| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221001030656.29365-18-quic_molvera@quicinc.com>
Date: Fri, 30 Sep 2022 20:06:54 -0700
From: Melody Olvera <quic_molvera@...cinc.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Melody Olvera <quic_molvera@...cinc.com>
Subject: [PATCH 17/19] arm64: dts: qcom: qdru1000: Add I2C nodes for QUP
Add I2C nodes to the QUP along with pinconf for these nodes.
Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
---
arch/arm64/boot/dts/qcom/qdru1000.dtsi | 365 +++++++++++++++++++++++++
1 file changed, 365 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qdru1000.dtsi b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
index c105bc15995b..40d7cc4c1f3d 100644
--- a/arch/arm64/boot/dts/qcom/qdru1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
@@ -302,6 +302,132 @@ uart7: serial@...000 {
#size-cells = <0>;
status = "disabled";
};
+
+ i2c1: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x984000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ dmas = <&gpi_dma0 0 1 3 64 0>,
+ <&gpi_dma0 1 1 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x988000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ dmas = <&gpi_dma0 0 2 3 64 0>,
+ <&gpi_dma0 1 2 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x98c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ dmas = <&gpi_dma0 0 3 3 64 0>,
+ <&gpi_dma0 1 3 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x990000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ dmas = <&gpi_dma0 0 4 3 64 0>,
+ <&gpi_dma0 1 4 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x994000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ dmas = <&gpi_dma0 0 5 3 64 0>,
+ <&gpi_dma0 1 5 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x998000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+ <&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ dmas = <&gpi_dma0 0 6 3 64 0>,
+ <&gpi_dma0 1 6 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@...000 {
@@ -316,6 +442,153 @@ qupv3_id_1: geniqup@...000 {
ranges;
status = "disabled";
+
+ i2c9: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ dmas = <&gpi_dma1 0 1 3 64 0>,
+ <&gpi_dma1 1 1 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ dmas = <&gpi_dma1 0 2 3 64 0>,
+ <&gpi_dma1 1 2 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@...000 {
+ compatible = "qcom,i2c-geni";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ dmas = <&gpi_dma1 0 3 3 64 0>,
+ <&gpi_dma1 1 3 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa90000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ dmas = <&gpi_dma1 0 4 3 64 0>,
+ <&gpi_dma1 1 4 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c13: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa94000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ dmas = <&gpi_dma1 0 5 3 64 0>,
+ <&gpi_dma1 1 5 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c14: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa98000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_data_clk>;
+ dmas = <&gpi_dma1 0 6 3 64 0>,
+ <&gpi_dma1 1 6 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa9c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ interconnects =
+ <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+ <&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ dmas = <&gpi_dma1 0 7 3 64 0>,
+ <&gpi_dma1 1 7 3 64 0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
@@ -381,6 +654,98 @@ rx {
bias-disable;
};
};
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk {
+ pins = "gpio10", "gpio11";
+ function = "qup0_se1_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk {
+ pins = "gpio12", "gpio13";
+ function = "qup0_se2_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk {
+ pins = "gpio14", "gpio15";
+ function = "qup0_se3_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk {
+ pins = "gpio16", "gpio17";
+ function = "qup0_se4_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk {
+ pins = "gpio130", "gpio131";
+ function = "qup0_se5_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk {
+ pins = "gpio132", "gpio133";
+ function = "qup0_se6_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk {
+ pins = "gpio22", "gpio23";
+ function = "qup1_se1_l0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk {
+ pins = "gpio24", "gpio25";
+ function = "qup1_se2_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk {
+ pins = "gpio26", "gpio27";
+ function = "qup1_se3_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk {
+ pins = "gpio28", "gpio29";
+ function = "qup1_se4_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk {
+ pins = "gpio30", "gpio31";
+ function = "qup1_se5_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk {
+ pins = "gpio34", "gpio35";
+ function = "qup1_se6_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
+ qup_i2c15_data_clk: qup-i2c15-data-clk {
+ pins = "gpio40", "gpio41";
+ function = "qup1_se7_l0";
+ drive-strength = <2>;
+ bias-pulll-up;
+ };
+
};
pdc: interrupt-controller@...0000 {
--
2.37.3
Powered by blists - more mailing lists