| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221002092002.68880-1-krzysztof.kozlowski@linaro.org>
Date: Sun, 2 Oct 2022 11:20:02 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] ARM: dts: omap: correct indentation
Do not use spaces for indentation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 6 +--
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 6 +--
arch/arm/boot/dts/omap3-cm-t3517.dts | 12 ++---
arch/arm/boot/dts/omap3-gta04.dtsi | 6 +--
arch/arm/boot/dts/omap3-ldp.dts | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 38 +++++++-------
arch/arm/boot/dts/omap3-zoom3.dts | 44 ++++++++--------
arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 24 ++++-----
arch/arm/boot/dts/omap5-cm-t54.dts | 64 +++++++++++------------
9 files changed, 101 insertions(+), 101 deletions(-)
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index ce6c235f68ec..3046ec572632 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -8,9 +8,9 @@
/ {
vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
};
vdd33a: regulator-vdd33a {
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index e7534fe9c53c..bc8961f3690f 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -12,9 +12,9 @@
/ {
vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
};
vdd33a: regulator-vdd33a {
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 3b8349094baa..f25c0a84a190 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -11,12 +11,12 @@ / {
model = "CompuLab CM-T3517";
compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
- vmmc: regulator-vmmc {
- compatible = "regulator-fixed";
- regulator-name = "vmmc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
+ vmmc: regulator-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
wl12xx_vmmc2: wl12xx_vmmc2 {
compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 28a6a9345be5..330bca6f8199 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -332,7 +332,7 @@ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
- };
+ };
gps_pins: pinmux_gps_pins {
pinctrl-single,pins = <
@@ -853,8 +853,8 @@ &mcbsp4 { /* GSM voice PCM */
};
&hdqw1w {
- pinctrl-names = "default";
- pinctrl-0 = <&hdq_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
};
/* image signal processor within OMAP3 SoC */
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 36fc8805e0c1..85f33bbb566f 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -301,5 +301,5 @@ &usb_otg_hs {
&vaux1 {
/* Needed for ads7846 */
- regulator-name = "vcc";
+ regulator-name = "vcc";
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index dd7971556449..98a67581bdd2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -236,27 +236,27 @@ gpmc_pins: pinmux_gpmc_pins {
pinctrl-single,pins = <
/* address lines */
- OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
- OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
- OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
/* data lines, gpmc_d0..d7 not muxable according to TRM */
- OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
- OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
- OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
- OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
- OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
- OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
- OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
- OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
/*
* gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
* according to TRM. OneNAND seems to require PIN_INPUT on clock.
*/
- OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
- OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
- >;
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
};
i2c1_pins: pinmux_i2c1_pins {
@@ -738,12 +738,12 @@ tpa6130a2: tpa6130a2@60 {
si4713: si4713@63 {
compatible = "silabs,si4713";
- reg = <0x63>;
+ reg = <0x63>;
- interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
- reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
- vio-supply = <&vio>;
- vdd-supply = <&vaux1>;
+ interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+ reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+ vio-supply = <&vio>;
+ vdd-supply = <&vaux1>;
};
bq24150a: bq24150a@6b {
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 0482676d1830..ce58b1f208e8 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -23,9 +23,9 @@ memory@...00000 {
};
vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
};
vdd33a: regulator-vdd33a {
@@ -84,28 +84,28 @@ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
- OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
- OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
+ OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
- OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
@@ -205,22 +205,22 @@ wlcore: wlcore@2 {
};
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
};
&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
};
&uart4 {
- status = "disabled";
+ status = "disabled";
};
&usb_otg_hs {
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index 4d7eeb133dad..801b4f10350c 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -13,20 +13,20 @@ cpu_thermal: cpu_thermal {
polling-delay = <1000>; /* milliseconds */
/* sensor ID */
- thermal-sensors = <&bandgap 0>;
+ thermal-sensors = <&bandgap 0>;
cpu_trips: trips {
- cpu_alert0: cpu_alert {
- temperature = <100000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <125000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
+ cpu_alert0: cpu_alert {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <125000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
cpu_cooling_maps: cooling-maps {
map0 {
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a58..2d87b9fc230e 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -84,36 +84,36 @@ led1 {
};
lcd0: display {
- compatible = "startek,startek-kd050c", "panel-dpi";
- label = "lcd";
-
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pins>;
-
- enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
- panel-timing {
- clock-frequency = <33000000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <43>;
- vback-porch = <29>;
- vfront-porch = <13>;
- vsync-len = <3>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- port {
- lcd_in: endpoint {
- remote-endpoint = <&dpi_lcd_out>;
- };
- };
- };
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <43>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ };
+ };
+ };
hdmi0: connector0 {
compatible = "hdmi-connector";
@@ -644,8 +644,8 @@ &usbhsehci {
};
&usb3 {
- extcon = <&extcon_usb3>;
- vbus-supply = <&smps10_out1_reg>;
+ extcon = <&extcon_usb3>;
+ vbus-supply = <&smps10_out1_reg>;
};
&cpu0 {
--
2.34.1
Powered by blists - more mailing lists