| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221003092602.1323944-25-daniel.lezcano@linaro.org>
Date: Mon, 3 Oct 2022 11:25:57 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: daniel.lezcano@...aro.org, rafael@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
rui.zhang@...el.com, Raju Rangoju <rajur@...lsio.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Peter Kaestle <peter@...e.net>,
Hans de Goede <hdegoede@...hat.com>,
Mark Gross <markgross@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Amit Kucheria <amitk@...nel.org>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Broadcom Kernel Team <bcm-kernel-feedback-list@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Support Opensource <support.opensource@...semi.com>,
Lukasz Luba <lukasz.luba@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Thara Gopinath <thara.gopinath@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Niklas Söderlund <niklas.soderlund@...natech.se>,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Eduardo Valentin <edubezval@...il.com>,
Keerthy <j-keerthy@...com>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>,
Masami Hiramatsu <mhiramat@...nel.org>,
Antoine Tenart <atenart@...nel.org>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Dmitry Osipenko <digetx@...il.com>, netdev@...r.kernel.org,
platform-driver-x86@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-omap@...r.kernel.org,
Adam Ward <DLG-Adam.Ward.opensource@...renesas.com>
Subject: [PATCH v8 24/29] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@...renesas.com>
---
drivers/thermal/da9062-thermal.c | 52 +++++---------------------------
1 file changed, 8 insertions(+), 44 deletions(-)
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index 180edec34e07..1e163e90d6b6 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -120,44 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
- int trip,
- enum thermal_trip_type *type)
-{
- struct da9062_thermal *thermal = z->devdata;
-
- switch (trip) {
- case 0:
- *type = THERMAL_TRIP_HOT;
- break;
- default:
- dev_err(thermal->dev,
- "Driver does not support more than 1 trip-wire\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
- int trip,
- int *temp)
-{
- struct da9062_thermal *thermal = z->devdata;
-
- switch (trip) {
- case 0:
- *temp = DA9062_MILLI_CELSIUS(125);
- break;
- default:
- dev_err(thermal->dev,
- "Driver does not support more than 1 trip-wire\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
static int da9062_thermal_get_temp(struct thermal_zone_device *z,
int *temp)
{
@@ -172,8 +134,10 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,
static struct thermal_zone_device_ops da9062_thermal_ops = {
.get_temp = da9062_thermal_get_temp,
- .get_trip_type = da9062_thermal_get_trip_type,
- .get_trip_temp = da9062_thermal_get_trip_temp,
+};
+
+static struct thermal_trip trips[] = {
+ { .temperature = DA9062_MILLI_CELSIUS(125), .type = THERMAL_TRIP_HOT },
};
static const struct da9062_thermal_config da9062_config = {
@@ -228,10 +192,10 @@ static int da9062_thermal_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
mutex_init(&thermal->lock);
- thermal->zone = thermal_zone_device_register(thermal->config->name,
- 1, 0, thermal,
- &da9062_thermal_ops, NULL, pp_tmp,
- 0);
+ thermal->zone = thermal_zone_device_register_with_trips(thermal->config->name,
+ trips, ARRAY_SIZE(trips), 0, thermal,
+ &da9062_thermal_ops, NULL, pp_tmp,
+ 0);
if (IS_ERR(thermal->zone)) {
dev_err(&pdev->dev, "Cannot register thermal zone device\n");
ret = PTR_ERR(thermal->zone);
--
2.34.1
Powered by blists - more mailing lists