| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220928155519.31977-6-matthias.bgg@kernel.org>
Date: Wed, 28 Sep 2022 17:55:16 +0200
From: matthias.bgg@...nel.org
To: roger.lu@...iatek.com, jia-wei.chang@...iatek.com
Cc: nfraprado@...labora.com, khilman@...libre.com,
linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
angelogioacchino.delregno@...labora.com,
Matthias Brugger <matthias.bgg@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>
Subject: [PATCH 5/8] soc: mediatek: mtk-svs: Move SoC specific functions to new files
From: Matthias Brugger <matthias.bgg@...il.com>
With every SoC added to the driver, it grows. Move SoC specific
callbacks to a new source files.
Signed-off-by: Matthias Brugger <matthias.bgg@...il.com>
---
drivers/soc/mediatek/Makefile | 3 +-
drivers/soc/mediatek/mt8183-svs.h | 113 ++++
drivers/soc/mediatek/mt8192-svs.h | 64 ++
drivers/soc/mediatek/mtk-svs-mt8183.c | 234 ++++++++
drivers/soc/mediatek/mtk-svs-mt8192.c | 100 ++++
drivers/soc/mediatek/mtk-svs.c | 831 ++------------------------
drivers/soc/mediatek/mtk-svs.h | 279 +++++++++
7 files changed, 837 insertions(+), 787 deletions(-)
create mode 100644 drivers/soc/mediatek/mt8183-svs.h
create mode 100644 drivers/soc/mediatek/mt8192-svs.h
create mode 100644 drivers/soc/mediatek/mtk-svs-mt8183.c
create mode 100644 drivers/soc/mediatek/mtk-svs-mt8192.c
create mode 100644 drivers/soc/mediatek/mtk-svs.h
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index 0e9e703c931a..851131638644 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mutex.o
-obj-$(CONFIG_MTK_SVS) += mtk-svs.o
+mtk_svs-objs := mtk-svs.o mtk-svs-mt8183.o mtk-svs-mt8192.o
+obj-$(CONFIG_MTK_SVS) += mtk_svs.o
diff --git a/drivers/soc/mediatek/mt8183-svs.h b/drivers/soc/mediatek/mt8183-svs.h
new file mode 100644
index 000000000000..89c0deb9fb11
--- /dev/null
+++ b/drivers/soc/mediatek/mt8183-svs.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __DRV_SVS_MT8183_H
+#define __DRV_SVS_MT8183_H
+
+static struct svs_bank svs_mt8183_banks[] = {
+ {
+ .sw_id = SVSB_CPU_LITTLE,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .cpu_id = 0,
+ .buck_name = "proc",
+ .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1989000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x64,
+ .vmin = 0x18,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x7,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0000,
+ .int_st = BIT(0),
+ .ctl0 = 0x00010001,
+ },
+ {
+ .sw_id = SVSB_CPU_BIG,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .cpu_id = 4,
+ .buck_name = "proc",
+ .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1989000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x58,
+ .vmin = 0x10,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x7,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0001,
+ .int_st = BIT(1),
+ .ctl0 = 0x00000001,
+ },
+ {
+ .sw_id = SVSB_CCI,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .buck_name = "proc",
+ .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 1196000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x64,
+ .vmin = 0x18,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x7,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0002,
+ .int_st = BIT(2),
+ .ctl0 = 0x00100003,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .set_freq_pct = svs_set_bank_freq_pct_v2,
+ .get_volts = svs_get_bank_volts_v2,
+ .buck_name = "mali",
+ .tzone_name = "tzts2",
+ .volt_flags = SVSB_INIT01_PD_REQ |
+ SVSB_INIT01_VOLT_INC_ONLY,
+ .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02 |
+ SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 900000000,
+ .vboot = 0x30,
+ .volt_step = 6250,
+ .volt_base = 500000,
+ .vmax = 0x40,
+ .vmin = 0x14,
+ .age_config = 0x555555,
+ .dc_config = 0x555555,
+ .dvt_fixed = 0x3,
+ .vco = 0x10,
+ .chk_shift = 0x77,
+ .core_sel = 0x8fff0003,
+ .int_st = BIT(3),
+ .ctl0 = 0x00050001,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 0,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 3,
+ },
+};
+
+bool svs_mt8183_efuse_parsing(struct svs_platform *svsp);
+int svs_mt8183_platform_probe(struct svs_platform *svsp);
+
+#endif
diff --git a/drivers/soc/mediatek/mt8192-svs.h b/drivers/soc/mediatek/mt8192-svs.h
new file mode 100644
index 000000000000..6571ebcb2c0f
--- /dev/null
+++ b/drivers/soc/mediatek/mt8192-svs.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __DRV_SVS_MT8192_H
+#define __DRV_SVS_MT8192_H
+
+static struct svs_bank svs_mt8192_banks[] = {
+ {
+ .sw_id = SVSB_GPU,
+ .type = SVSB_LOW,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
+ .mode_support = SVSB_MODE_INIT02,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 688000000,
+ .turn_freq_base = 688000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x60,
+ .vmin = 0x1a,
+ .age_config = 0x555555,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x1,
+ .vco = 0x18,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0100,
+ .int_st = BIT(0),
+ .ctl0 = 0x00540003,
+ },
+ {
+ .sw_id = SVSB_GPU,
+ .type = SVSB_HIGH,
+ .set_freq_pct = svs_set_bank_freq_pct_v3,
+ .get_volts = svs_get_bank_volts_v3,
+ .tzone_name = "gpu1",
+ .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
+ SVSB_MON_VOLT_IGNORE,
+ .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
+ .opp_count = MAX_OPP_ENTRIES,
+ .freq_base = 902000000,
+ .turn_freq_base = 688000000,
+ .volt_step = 6250,
+ .volt_base = 400000,
+ .vmax = 0x60,
+ .vmin = 0x1a,
+ .age_config = 0x555555,
+ .dc_config = 0x1,
+ .dvt_fixed = 0x6,
+ .vco = 0x18,
+ .chk_shift = 0x87,
+ .core_sel = 0x0fff0101,
+ .int_st = BIT(1),
+ .ctl0 = 0x00540003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 0,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 7,
+ },
+};
+
+bool svs_mt8192_efuse_parsing(struct svs_platform *svsp);
+int svs_mt8192_platform_probe(struct svs_platform *svsp);
+
+#endif
diff --git a/drivers/soc/mediatek/mtk-svs-mt8183.c b/drivers/soc/mediatek/mtk-svs-mt8183.c
new file mode 100644
index 000000000000..a97fcae59dd7
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-svs-mt8183.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "mtk-svs.h"
+
+bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ int format[6], x_roomt[6], o_vtsmcu[5], o_vtsabb, tb_roomt = 0;
+ int adc_ge_t, adc_oe_t, ge, oe, gain, degc_cali, adc_cali_en_t;
+ int o_slope, o_slope_sign, ts_id;
+ u32 idx, i, ft_pgm, mts, temp0, temp1, temp2;
+ int ret;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[2]) {
+ dev_notice(svsp->dev, "svs_efuse[2] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ ft_pgm = (svsp->efuse[0] >> 4) & GENMASK(3, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (ft_pgm <= 1)
+ svsb->volt_flags |= SVSB_INIT01_VOLT_IGNORE;
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ svsb->bdes = svsp->efuse[16] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[16] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[16] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[16] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = (svsp->efuse[17] >> 16) & GENMASK(7, 0);
+
+ if (ft_pgm <= 3)
+ svsb->volt_od += 10;
+ else
+ svsb->volt_od += 2;
+ break;
+ case SVSB_CPU_BIG:
+ svsb->bdes = svsp->efuse[18] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[18] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[18] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[18] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[17] & GENMASK(7, 0);
+
+ if (ft_pgm <= 3)
+ svsb->volt_od += 15;
+ else
+ svsb->volt_od += 12;
+ break;
+ case SVSB_CCI:
+ svsb->bdes = svsp->efuse[4] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[4] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[4] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[4] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0);
+
+ if (ft_pgm <= 3)
+ svsb->volt_od += 10;
+ else
+ svsb->volt_od += 2;
+ break;
+ case SVSB_GPU:
+ svsb->bdes = svsp->efuse[6] & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[6] >> 8) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[6] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[6] >> 24) & GENMASK(7, 0);
+ svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0);
+
+ if (ft_pgm >= 2) {
+ svsb->freq_base = 800000000; /* 800MHz */
+ svsb->dvt_fixed = 2;
+ }
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return false;
+ }
+ }
+
+ ret = svs_thermal_efuse_get_data(svsp);
+ if (ret)
+ return false;
+
+ /* Thermal efuse parsing */
+ adc_ge_t = (svsp->tefuse[1] >> 22) & GENMASK(9, 0);
+ adc_oe_t = (svsp->tefuse[1] >> 12) & GENMASK(9, 0);
+
+ o_vtsmcu[0] = (svsp->tefuse[0] >> 17) & GENMASK(8, 0);
+ o_vtsmcu[1] = (svsp->tefuse[0] >> 8) & GENMASK(8, 0);
+ o_vtsmcu[2] = svsp->tefuse[1] & GENMASK(8, 0);
+ o_vtsmcu[3] = (svsp->tefuse[2] >> 23) & GENMASK(8, 0);
+ o_vtsmcu[4] = (svsp->tefuse[2] >> 5) & GENMASK(8, 0);
+ o_vtsabb = (svsp->tefuse[2] >> 14) & GENMASK(8, 0);
+
+ degc_cali = (svsp->tefuse[0] >> 1) & GENMASK(5, 0);
+ adc_cali_en_t = svsp->tefuse[0] & BIT(0);
+ o_slope_sign = (svsp->tefuse[0] >> 7) & BIT(0);
+
+ ts_id = (svsp->tefuse[1] >> 9) & BIT(0);
+ o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
+
+ if (adc_cali_en_t == 1) {
+ if (!ts_id)
+ o_slope = 0;
+
+ if (adc_ge_t < 265 || adc_ge_t > 758 ||
+ adc_oe_t < 265 || adc_oe_t > 758 ||
+ o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
+ o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
+ o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
+ o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
+ o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
+ o_vtsabb < -8 || o_vtsabb > 484 ||
+ degc_cali < 1 || degc_cali > 63) {
+ dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
+ goto remove_mt8183_svsb_mon_mode;
+ }
+ } else {
+ dev_err(svsp->dev, "no thermal efuse, no mon mode\n");
+ goto remove_mt8183_svsb_mon_mode;
+ }
+
+ ge = ((adc_ge_t - 512) * 10000) / 4096;
+ oe = (adc_oe_t - 512);
+ gain = (10000 + ge);
+
+ format[0] = (o_vtsmcu[0] + 3350 - oe);
+ format[1] = (o_vtsmcu[1] + 3350 - oe);
+ format[2] = (o_vtsmcu[2] + 3350 - oe);
+ format[3] = (o_vtsmcu[3] + 3350 - oe);
+ format[4] = (o_vtsmcu[4] + 3350 - oe);
+ format[5] = (o_vtsabb + 3350 - oe);
+
+ for (i = 0; i < 6; i++)
+ x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / gain;
+
+ temp0 = (10000 * 100000 / gain) * 15 / 18;
+
+ if (!o_slope_sign)
+ mts = (temp0 * 10) / (1534 + o_slope * 10);
+ else
+ mts = (temp0 * 10) / (1534 - o_slope * 10);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = mts;
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ tb_roomt = x_roomt[3];
+ break;
+ case SVSB_CPU_BIG:
+ tb_roomt = x_roomt[4];
+ break;
+ case SVSB_CCI:
+ tb_roomt = x_roomt[3];
+ break;
+ case SVSB_GPU:
+ tb_roomt = x_roomt[1];
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ goto remove_mt8183_svsb_mon_mode;
+ }
+
+ temp0 = (degc_cali * 10 / 2);
+ temp1 = ((10000 * 100000 / 4096 / gain) *
+ oe + tb_roomt * 10) * 15 / 18;
+
+ if (!o_slope_sign)
+ temp2 = temp1 * 100 / (1534 + o_slope * 10);
+ else
+ temp2 = temp1 * 100 / (1534 - o_slope * 10);
+
+ svsb->bts = (temp0 + temp2 - 250) * 4 / 10;
+ }
+
+ return true;
+
+remove_mt8183_svsb_mon_mode:
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mode_support &= ~SVSB_MODE_MON;
+ }
+
+ return true;
+}
+
+int svs_mt8183_platform_probe(struct svs_platform *svsp)
+{
+ struct device *dev;
+ struct svs_bank *svsb;
+ u32 idx;
+
+ dev = svs_add_device_link(svsp, "thermal");
+ if (IS_ERR(dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(dev),
+ "failed to get thermal device\n");
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ switch (svsb->sw_id) {
+ case SVSB_CPU_LITTLE:
+ case SVSB_CPU_BIG:
+ svsb->opp_dev = get_cpu_device(svsb->cpu_id);
+ break;
+ case SVSB_CCI:
+ svsb->opp_dev = svs_add_device_link(svsp, "cci");
+ break;
+ case SVSB_GPU:
+ svsb->opp_dev = svs_add_device_link(svsp, "gpu");
+ break;
+ default:
+ dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
+ return -EINVAL;
+ }
+
+ if (IS_ERR(svsb->opp_dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
+ "failed to get OPP device for bank %d\n",
+ idx);
+ }
+
+ return 0;
+}
diff --git a/drivers/soc/mediatek/mtk-svs-mt8192.c b/drivers/soc/mediatek/mtk-svs-mt8192.c
new file mode 100644
index 000000000000..838a94834741
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-svs-mt8192.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "mtk-svs.h"
+
+bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ u32 idx, i, vmin, golden_temp;
+ int ret;
+
+ for (i = 0; i < svsp->efuse_max; i++)
+ if (svsp->efuse[i])
+ dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ if (!svsp->efuse[9]) {
+ dev_notice(svsp->dev, "svs_efuse[9] = 0x0?\n");
+ return false;
+ }
+
+ /* Svs efuse parsing */
+ vmin = (svsp->efuse[19] >> 4) & GENMASK(1, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (vmin == 0x1)
+ svsb->vmin = 0x1e;
+
+ if (svsb->type == SVSB_LOW) {
+ svsb->mtdes = svsp->efuse[10] & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[10] >> 16) & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[10] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[17]) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[17] >> 8) & GENMASK(7, 0);
+ } else if (svsb->type == SVSB_HIGH) {
+ svsb->mtdes = svsp->efuse[9] & GENMASK(7, 0);
+ svsb->bdes = (svsp->efuse[9] >> 16) & GENMASK(7, 0);
+ svsb->mdes = (svsp->efuse[9] >> 24) & GENMASK(7, 0);
+ svsb->dcbdet = (svsp->efuse[17] >> 16) & GENMASK(7, 0);
+ svsb->dcmdet = (svsp->efuse[17] >> 24) & GENMASK(7, 0);
+ }
+
+ svsb->vmax += svsb->dvt_fixed;
+ }
+
+ ret = svs_thermal_efuse_get_data(svsp);
+ if (ret)
+ return false;
+
+ for (i = 0; i < svsp->tefuse_max; i++)
+ if (svsp->tefuse[i] != 0)
+ break;
+
+ if (i == svsp->tefuse_max)
+ golden_temp = 50; /* All thermal efuse data are 0 */
+ else
+ golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+ svsb->mts = 500;
+ svsb->bts = (((500 * golden_temp + 250460) / 1000) - 25) * 4;
+ }
+
+ return true;
+}
+
+int svs_mt8192_platform_probe(struct svs_platform *svsp)
+{
+ struct device *dev;
+ struct svs_bank *svsb;
+ u32 idx;
+
+ svsp->rst = devm_reset_control_get_optional(svsp->dev, "svs_rst");
+ if (IS_ERR(svsp->rst))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst),
+ "cannot get svs reset control\n");
+
+ dev = svs_add_device_link(svsp, "lvts");
+ if (IS_ERR(dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(dev),
+ "failed to get lvts device\n");
+
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ if (svsb->type == SVSB_HIGH)
+ svsb->opp_dev = svs_add_device_link(svsp, "mali");
+ else if (svsb->type == SVSB_LOW)
+ svsb->opp_dev = svs_get_subsys_device(svsp, "mali");
+
+ if (IS_ERR(svsb->opp_dev))
+ return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
+ "failed to get OPP device for bank %d\n",
+ idx);
+ }
+
+ return 0;
+}
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index 482cc8d7e7cf..714eb93160f5 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -9,7 +9,6 @@
#include <linux/completion.h>
#include <linux/cpuidle.h>
#include <linux/debugfs.h>
-#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -19,40 +18,19 @@
#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
-#include <linux/reset.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/thermal.h>
-/* svs bank 1-line software id */
-#define SVSB_CPU_LITTLE BIT(0)
-#define SVSB_CPU_BIG BIT(1)
-#define SVSB_CCI BIT(2)
-#define SVSB_GPU BIT(3)
-
-/* svs bank 2-line type */
-#define SVSB_LOW BIT(8)
-#define SVSB_HIGH BIT(9)
-
-/* svs bank mode support */
-#define SVSB_MODE_ALL_DISABLE 0
-#define SVSB_MODE_INIT01 BIT(1)
-#define SVSB_MODE_INIT02 BIT(2)
-#define SVSB_MODE_MON BIT(3)
-
-/* svs bank volt flags */
-#define SVSB_INIT01_PD_REQ BIT(0)
-#define SVSB_INIT01_VOLT_IGNORE BIT(1)
-#define SVSB_INIT01_VOLT_INC_ONLY BIT(2)
-#define SVSB_MON_VOLT_IGNORE BIT(16)
-#define SVSB_REMOVE_DVTFIXED_VOLT BIT(24)
+#include "mtk-svs.h"
+#include "mt8183-svs.h"
+#include "mt8192-svs.h"
/* svs bank register fields and common configuration */
#define SVSB_PTPCONFIG_DETMAX GENMASK(15, 0)
@@ -129,129 +107,12 @@
/* svs bank related setting */
#define BITS8 8
-#define MAX_OPP_ENTRIES 16
#define REG_BYTES 4
#define SVSB_DC_SIGNED_BIT BIT(15)
#define SVSB_DET_CLK_EN BIT(31)
#define SVSB_TEMP_LOWER_BOUND 0xb2
#define SVSB_TEMP_UPPER_BOUND 0x64
-static DEFINE_SPINLOCK(svs_lock);
-
-#define debug_fops_ro(name) \
- static int svs_##name##_debug_open(struct inode *inode, \
- struct file *filp) \
- { \
- return single_open(filp, svs_##name##_debug_show, \
- inode->i_private); \
- } \
- static const struct file_operations svs_##name##_debug_fops = { \
- .owner = THIS_MODULE, \
- .open = svs_##name##_debug_open, \
- .read = seq_read, \
- .llseek = seq_lseek, \
- .release = single_release, \
- }
-
-#define debug_fops_rw(name) \
- static int svs_##name##_debug_open(struct inode *inode, \
- struct file *filp) \
- { \
- return single_open(filp, svs_##name##_debug_show, \
- inode->i_private); \
- } \
- static const struct file_operations svs_##name##_debug_fops = { \
- .owner = THIS_MODULE, \
- .open = svs_##name##_debug_open, \
- .read = seq_read, \
- .write = svs_##name##_debug_write, \
- .llseek = seq_lseek, \
- .release = single_release, \
- }
-
-#define svs_dentry_data(name) {__stringify(name), &svs_##name##_debug_fops}
-
-/**
- * enum svsb_phase - svs bank phase enumeration
- * @SVSB_PHASE_ERROR: svs bank encounters unexpected condition
- * @SVSB_PHASE_INIT01: svs bank basic init for data calibration
- * @SVSB_PHASE_INIT02: svs bank can provide voltages to opp table
- * @SVSB_PHASE_MON: svs bank can provide voltages with thermal effect
- * @SVSB_PHASE_MAX: total number of svs bank phase (debug purpose)
- *
- * Each svs bank has its own independent phase and we enable each svs bank by
- * running their phase orderly. However, when svs bank encounters unexpected
- * condition, it will fire an irq (PHASE_ERROR) to inform svs software.
- *
- * svs bank general phase-enabled order:
- * SVSB_PHASE_INIT01 -> SVSB_PHASE_INIT02 -> SVSB_PHASE_MON
- */
-enum svsb_phase {
- SVSB_PHASE_ERROR = 0,
- SVSB_PHASE_INIT01,
- SVSB_PHASE_INIT02,
- SVSB_PHASE_MON,
- SVSB_PHASE_MAX,
-};
-
-enum svs_reg_index {
- DESCHAR = 0,
- TEMPCHAR,
- DETCHAR,
- AGECHAR,
- DCCONFIG,
- AGECONFIG,
- FREQPCT30,
- FREQPCT74,
- LIMITVALS,
- VBOOT,
- DETWINDOW,
- CONFIG,
- TSCALCS,
- RUNCONFIG,
- SVSEN,
- INIT2VALS,
- DCVALUES,
- AGEVALUES,
- VOP30,
- VOP74,
- TEMP,
- INTSTS,
- INTSTSRAW,
- INTEN,
- CHKINT,
- CHKSHIFT,
- STATUS,
- VDESIGN30,
- VDESIGN74,
- DVT30,
- DVT74,
- AGECOUNT,
- SMSTATE0,
- SMSTATE1,
- CTL0,
- DESDETSEC,
- TEMPAGESEC,
- CTRLSPARE0,
- CTRLSPARE1,
- CTRLSPARE2,
- CTRLSPARE3,
- CORESEL,
- THERMINTST,
- INTST,
- THSTAGE0ST,
- THSTAGE1ST,
- THSTAGE2ST,
- THAHBST0,
- THAHBST1,
- SPARE0,
- SPARE1,
- SPARE2,
- SPARE3,
- THSLPEVEB,
- SVS_REG_MAX,
-};
-
static const u32 svs_regs_v2[] = {
[DESCHAR] = 0xc00,
[TEMPCHAR] = 0xc04,
@@ -309,35 +170,41 @@ static const u32 svs_regs_v2[] = {
[THSLPEVEB] = 0xf30,
};
-/**
- * struct svs_platform - svs platform control
- * @base: svs platform register base
- * @dev: svs platform device
- * @main_clk: main clock for svs bank
- * @pbank: svs bank pointer needing to be protected by spin_lock section
- * @banks: svs banks that svs platform supports
- * @rst: svs platform reset control
- * @efuse_max: total number of svs efuse
- * @tefuse_max: total number of thermal efuse
- * @regs: svs platform registers map
- * @bank_max: total number of svs banks
- * @efuse: svs efuse data received from NVMEM framework
- * @tefuse: thermal efuse data received from NVMEM framework
- */
-struct svs_platform {
- void __iomem *base;
- struct device *dev;
- struct clk *main_clk;
- struct svs_bank *pbank;
- struct svs_bank *banks;
- struct reset_control *rst;
- size_t efuse_max;
- size_t tefuse_max;
- const u32 *regs;
- u32 bank_max;
- u32 *efuse;
- u32 *tefuse;
-};
+static DEFINE_SPINLOCK(svs_lock);
+
+#define debug_fops_ro(name) \
+ static int svs_##name##_debug_open(struct inode *inode, \
+ struct file *filp) \
+ { \
+ return single_open(filp, svs_##name##_debug_show, \
+ inode->i_private); \
+ } \
+ static const struct file_operations svs_##name##_debug_fops = { \
+ .owner = THIS_MODULE, \
+ .open = svs_##name##_debug_open, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+#define debug_fops_rw(name) \
+ static int svs_##name##_debug_open(struct inode *inode, \
+ struct file *filp) \
+ { \
+ return single_open(filp, svs_##name##_debug_show, \
+ inode->i_private); \
+ } \
+ static const struct file_operations svs_##name##_debug_fops = { \
+ .owner = THIS_MODULE, \
+ .open = svs_##name##_debug_open, \
+ .read = seq_read, \
+ .write = svs_##name##_debug_write, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+#define svs_dentry_data(name) {__stringify(name), &svs_##name##_debug_fops}
+
struct svs_platform_data {
char *name;
@@ -348,127 +215,6 @@ struct svs_platform_data {
u32 bank_max;
};
-/**
- * struct svs_bank - svs bank representation
- * @dev: bank device
- * @opp_dev: device for opp table/buck control
- * @init_completion: the timeout completion for bank init
- * @buck: regulator used by opp_dev
- * @tzd: thermal zone device for getting temperature
- * @lock: mutex lock to protect voltage update process
- * @set_freq_pct: function pointer to set bank frequency percent table
- * @get_volts: function pointer to get bank voltages
- * @name: bank name
- * @buck_name: regulator name
- * @tzone_name: thermal zone name
- * @phase: bank current phase
- * @volt_od: bank voltage overdrive
- * @reg_data: bank register data in different phase for debug purpose
- * @pm_runtime_enabled_count: bank pm runtime enabled count
- * @mode_support: bank mode support.
- * @freq_base: reference frequency for bank init
- * @turn_freq_base: refenrece frequency for 2-line turn point
- * @vboot: voltage request for bank init01 only
- * @opp_dfreq: default opp frequency table
- * @opp_dvolt: default opp voltage table
- * @freq_pct: frequency percent table for bank init
- * @volt: bank voltage table
- * @volt_step: bank voltage step
- * @volt_base: bank voltage base
- * @volt_flags: bank voltage flags
- * @vmax: bank voltage maximum
- * @vmin: bank voltage minimum
- * @age_config: bank age configuration
- * @age_voffset_in: bank age voltage offset
- * @dc_config: bank dc configuration
- * @dc_voffset_in: bank dc voltage offset
- * @dvt_fixed: bank dvt fixed value
- * @vco: bank VCO value
- * @chk_shift: bank chicken shift
- * @core_sel: bank selection
- * @opp_count: bank opp count
- * @int_st: bank interrupt identification
- * @sw_id: bank software identification
- * @cpu_id: cpu core id for SVS CPU bank use only
- * @ctl0: TS-x selection
- * @temp: bank temperature
- * @tzone_htemp: thermal zone high temperature threshold
- * @tzone_htemp_voffset: thermal zone high temperature voltage offset
- * @tzone_ltemp: thermal zone low temperature threshold
- * @tzone_ltemp_voffset: thermal zone low temperature voltage offset
- * @bts: svs efuse data
- * @mts: svs efuse data
- * @bdes: svs efuse data
- * @mdes: svs efuse data
- * @mtdes: svs efuse data
- * @dcbdet: svs efuse data
- * @dcmdet: svs efuse data
- * @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank
- * @type: bank type to represent it is 2-line (high/low) bank or 1-line bank
- *
- * Svs bank will generate suitalbe voltages by below general math equation
- * and provide these voltages to opp voltage table.
- *
- * opp_volt[i] = (volt[i] * volt_step) + volt_base;
- */
-struct svs_bank {
- struct device *dev;
- struct device *opp_dev;
- struct completion init_completion;
- struct regulator *buck;
- struct thermal_zone_device *tzd;
- struct mutex lock; /* lock to protect voltage update process */
- void (*set_freq_pct)(struct svs_platform *svsp);
- void (*get_volts)(struct svs_platform *svsp);
- char *name;
- char *buck_name;
- char *tzone_name;
- enum svsb_phase phase;
- s32 volt_od;
- u32 reg_data[SVSB_PHASE_MAX][SVS_REG_MAX];
- u32 pm_runtime_enabled_count;
- u32 mode_support;
- u32 freq_base;
- u32 turn_freq_base;
- u32 vboot;
- u32 opp_dfreq[MAX_OPP_ENTRIES];
- u32 opp_dvolt[MAX_OPP_ENTRIES];
- u32 freq_pct[MAX_OPP_ENTRIES];
- u32 volt[MAX_OPP_ENTRIES];
- u32 volt_step;
- u32 volt_base;
- u32 volt_flags;
- u32 vmax;
- u32 vmin;
- u32 age_config;
- u32 age_voffset_in;
- u32 dc_config;
- u32 dc_voffset_in;
- u32 dvt_fixed;
- u32 vco;
- u32 chk_shift;
- u32 core_sel;
- u32 opp_count;
- u32 int_st;
- u32 sw_id;
- u32 cpu_id;
- u32 ctl0;
- u32 temp;
- u32 tzone_htemp;
- u32 tzone_htemp_voffset;
- u32 tzone_ltemp;
- u32 tzone_ltemp_voffset;
- u32 bts;
- u32 mts;
- u32 bdes;
- u32 mdes;
- u32 mtdes;
- u32 dcbdet;
- u32 dcmdet;
- u32 turn_pt;
- u32 type;
-};
-
static u32 percent(u32 numerator, u32 denominator)
{
/* If not divide 1000, "numerator * 100" will have data overflow. */
@@ -851,7 +597,7 @@ static u32 interpolate(u32 f0, u32 f1, u32 v0, u32 v1, u32 fx)
return DIV_ROUND_UP(vx, 100);
}
-static void svs_get_bank_volts_v3(struct svs_platform *svsp)
+void svs_get_bank_volts_v3(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
u32 i, j, *vop, vop74, vop30, turn_pt = svsb->turn_pt;
@@ -943,7 +689,7 @@ static void svs_get_bank_volts_v3(struct svs_platform *svsp)
svsb->volt[i] -= svsb->dvt_fixed;
}
-static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
+void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
u32 i, j, *freq_pct, freq_pct74 = 0, freq_pct30 = 0;
@@ -1026,7 +772,7 @@ static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp)
svs_writel_relaxed(svsp, freq_pct30, FREQPCT30);
}
-static void svs_get_bank_volts_v2(struct svs_platform *svsp)
+void svs_get_bank_volts_v2(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
u32 temp, i;
@@ -1060,7 +806,7 @@ static void svs_get_bank_volts_v2(struct svs_platform *svsp)
svsb->volt[i] += svsb->volt_od;
}
-static void svs_set_bank_freq_pct_v2(struct svs_platform *svsp)
+void svs_set_bank_freq_pct_v2(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
u32 freqpct74_val, freqpct30_val;
@@ -1701,7 +1447,7 @@ static int svs_bank_resource_setup(struct svs_platform *svsp)
return 0;
}
-static int svs_thermal_efuse_get_data(struct svs_platform *svsp)
+int svs_thermal_efuse_get_data(struct svs_platform *svsp)
{
struct nvmem_cell *cell;
@@ -1726,262 +1472,6 @@ static int svs_thermal_efuse_get_data(struct svs_platform *svsp)
return 0;
}
-static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
-{
- struct svs_bank *svsb;
- u32 idx, i, vmin, golden_temp;
- int ret;
-
- for (i = 0; i < svsp->efuse_max; i++)
- if (svsp->efuse[i])
- dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
- i, svsp->efuse[i]);
-
- if (!svsp->efuse[9]) {
- dev_notice(svsp->dev, "svs_efuse[9] = 0x0?\n");
- return false;
- }
-
- /* Svs efuse parsing */
- vmin = (svsp->efuse[19] >> 4) & GENMASK(1, 0);
-
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
-
- if (vmin == 0x1)
- svsb->vmin = 0x1e;
-
- if (svsb->type == SVSB_LOW) {
- svsb->mtdes = svsp->efuse[10] & GENMASK(7, 0);
- svsb->bdes = (svsp->efuse[10] >> 16) & GENMASK(7, 0);
- svsb->mdes = (svsp->efuse[10] >> 24) & GENMASK(7, 0);
- svsb->dcbdet = (svsp->efuse[17]) & GENMASK(7, 0);
- svsb->dcmdet = (svsp->efuse[17] >> 8) & GENMASK(7, 0);
- } else if (svsb->type == SVSB_HIGH) {
- svsb->mtdes = svsp->efuse[9] & GENMASK(7, 0);
- svsb->bdes = (svsp->efuse[9] >> 16) & GENMASK(7, 0);
- svsb->mdes = (svsp->efuse[9] >> 24) & GENMASK(7, 0);
- svsb->dcbdet = (svsp->efuse[17] >> 16) & GENMASK(7, 0);
- svsb->dcmdet = (svsp->efuse[17] >> 24) & GENMASK(7, 0);
- }
-
- svsb->vmax += svsb->dvt_fixed;
- }
-
- ret = svs_thermal_efuse_get_data(svsp);
- if (ret)
- return false;
-
- for (i = 0; i < svsp->tefuse_max; i++)
- if (svsp->tefuse[i] != 0)
- break;
-
- if (i == svsp->tefuse_max)
- golden_temp = 50; /* All thermal efuse data are 0 */
- else
- golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
-
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
- svsb->mts = 500;
- svsb->bts = (((500 * golden_temp + 250460) / 1000) - 25) * 4;
- }
-
- return true;
-}
-
-static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
-{
- struct svs_bank *svsb;
- int format[6], x_roomt[6], o_vtsmcu[5], o_vtsabb, tb_roomt = 0;
- int adc_ge_t, adc_oe_t, ge, oe, gain, degc_cali, adc_cali_en_t;
- int o_slope, o_slope_sign, ts_id;
- u32 idx, i, ft_pgm, mts, temp0, temp1, temp2;
- int ret;
-
- for (i = 0; i < svsp->efuse_max; i++)
- if (svsp->efuse[i])
- dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
- i, svsp->efuse[i]);
-
- if (!svsp->efuse[2]) {
- dev_notice(svsp->dev, "svs_efuse[2] = 0x0?\n");
- return false;
- }
-
- /* Svs efuse parsing */
- ft_pgm = (svsp->efuse[0] >> 4) & GENMASK(3, 0);
-
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
-
- if (ft_pgm <= 1)
- svsb->volt_flags |= SVSB_INIT01_VOLT_IGNORE;
-
- switch (svsb->sw_id) {
- case SVSB_CPU_LITTLE:
- svsb->bdes = svsp->efuse[16] & GENMASK(7, 0);
- svsb->mdes = (svsp->efuse[16] >> 8) & GENMASK(7, 0);
- svsb->dcbdet = (svsp->efuse[16] >> 16) & GENMASK(7, 0);
- svsb->dcmdet = (svsp->efuse[16] >> 24) & GENMASK(7, 0);
- svsb->mtdes = (svsp->efuse[17] >> 16) & GENMASK(7, 0);
-
- if (ft_pgm <= 3)
- svsb->volt_od += 10;
- else
- svsb->volt_od += 2;
- break;
- case SVSB_CPU_BIG:
- svsb->bdes = svsp->efuse[18] & GENMASK(7, 0);
- svsb->mdes = (svsp->efuse[18] >> 8) & GENMASK(7, 0);
- svsb->dcbdet = (svsp->efuse[18] >> 16) & GENMASK(7, 0);
- svsb->dcmdet = (svsp->efuse[18] >> 24) & GENMASK(7, 0);
- svsb->mtdes = svsp->efuse[17] & GENMASK(7, 0);
-
- if (ft_pgm <= 3)
- svsb->volt_od += 15;
- else
- svsb->volt_od += 12;
- break;
- case SVSB_CCI:
- svsb->bdes = svsp->efuse[4] & GENMASK(7, 0);
- svsb->mdes = (svsp->efuse[4] >> 8) & GENMASK(7, 0);
- svsb->dcbdet = (svsp->efuse[4] >> 16) & GENMASK(7, 0);
- svsb->dcmdet = (svsp->efuse[4] >> 24) & GENMASK(7, 0);
- svsb->mtdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0);
-
- if (ft_pgm <= 3)
- svsb->volt_od += 10;
- else
- svsb->volt_od += 2;
- break;
- case SVSB_GPU:
- svsb->bdes = svsp->efuse[6] & GENMASK(7, 0);
- svsb->mdes = (svsp->efuse[6] >> 8) & GENMASK(7, 0);
- svsb->dcbdet = (svsp->efuse[6] >> 16) & GENMASK(7, 0);
- svsb->dcmdet = (svsp->efuse[6] >> 24) & GENMASK(7, 0);
- svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0);
-
- if (ft_pgm >= 2) {
- svsb->freq_base = 800000000; /* 800MHz */
- svsb->dvt_fixed = 2;
- }
- break;
- default:
- dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
- return false;
- }
- }
-
- ret = svs_thermal_efuse_get_data(svsp);
- if (ret)
- return false;
-
- /* Thermal efuse parsing */
- adc_ge_t = (svsp->tefuse[1] >> 22) & GENMASK(9, 0);
- adc_oe_t = (svsp->tefuse[1] >> 12) & GENMASK(9, 0);
-
- o_vtsmcu[0] = (svsp->tefuse[0] >> 17) & GENMASK(8, 0);
- o_vtsmcu[1] = (svsp->tefuse[0] >> 8) & GENMASK(8, 0);
- o_vtsmcu[2] = svsp->tefuse[1] & GENMASK(8, 0);
- o_vtsmcu[3] = (svsp->tefuse[2] >> 23) & GENMASK(8, 0);
- o_vtsmcu[4] = (svsp->tefuse[2] >> 5) & GENMASK(8, 0);
- o_vtsabb = (svsp->tefuse[2] >> 14) & GENMASK(8, 0);
-
- degc_cali = (svsp->tefuse[0] >> 1) & GENMASK(5, 0);
- adc_cali_en_t = svsp->tefuse[0] & BIT(0);
- o_slope_sign = (svsp->tefuse[0] >> 7) & BIT(0);
-
- ts_id = (svsp->tefuse[1] >> 9) & BIT(0);
- o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
-
- if (adc_cali_en_t == 1) {
- if (!ts_id)
- o_slope = 0;
-
- if (adc_ge_t < 265 || adc_ge_t > 758 ||
- adc_oe_t < 265 || adc_oe_t > 758 ||
- o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
- o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
- o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
- o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
- o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
- o_vtsabb < -8 || o_vtsabb > 484 ||
- degc_cali < 1 || degc_cali > 63) {
- dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
- goto remove_mt8183_svsb_mon_mode;
- }
- } else {
- dev_err(svsp->dev, "no thermal efuse, no mon mode\n");
- goto remove_mt8183_svsb_mon_mode;
- }
-
- ge = ((adc_ge_t - 512) * 10000) / 4096;
- oe = (adc_oe_t - 512);
- gain = (10000 + ge);
-
- format[0] = (o_vtsmcu[0] + 3350 - oe);
- format[1] = (o_vtsmcu[1] + 3350 - oe);
- format[2] = (o_vtsmcu[2] + 3350 - oe);
- format[3] = (o_vtsmcu[3] + 3350 - oe);
- format[4] = (o_vtsmcu[4] + 3350 - oe);
- format[5] = (o_vtsabb + 3350 - oe);
-
- for (i = 0; i < 6; i++)
- x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / gain;
-
- temp0 = (10000 * 100000 / gain) * 15 / 18;
-
- if (!o_slope_sign)
- mts = (temp0 * 10) / (1534 + o_slope * 10);
- else
- mts = (temp0 * 10) / (1534 - o_slope * 10);
-
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
- svsb->mts = mts;
-
- switch (svsb->sw_id) {
- case SVSB_CPU_LITTLE:
- tb_roomt = x_roomt[3];
- break;
- case SVSB_CPU_BIG:
- tb_roomt = x_roomt[4];
- break;
- case SVSB_CCI:
- tb_roomt = x_roomt[3];
- break;
- case SVSB_GPU:
- tb_roomt = x_roomt[1];
- break;
- default:
- dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
- goto remove_mt8183_svsb_mon_mode;
- }
-
- temp0 = (degc_cali * 10 / 2);
- temp1 = ((10000 * 100000 / 4096 / gain) *
- oe + tb_roomt * 10) * 15 / 18;
-
- if (!o_slope_sign)
- temp2 = temp1 * 100 / (1534 + o_slope * 10);
- else
- temp2 = temp1 * 100 / (1534 - o_slope * 10);
-
- svsb->bts = (temp0 + temp2 - 250) * 4 / 10;
- }
-
- return true;
-
-remove_mt8183_svsb_mon_mode:
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
- svsb->mode_support &= ~SVSB_MODE_MON;
- }
-
- return true;
-}
-
static bool svs_is_efuse_data_correct(struct svs_platform *svsp)
{
struct nvmem_cell *cell;
@@ -2008,7 +1498,7 @@ static bool svs_is_efuse_data_correct(struct svs_platform *svsp)
return true;
}
-static struct device *svs_get_subsys_device(struct svs_platform *svsp,
+struct device *svs_get_subsys_device(struct svs_platform *svsp,
const char *node_name)
{
struct platform_device *pdev;
@@ -2032,7 +1522,7 @@ static struct device *svs_get_subsys_device(struct svs_platform *svsp,
return &pdev->dev;
}
-static struct device *svs_add_device_link(struct svs_platform *svsp,
+struct device *svs_add_device_link(struct svs_platform *svsp,
const char *node_name)
{
struct device *dev;
@@ -2060,237 +1550,6 @@ static struct device *svs_add_device_link(struct svs_platform *svsp,
return dev;
}
-static int svs_mt8192_platform_probe(struct svs_platform *svsp)
-{
- struct device *dev;
- struct svs_bank *svsb;
- u32 idx;
-
- svsp->rst = devm_reset_control_get_optional(svsp->dev, "svs_rst");
- if (IS_ERR(svsp->rst))
- return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst),
- "cannot get svs reset control\n");
-
- dev = svs_add_device_link(svsp, "lvts");
- if (IS_ERR(dev))
- return dev_err_probe(svsp->dev, PTR_ERR(dev),
- "failed to get lvts device\n");
-
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
-
- if (svsb->type == SVSB_HIGH)
- svsb->opp_dev = svs_add_device_link(svsp, "mali");
- else if (svsb->type == SVSB_LOW)
- svsb->opp_dev = svs_get_subsys_device(svsp, "mali");
-
- if (IS_ERR(svsb->opp_dev))
- return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
- "failed to get OPP device for bank %d\n",
- idx);
- }
-
- return 0;
-}
-
-static int svs_mt8183_platform_probe(struct svs_platform *svsp)
-{
- struct device *dev;
- struct svs_bank *svsb;
- u32 idx;
-
- dev = svs_add_device_link(svsp, "thermal");
- if (IS_ERR(dev))
- return dev_err_probe(svsp->dev, PTR_ERR(dev),
- "failed to get thermal device\n");
-
- for (idx = 0; idx < svsp->bank_max; idx++) {
- svsb = &svsp->banks[idx];
-
- switch (svsb->sw_id) {
- case SVSB_CPU_LITTLE:
- case SVSB_CPU_BIG:
- svsb->opp_dev = get_cpu_device(svsb->cpu_id);
- break;
- case SVSB_CCI:
- svsb->opp_dev = svs_add_device_link(svsp, "cci");
- break;
- case SVSB_GPU:
- svsb->opp_dev = svs_add_device_link(svsp, "gpu");
- break;
- default:
- dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id);
- return -EINVAL;
- }
-
- if (IS_ERR(svsb->opp_dev))
- return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev),
- "failed to get OPP device for bank %d\n",
- idx);
- }
-
- return 0;
-}
-
-static struct svs_bank svs_mt8192_banks[] = {
- {
- .sw_id = SVSB_GPU,
- .type = SVSB_LOW,
- .set_freq_pct = svs_set_bank_freq_pct_v3,
- .get_volts = svs_get_bank_volts_v3,
- .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
- .mode_support = SVSB_MODE_INIT02,
- .opp_count = MAX_OPP_ENTRIES,
- .freq_base = 688000000,
- .turn_freq_base = 688000000,
- .volt_step = 6250,
- .volt_base = 400000,
- .vmax = 0x60,
- .vmin = 0x1a,
- .age_config = 0x555555,
- .dc_config = 0x1,
- .dvt_fixed = 0x1,
- .vco = 0x18,
- .chk_shift = 0x87,
- .core_sel = 0x0fff0100,
- .int_st = BIT(0),
- .ctl0 = 0x00540003,
- },
- {
- .sw_id = SVSB_GPU,
- .type = SVSB_HIGH,
- .set_freq_pct = svs_set_bank_freq_pct_v3,
- .get_volts = svs_get_bank_volts_v3,
- .tzone_name = "gpu1",
- .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
- SVSB_MON_VOLT_IGNORE,
- .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON,
- .opp_count = MAX_OPP_ENTRIES,
- .freq_base = 902000000,
- .turn_freq_base = 688000000,
- .volt_step = 6250,
- .volt_base = 400000,
- .vmax = 0x60,
- .vmin = 0x1a,
- .age_config = 0x555555,
- .dc_config = 0x1,
- .dvt_fixed = 0x6,
- .vco = 0x18,
- .chk_shift = 0x87,
- .core_sel = 0x0fff0101,
- .int_st = BIT(1),
- .ctl0 = 0x00540003,
- .tzone_htemp = 85000,
- .tzone_htemp_voffset = 0,
- .tzone_ltemp = 25000,
- .tzone_ltemp_voffset = 7,
- },
-};
-
-static struct svs_bank svs_mt8183_banks[] = {
- {
- .sw_id = SVSB_CPU_LITTLE,
- .set_freq_pct = svs_set_bank_freq_pct_v2,
- .get_volts = svs_get_bank_volts_v2,
- .cpu_id = 0,
- .buck_name = "proc",
- .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
- .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
- .opp_count = MAX_OPP_ENTRIES,
- .freq_base = 1989000000,
- .vboot = 0x30,
- .volt_step = 6250,
- .volt_base = 500000,
- .vmax = 0x64,
- .vmin = 0x18,
- .age_config = 0x555555,
- .dc_config = 0x555555,
- .dvt_fixed = 0x7,
- .vco = 0x10,
- .chk_shift = 0x77,
- .core_sel = 0x8fff0000,
- .int_st = BIT(0),
- .ctl0 = 0x00010001,
- },
- {
- .sw_id = SVSB_CPU_BIG,
- .set_freq_pct = svs_set_bank_freq_pct_v2,
- .get_volts = svs_get_bank_volts_v2,
- .cpu_id = 4,
- .buck_name = "proc",
- .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
- .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
- .opp_count = MAX_OPP_ENTRIES,
- .freq_base = 1989000000,
- .vboot = 0x30,
- .volt_step = 6250,
- .volt_base = 500000,
- .vmax = 0x58,
- .vmin = 0x10,
- .age_config = 0x555555,
- .dc_config = 0x555555,
- .dvt_fixed = 0x7,
- .vco = 0x10,
- .chk_shift = 0x77,
- .core_sel = 0x8fff0001,
- .int_st = BIT(1),
- .ctl0 = 0x00000001,
- },
- {
- .sw_id = SVSB_CCI,
- .set_freq_pct = svs_set_bank_freq_pct_v2,
- .get_volts = svs_get_bank_volts_v2,
- .buck_name = "proc",
- .volt_flags = SVSB_INIT01_VOLT_INC_ONLY,
- .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02,
- .opp_count = MAX_OPP_ENTRIES,
- .freq_base = 1196000000,
- .vboot = 0x30,
- .volt_step = 6250,
- .volt_base = 500000,
- .vmax = 0x64,
- .vmin = 0x18,
- .age_config = 0x555555,
- .dc_config = 0x555555,
- .dvt_fixed = 0x7,
- .vco = 0x10,
- .chk_shift = 0x77,
- .core_sel = 0x8fff0002,
- .int_st = BIT(2),
- .ctl0 = 0x00100003,
- },
- {
- .sw_id = SVSB_GPU,
- .set_freq_pct = svs_set_bank_freq_pct_v2,
- .get_volts = svs_get_bank_volts_v2,
- .buck_name = "mali",
- .tzone_name = "tzts2",
- .volt_flags = SVSB_INIT01_PD_REQ |
- SVSB_INIT01_VOLT_INC_ONLY,
- .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02 |
- SVSB_MODE_MON,
- .opp_count = MAX_OPP_ENTRIES,
- .freq_base = 900000000,
- .vboot = 0x30,
- .volt_step = 6250,
- .volt_base = 500000,
- .vmax = 0x40,
- .vmin = 0x14,
- .age_config = 0x555555,
- .dc_config = 0x555555,
- .dvt_fixed = 0x3,
- .vco = 0x10,
- .chk_shift = 0x77,
- .core_sel = 0x8fff0003,
- .int_st = BIT(3),
- .ctl0 = 0x00050001,
- .tzone_htemp = 85000,
- .tzone_htemp_voffset = 0,
- .tzone_ltemp = 25000,
- .tzone_ltemp_voffset = 3,
- },
-};
-
static const struct svs_platform_data svs_mt8192_platform_data = {
.name = "mt8192-svs",
.banks = svs_mt8192_banks,
diff --git a/drivers/soc/mediatek/mtk-svs.h b/drivers/soc/mediatek/mtk-svs.h
new file mode 100644
index 000000000000..dca414181066
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-svs.h
@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __DRV_SVS_MTK_H
+#define __DRV_SVS_MTK_H
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/reset.h>
+
+/* svs bank 1-line software id */
+#define SVSB_CPU_LITTLE BIT(0)
+#define SVSB_CPU_BIG BIT(1)
+#define SVSB_CCI BIT(2)
+#define SVSB_GPU BIT(3)
+
+/* svs bank 2-line type */
+#define SVSB_LOW BIT(8)
+#define SVSB_HIGH BIT(9)
+
+/* svs bank mode support */
+#define SVSB_MODE_ALL_DISABLE 0
+#define SVSB_MODE_INIT01 BIT(1)
+#define SVSB_MODE_INIT02 BIT(2)
+#define SVSB_MODE_MON BIT(3)
+
+/* svs bank volt flags */
+#define SVSB_INIT01_PD_REQ BIT(0)
+#define SVSB_INIT01_VOLT_IGNORE BIT(1)
+#define SVSB_INIT01_VOLT_INC_ONLY BIT(2)
+#define SVSB_MON_VOLT_IGNORE BIT(16)
+#define SVSB_REMOVE_DVTFIXED_VOLT BIT(24)
+
+/**
+ * enum svsb_phase - svs bank phase enumeration
+ * @SVSB_PHASE_ERROR: svs bank encounters unexpected condition
+ * @SVSB_PHASE_INIT01: svs bank basic init for data calibration
+ * @SVSB_PHASE_INIT02: svs bank can provide voltages to opp table
+ * @SVSB_PHASE_MON: svs bank can provide voltages with thermal effect
+ * @SVSB_PHASE_MAX: total number of svs bank phase (debug purpose)
+ *
+ * Each svs bank has its own independent phase and we enable each svs bank by
+ * running their phase orderly. However, when svs bank encounters unexpected
+ * condition, it will fire an irq (PHASE_ERROR) to inform svs software.
+ *
+ * svs bank general phase-enabled order:
+ * SVSB_PHASE_INIT01 -> SVSB_PHASE_INIT02 -> SVSB_PHASE_MON
+ */
+enum svsb_phase {
+ SVSB_PHASE_ERROR = 0,
+ SVSB_PHASE_INIT01,
+ SVSB_PHASE_INIT02,
+ SVSB_PHASE_MON,
+ SVSB_PHASE_MAX,
+};
+
+enum svs_reg_index {
+ DESCHAR = 0,
+ TEMPCHAR,
+ DETCHAR,
+ AGECHAR,
+ DCCONFIG,
+ AGECONFIG,
+ FREQPCT30,
+ FREQPCT74,
+ LIMITVALS,
+ VBOOT,
+ DETWINDOW,
+ CONFIG,
+ TSCALCS,
+ RUNCONFIG,
+ SVSEN,
+ INIT2VALS,
+ DCVALUES,
+ AGEVALUES,
+ VOP30,
+ VOP74,
+ TEMP,
+ INTSTS,
+ INTSTSRAW,
+ INTEN,
+ CHKINT,
+ CHKSHIFT,
+ STATUS,
+ VDESIGN30,
+ VDESIGN74,
+ DVT30,
+ DVT74,
+ AGECOUNT,
+ SMSTATE0,
+ SMSTATE1,
+ CTL0,
+ DESDETSEC,
+ TEMPAGESEC,
+ CTRLSPARE0,
+ CTRLSPARE1,
+ CTRLSPARE2,
+ CTRLSPARE3,
+ CORESEL,
+ THERMINTST,
+ INTST,
+ THSTAGE0ST,
+ THSTAGE1ST,
+ THSTAGE2ST,
+ THAHBST0,
+ THAHBST1,
+ SPARE0,
+ SPARE1,
+ SPARE2,
+ SPARE3,
+ THSLPEVEB,
+ SVS_REG_MAX,
+};
+
+/**
+ * struct svs_platform - svs platform control
+ * @base: svs platform register base
+ * @dev: svs platform device
+ * @main_clk: main clock for svs bank
+ * @pbank: svs bank pointer needing to be protected by spin_lock section
+ * @banks: svs banks that svs platform supports
+ * @rst: svs platform reset control
+ * @efuse_max: total number of svs efuse
+ * @tefuse_max: total number of thermal efuse
+ * @regs: svs platform registers map
+ * @bank_max: total number of svs banks
+ * @efuse: svs efuse data received from NVMEM framework
+ * @tefuse: thermal efuse data received from NVMEM framework
+ */
+struct svs_platform {
+ void __iomem *base;
+ struct device *dev;
+ struct clk *main_clk;
+ struct svs_bank *pbank;
+ struct svs_bank *banks;
+ struct reset_control *rst;
+ size_t efuse_max;
+ size_t tefuse_max;
+ const u32 *regs;
+ u32 bank_max;
+ u32 *efuse;
+ u32 *tefuse;
+};
+
+#define MAX_OPP_ENTRIES 16
+
+/**
+ * struct svs_bank - svs bank representation
+ * @dev: bank device
+ * @opp_dev: device for opp table/buck control
+ * @init_completion: the timeout completion for bank init
+ * @buck: regulator used by opp_dev
+ * @tzd: thermal zone device for getting temperature
+ * @lock: mutex lock to protect voltage update process
+ * @set_freq_pct: function pointer to set bank frequency percent table
+ * @get_volts: function pointer to get bank voltages
+ * @name: bank name
+ * @buck_name: regulator name
+ * @tzone_name: thermal zone name
+ * @phase: bank current phase
+ * @volt_od: bank voltage overdrive
+ * @reg_data: bank register data in different phase for debug purpose
+ * @pm_runtime_enabled_count: bank pm runtime enabled count
+ * @mode_support: bank mode support.
+ * @freq_base: reference frequency for bank init
+ * @turn_freq_base: refenrece frequency for 2-line turn point
+ * @vboot: voltage request for bank init01 only
+ * @opp_dfreq: default opp frequency table
+ * @opp_dvolt: default opp voltage table
+ * @freq_pct: frequency percent table for bank init
+ * @volt: bank voltage table
+ * @volt_step: bank voltage step
+ * @volt_base: bank voltage base
+ * @volt_flags: bank voltage flags
+ * @vmax: bank voltage maximum
+ * @vmin: bank voltage minimum
+ * @age_config: bank age configuration
+ * @age_voffset_in: bank age voltage offset
+ * @dc_config: bank dc configuration
+ * @dc_voffset_in: bank dc voltage offset
+ * @dvt_fixed: bank dvt fixed value
+ * @vco: bank VCO value
+ * @chk_shift: bank chicken shift
+ * @core_sel: bank selection
+ * @opp_count: bank opp count
+ * @int_st: bank interrupt identification
+ * @sw_id: bank software identification
+ * @cpu_id: cpu core id for SVS CPU bank use only
+ * @ctl0: TS-x selection
+ * @temp: bank temperature
+ * @tzone_htemp: thermal zone high temperature threshold
+ * @tzone_htemp_voffset: thermal zone high temperature voltage offset
+ * @tzone_ltemp: thermal zone low temperature threshold
+ * @tzone_ltemp_voffset: thermal zone low temperature voltage offset
+ * @bts: svs efuse data
+ * @mts: svs efuse data
+ * @bdes: svs efuse data
+ * @mdes: svs efuse data
+ * @mtdes: svs efuse data
+ * @dcbdet: svs efuse data
+ * @dcmdet: svs efuse data
+ * @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank
+ * @type: bank type to represent it is 2-line (high/low) bank or 1-line bank
+ *
+ * Svs bank will generate suitalbe voltages by below general math equation
+ * and provide these voltages to opp voltage table.
+ *
+ * opp_volt[i] = (volt[i] * volt_step) + volt_base;
+ */
+struct svs_bank {
+ struct device *dev;
+ struct device *opp_dev;
+ struct completion init_completion;
+ struct regulator *buck;
+ struct thermal_zone_device *tzd;
+ struct mutex lock; /* lock to protect voltage update process */
+ void (*set_freq_pct)(struct svs_platform *svsp);
+ void (*get_volts)(struct svs_platform *svsp);
+ char *name;
+ char *buck_name;
+ char *tzone_name;
+ enum svsb_phase phase;
+ s32 volt_od;
+ u32 reg_data[SVSB_PHASE_MAX][SVS_REG_MAX];
+ u32 pm_runtime_enabled_count;
+ u32 mode_support;
+ u32 freq_base;
+ u32 turn_freq_base;
+ u32 vboot;
+ u32 opp_dfreq[MAX_OPP_ENTRIES];
+ u32 opp_dvolt[MAX_OPP_ENTRIES];
+ u32 freq_pct[MAX_OPP_ENTRIES];
+ u32 volt[MAX_OPP_ENTRIES];
+ u32 volt_step;
+ u32 volt_base;
+ u32 volt_flags;
+ u32 vmax;
+ u32 vmin;
+ u32 age_config;
+ u32 age_voffset_in;
+ u32 dc_config;
+ u32 dc_voffset_in;
+ u32 dvt_fixed;
+ u32 vco;
+ u32 chk_shift;
+ u32 core_sel;
+ u32 opp_count;
+ u32 int_st;
+ u32 sw_id;
+ u32 cpu_id;
+ u32 ctl0;
+ u32 temp;
+ u32 tzone_htemp;
+ u32 tzone_htemp_voffset;
+ u32 tzone_ltemp;
+ u32 tzone_ltemp_voffset;
+ u32 bts;
+ u32 mts;
+ u32 bdes;
+ u32 mdes;
+ u32 mtdes;
+ u32 dcbdet;
+ u32 dcmdet;
+ u32 turn_pt;
+ u32 type;
+};
+
+struct device *svs_add_device_link(struct svs_platform *svsp,
+ const char *node_name);
+struct device *svs_get_subsys_device(struct svs_platform *svsp,
+ const char *node_name);
+int svs_thermal_efuse_get_data(struct svs_platform *svsp);
+
+void svs_get_bank_volts_v2(struct svs_platform *svsp);
+void svs_set_bank_freq_pct_v2(struct svs_platform *svsp);
+
+void svs_get_bank_volts_v3(struct svs_platform *svsp);
+void svs_set_bank_freq_pct_v3(struct svs_platform *svsp);
+#endif
--
2.37.3
Powered by blists - more mailing lists