| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 30 Sep 2022 19:27:32 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: rafael@...nel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, rui.zhang@...el.com,
Raju Rangoju <rajur@...lsio.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Peter Kaestle <peter@...e.net>,
Hans de Goede <hdegoede@...hat.com>,
Mark Gross <markgross@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Amit Kucheria <amitk@...nel.org>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Broadcom Kernel Team <bcm-kernel-feedback-list@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Support Opensource <support.opensource@...semi.com>,
Lukasz Luba <lukasz.luba@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Thara Gopinath <thara.gopinath@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Niklas Söderlund <niklas.soderlund@...natech.se>,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Eduardo Valentin <edubezval@...il.com>,
Keerthy <j-keerthy@...com>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>,
Masami Hiramatsu <mhiramat@...nel.org>,
Antoine Tenart <atenart@...nel.org>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Dmitry Osipenko <digetx@...il.com>, netdev@...r.kernel.org,
platform-driver-x86@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-omap@...r.kernel.org
Subject: Re: [PATCH v7 03/29] thermal/core: Add a generic thermal_zone_set_trip()
function
On Wed, Sep 28, 2022 at 11:01 PM Daniel Lezcano
<daniel.lezcano@...aro.org> wrote:
>
> The thermal zone ops defines a set_trip callback where we can invoke
> the backend driver to set an interrupt for the next trip point
> temperature being crossed the way up or down, or setting the low level
> with the hysteresis.
>
> The ops is only called from the thermal sysfs code where the userspace
> has the ability to modify a trip point characteristic.
>
> With the effort of encapsulating the thermal framework core code,
> let's create a thermal_zone_set_trip() which is the writable side of
> the thermal_zone_get_trip() and put there all the ops encapsulation.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
> ---
> drivers/thermal/thermal_core.c | 47 +++++++++++++++++++++++++++++
> drivers/thermal/thermal_sysfs.c | 52 +++++++++++----------------------
> include/linux/thermal.h | 3 ++
> 3 files changed, 67 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index 16ef91dc102f..2675671781cd 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -1211,6 +1211,53 @@ int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
> }
> EXPORT_SYMBOL_GPL(thermal_zone_get_trip);
>
> +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id,
> + const struct thermal_trip *trip)
> +{
> + struct thermal_trip t;
> + int ret = -EINVAL;
> +
> + mutex_lock(&tz->lock);
> +
> + if (!tz->ops->set_trip_temp && !tz->ops->set_trip_hyst && !tz->trips)
> + goto out;
> +
> + ret = __thermal_zone_get_trip(tz, trip_id, &t);
> + if (ret)
> + goto out;
> +
> + if (t.type != trip->type) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + if (t.temperature != trip->temperature && tz->ops->set_trip_temp) {
> + ret = tz->ops->set_trip_temp(tz, trip_id, trip->temperature);
> + if (ret)
> + goto out;
> + }
> +
> + if (t.hysteresis != trip->hysteresis && tz->ops->set_trip_hyst) {
> + ret = tz->ops->set_trip_hyst(tz, trip_id, trip->hysteresis);
> + if (ret)
> + goto out;
> + }
> +
> + if (tz->trips && ((t.temperature != trip->temperature) ||
> + (t.hysteresis != trip->hysteresis)))
if (tz->trips && (t.temperature != trip->temperature || t.hysteresis
!= trip->hysteresis))
pretty please, and I don't think that it is necessary to break this line.
> + tz->trips[trip_id] = *trip;
> +out:
> + mutex_unlock(&tz->lock);
> +
> + if (!ret) {
> + thermal_notify_tz_trip_change(tz->id, trip_id, trip->type,
> + trip->temperature, trip->hysteresis);
> + thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED);
> + }
> +
> + return ret;
> +}
> +
> /**
> * thermal_zone_device_register_with_trips() - register a new thermal zone device
> * @type: the thermal zone device type
> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> index 6c45194aaabb..8d7b25ab67c2 100644
> --- a/drivers/thermal/thermal_sysfs.c
> +++ b/drivers/thermal/thermal_sysfs.c
> @@ -115,32 +115,19 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
> struct thermal_trip trip;
> int trip_id, ret;
>
> - if (!tz->ops->set_trip_temp && !tz->trips)
> - return -EPERM;
> -
> if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1)
> return -EINVAL;
>
> - if (kstrtoint(buf, 10, &trip.temperature))
> - return -EINVAL;
> -
> - if (tz->ops->set_trip_temp) {
> - ret = tz->ops->set_trip_temp(tz, trip_id, trip.temperature);
> - if (ret)
> - return ret;
> - }
> -
> - if (tz->trips)
> - tz->trips[trip_id].temperature = trip.temperature;
> -
> ret = thermal_zone_get_trip(tz, trip_id, &trip);
> if (ret)
> return ret;
>
> - thermal_notify_tz_trip_change(tz->id, trip_id, trip.type,
> - trip.temperature, trip.hysteresis);
> + if (kstrtoint(buf, 10, &trip.temperature))
> + return -EINVAL;
>
> - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
> + ret = thermal_zone_set_trip(tz, trip_id, &trip);
> + if (ret)
> + return ret;
>
> return count;
> }
> @@ -168,29 +155,24 @@ trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
> const char *buf, size_t count)
> {
> struct thermal_zone_device *tz = to_thermal_zone(dev);
> - int trip, ret;
> - int temperature;
> -
> - if (!tz->ops->set_trip_hyst)
> - return -EPERM;
> + struct thermal_trip trip;
> + int trip_id, ret;
>
> - if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
> + if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip_id) != 1)
> return -EINVAL;
>
> - if (kstrtoint(buf, 10, &temperature))
> - return -EINVAL;
> + ret = thermal_zone_get_trip(tz, trip_id, &trip);
> + if (ret)
> + return ret;
>
> - /*
> - * We are not doing any check on the 'temperature' value
> - * here. The driver implementing 'set_trip_hyst' has to
> - * take care of this.
> - */
> - ret = tz->ops->set_trip_hyst(tz, trip, temperature);
> + if (kstrtoint(buf, 10, &trip.hysteresis))
> + return -EINVAL;
>
> - if (!ret)
> - thermal_zone_set_trips(tz);
> + ret = thermal_zone_set_trip(tz, trip_id, &trip);
> + if (ret)
> + return ret;
>
> - return ret ? ret : count;
> + return count;
> }
>
> static ssize_t
> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> index feb8b61df746..66373f872237 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -338,6 +338,9 @@ static inline void devm_thermal_of_zone_unregister(struct device *dev,
> int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
> struct thermal_trip *trip);
>
> +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id,
> + const struct thermal_trip *trip);
> +
> int thermal_zone_get_num_trips(struct thermal_zone_device *tz);
>
> int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp);
> --
> 2.34.1
>
Powered by blists - more mailing lists