Message-ID: <20220928081546.31950-1-yongqiang.niu@mediatek.com>
Date:   Wed, 28 Sep 2022 16:15:46 +0800
From:   Yongqiang Niu <yongqiang.niu@...iatek.com>
To:     CK Hu <ck.hu@...iatek.com>, Chun-Kuang Hu <chunkuang.hu@...nel.org>
CC:     Jassi Brar <jassisinghbrar@...il.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <Project_Global_Chrome_Upstream_Group@...iatek.com>,
        Hsin-Yi Wang <hsinyi@...omium.org>,
        Yongqiang Niu <yongqiang.niu@...iatek.com>
Subject: [PATCH v6] mailbox: mtk-cmdq: fix gce timeout issue

1. enable gce ddr enable(gce reigster offset 0x48, bit 16 to 18) when gce work,
and disable gce ddr enable when gce work job done
2. add cmdq ddr enable/disable api, and control gce ddr enable/disable
to make sure it could protect when cmdq is multiple used by display and mdp

this is only for some SOC which has flag "gce_ddr_en".
for this kind of gce, there is a handshake flow between gce and ddr
hardware,
if not set ddr enable flag of gce, ddr will fall into idle mode,
then gce instructions will not process done.
we need set this flag of gce to tell ddr when gce is idle or busy
controlled by software flow.

ddr problem is a special case.
when test suspend/resume case, gce sometimes will pull ddr, and ddr can
not go to suspend.
if we set gce register 0x48 to 0x7, will fix this gce pull ddr issue,
as you have referred [1] and [2] (8192 and 8195)
but for mt8186, the gce is more special, except setting of [1] and [2],
we need add more setting set gce register 0x48 to (0x7 << 16 | 0x7)
when gce working to make sure gce could process all instructions ok.
this case just need normal bootup, if we not set this, display cmdq
task will timeout, and chrome homescreen will always black screen.

and with this patch, we have done these test on mt8186:
1.suspend/resume
2.boot up to home screen
3.playback video with youtube.

suspend issue is special gce hardware issue, gce client  driver
command already process done, but gce still pull ddr.

Signed-off-by: Yongqiang Niu <yongqiang.niu@...iatek.com>

---
change since v5:
1. adjust gce software control and ddr enable setting reviewed in v5
2. correct GCE_CTRL_BY_SW definitaion type error
---

---
 drivers/mailbox/mtk-cmdq-mailbox.c | 42 +++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 9465f9081515..ce3c595353d7 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -38,6 +38,8 @@
 #define CMDQ_THR_PRIORITY		0x40
 
 #define GCE_GCTL_VALUE			0x48
+#define GCE_CTRL_BY_SW				GENMASK(2, 0)
+#define GCE_DDR_EN				GENMASK(18, 16)
 
 #define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
 #define CMDQ_THR_ENABLED		0x1
@@ -80,6 +82,7 @@ struct cmdq {
 	bool			suspended;
 	u8			shift_pa;
 	bool			control_by_sw;
+	bool			sw_ddr_en;
 	u32			gce_num;
 };
 
@@ -87,9 +90,25 @@ struct gce_plat {
 	u32 thread_nr;
 	u8 shift;
 	bool control_by_sw;
+	bool sw_ddr_en;
 	u32 gce_num;
 };
 
+static void cmdq_sw_ddr_enable(struct cmdq *cmdq, bool enable)
+{
+	if (!cmdq->sw_ddr_en)
+		return;
+
+	WARN_ON(clk_bulk_enable(cmdq->gce_num, cmdq->clocks));
+
+	if (enable)
+		writel(GCE_DDR_EN | GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);
+	else
+		writel(GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);
+
+	clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
+}
+
 u8 cmdq_get_shift_pa(struct mbox_chan *chan)
 {
 	struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox);
@@ -129,7 +148,11 @@ static void cmdq_init(struct cmdq *cmdq)
 
 	WARN_ON(clk_bulk_enable(cmdq->gce_num, cmdq->clocks));
 	if (cmdq->control_by_sw)
-		writel(0x7, cmdq->base + GCE_GCTL_VALUE);
+		writel(GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);
+
+	if (cmdq->sw_ddr_en)
+		writel(GCE_DDR_EN | GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);
+
 	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
 	for (i = 0; i <= CMDQ_MAX_EVENT; i++)
 		writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
@@ -311,6 +334,8 @@ static int cmdq_suspend(struct device *dev)
 	if (task_running)
 		dev_warn(dev, "exist running task(s) in suspend\n");
 
+	cmdq_sw_ddr_enable(cmdq, false);
+
 	clk_bulk_unprepare(cmdq->gce_num, cmdq->clocks);
 
 	return 0;
@@ -322,6 +347,9 @@ static int cmdq_resume(struct device *dev)
 
 	WARN_ON(clk_bulk_prepare(cmdq->gce_num, cmdq->clocks));
 	cmdq->suspended = false;
+
+	cmdq_sw_ddr_enable(cmdq, true);
+
 	return 0;
 }
 
@@ -329,6 +357,8 @@ static int cmdq_remove(struct platform_device *pdev)
 {
 	struct cmdq *cmdq = platform_get_drvdata(pdev);
 
+	cmdq_sw_ddr_enable(cmdq, false);
+
 	clk_bulk_unprepare(cmdq->gce_num, cmdq->clocks);
 	return 0;
 }
@@ -543,6 +573,7 @@ static int cmdq_probe(struct platform_device *pdev)
 	cmdq->thread_nr = plat_data->thread_nr;
 	cmdq->shift_pa = plat_data->shift;
 	cmdq->control_by_sw = plat_data->control_by_sw;
+	cmdq->sw_ddr_en = plat_data->sw_ddr_en;
 	cmdq->gce_num = plat_data->gce_num;
 	cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
 	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
@@ -660,9 +691,18 @@ static const struct gce_plat gce_plat_v6 = {
 	.gce_num = 2
 };
 
+static const struct gce_plat gce_plat_v7 = {
+	.thread_nr = 24,
+	.shift = 3,
+	.control_by_sw = true,
+	.sw_ddr_en = true,
+	.gce_num = 1
+};
+
 static const struct of_device_id cmdq_of_ids[] = {
 	{.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2},
 	{.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3},
+	{.compatible = "mediatek,mt8186-gce", .data = (void *)&gce_plat_v7},
 	{.compatible = "mediatek,mt6779-gce", .data = (void *)&gce_plat_v4},
 	{.compatible = "mediatek,mt8192-gce", .data = (void *)&gce_plat_v5},
 	{.compatible = "mediatek,mt8195-gce", .data = (void *)&gce_plat_v6},
-- 
2.25.1

Powered by blists - more mailing lists