[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220928230019.2140896-2-dmitry.torokhov@gmail.com>
Date: Wed, 28 Sep 2022 16:00:19 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>
Cc: Vladimir Zapolskiy <vz@...ia.com>, linux-mtd@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] mtd: rawnand: lpc32xx_slc: switch to using gpiod API
This switches the driver from legacy gpio API to a newer gpiod API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
drivers/mtd/nand/raw/lpc32xx_slc.c | 33 +++++++++++++++---------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index 6b7269cfb7d8..4702577f74e5 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -23,9 +23,8 @@
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/mtd/lpc32xx_slc.h>
#define LPC32XX_MODNAME "lpc32xx-nand"
@@ -208,7 +207,6 @@ struct lpc32xx_nand_cfg_slc {
uint32_t rwidth;
uint32_t rhold;
uint32_t rsetup;
- int wp_gpio;
struct mtd_partition *parts;
unsigned num_parts;
};
@@ -217,6 +215,7 @@ struct lpc32xx_nand_host {
struct nand_chip nand_chip;
struct lpc32xx_slc_platform_data *pdata;
struct clk *clk;
+ struct gpio_desc *wp_gpio;
void __iomem *io_base;
struct lpc32xx_nand_cfg_slc *ncfg;
@@ -309,8 +308,8 @@ static int lpc32xx_nand_device_ready(struct nand_chip *chip)
*/
static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
{
- if (gpio_is_valid(host->ncfg->wp_gpio))
- gpio_set_value(host->ncfg->wp_gpio, 0);
+ if (host->wp_gpio)
+ gpiod_set_value_cansleep(host->wp_gpio, 1);
}
/*
@@ -318,8 +317,8 @@ static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
*/
static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
{
- if (gpio_is_valid(host->ncfg->wp_gpio))
- gpio_set_value(host->ncfg->wp_gpio, 1);
+ if (host->wp_gpio)
+ gpiod_set_value_cansleep(host->wp_gpio, 0);
}
/*
@@ -764,8 +763,6 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
return NULL;
}
- ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
-
return ncfg;
}
@@ -852,14 +849,18 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
"Missing or bad NAND config from device tree\n");
return -ENOENT;
}
- if (host->ncfg->wp_gpio == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev,
- host->ncfg->wp_gpio, "NAND WP")) {
- dev_err(&pdev->dev, "GPIO not available\n");
- return -EBUSY;
+
+ /* Start with WP disabled, if available */
+ host->wp_gpio = gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW);
+ res = PTR_ERR_OR_ZERO(host->wp_gpio);
+ if (res) {
+ if (res != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "WP GPIO is not available: %d\n",
+ res);
+ return res;
}
- lpc32xx_wp_disable(host);
+
+ gpiod_set_consumer_name(host->wp_gpio, "NAND WP");
host->pdata = dev_get_platdata(&pdev->dev);
--
2.38.0.rc1.362.ged0d419d3c-goog
Powered by blists - more mailing lists