lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221003070715.622701551@linuxfoundation.org> Date: Mon, 3 Oct 2022 09:12:10 +0200 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, Jaap Berkhout <j.j.berkhout@...alenberk.nl>, Niklas Cassel <niklas.cassel@....com>, Mario Limonciello <mario.limonciello@....com>, Damien Le Moal <damien.lemoal@...nsource.wdc.com> Subject: [PATCH 4.19 07/25] libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205 From: Niklas Cassel <niklas.cassel@....com> commit ea08aec7e77bfd6599489ec430f9f859ab84575a upstream. Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") added an explicit entry for AMD Green Sardine AHCI controller using the board_ahci_mobile configuration (this configuration has later been renamed to board_ahci_low_power). The board_ahci_low_power configuration enables support for low power modes. This explicit entry takes precedence over the generic AHCI controller entry, which does not enable support for low power modes. Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") was backported to stable kernels, it make some Pioneer optical drives, which was working perfectly fine before the commit was backported, stop working. The real problem is that the Pioneer optical drives do not handle low power modes correctly. If these optical drives would have been tested on another AHCI controller using the board_ahci_low_power configuration, this issue would have been detected earlier. Unfortunately, the board_ahci_low_power configuration is only used in less than 15% of the total AHCI controller entries, so many devices have never been tested with an AHCI controller with low power modes. Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") Cc: stable@...r.kernel.org Reported-by: Jaap Berkhout <j.j.berkhout@...alenberk.nl> Signed-off-by: Niklas Cassel <niklas.cassel@....com> Reviewed-by: Mario Limonciello <mario.limonciello@....com> Signed-off-by: Damien Le Moal <damien.lemoal@...nsource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> --- drivers/ata/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4560,6 +4560,10 @@ static const struct ata_blacklist_entry { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* These specific Pioneer models have LPM issues */ + { "PIONEER BD-RW BDR-207M", NULL, ATA_HORKAGE_NOLPM }, + { "PIONEER BD-RW BDR-205", NULL, ATA_HORKAGE_NOLPM }, + /* Crucial BX100 SSD 500GB has broken LPM support */ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },
Powered by blists - more mailing lists