linux-kernel - [PATCH v1 6/7] arm: dts: qcom: mdm9615: remove invalid interrupt-names from pl18x mmc nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220928-mdm9615-dt-schema-fixes-v1-6-b6e63a7df1e8@linaro.org>
Date:   Wed, 28 Sep 2022 09:14:56 +0000
From:   Neil Armstrong <neil.armstrong@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>
Cc:     devicetree@...r.kernel.org,
        Neil Armstrong <neil.armstrong@...aro.org>,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: [PATCH v1 6/7] arm: dts: qcom: mdm9615: remove invalid interrupt-names from
 pl18x mmc nodes

This solves the 'interrupt-names' was unexpected dtbs check error.

Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 935f7b222200..d8723bd3fedb 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -325,7 +325,6 @@ sdcc1: mmc@...80000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -345,7 +344,6 @@ sdcc2: mmc@...40000 {
 				status = "disabled";
 				reg = <0x12140000 0x2000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;

-- 
b4 0.10.0