatible = "regulator-gpio";
> > +             regulator-name = "pcie30_3v3";
> > +             regulator-min-microvolt = <100000>;
> > +             regulator-max-microvolt = <3300000>;
> > +             gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> > +             gpios-states = <0x1>;
> > +             states = <100000 0x0>, <3300000 0x1>;
> > +     };
>
> This is actually no different from vcc3v3-pcie regulator?
>
> > +&pcie30phy {
> > +     data-lanes = <0 1 2 3>;
> > +     phy-supply = <&vcc3v3_pi6c_03>;
> > +     status = "okay";
> > +};
>
> It seems that there is no need to define additional data-lanes when
> the pcie3x1 node is not enabled, and phy-supply seems unnecessary on
> this board.
>
As per the schematic below pice support with 2 regulators

VCC3V3_PCIE        (SCT2250FPA)
VCC3V3_PI6C_03  (PI6C557-03 is a spread spectrum clock generator
supporting PCI Express and Ethernet requirements)

[0] https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_sch.pdf

> Excuse me, can you try the patches I posted? Lspci can recognize
> pcie3x2 normally, but I don't have a spare nvme hard drive right
> now to test if it works.
>

No, it did not work on my board, see bool logs.
[0] https://pastebin.com/Lk93VFxg

[ 0.725985] phy phy-fe8c0000.phy.4: lane number 0, val 1
[ 0.726975] phy phy-fe8c0000.phy.4: rockchip_p3phy_rk3568_init: lock
failed 0x6890000, check input refclk and power supply
[ 0.728172] phy phy-fe8c0000.phy.4: phy init failed --> -110
[ 0.728704] rockchip-dw-pcie: probe of 3c0800000.pcie failed with error -110
[ 0.745193] ALSA device list:

Thanks
-Anand

> Thanks, Chukun
>
> ---
> Chukun Pan (3):
>   arm64: dts: rockchip: Add regulator suffix to ROCK3 Model A
>   arm64: dts: rockchip: Rename pinctrl label of pcie2x1 on rock-3a
>   arm64: dts: rockchip: Add PCIe v3 nodes to rock-3a
>
>  .../boot/dts/rockchip/rk3568-rock-3a.dts      | 36 ++++++++++++++-----
>  1 file changed, 27 insertions(+), 9 deletions(-)
>
> --
> 2.25.1
>