lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221003182637.v6.3.I50d04dcbe735dda69995cf1078824d671501869e@changeid> Date: Mon, 3 Oct 2022 18:27:36 +0800 From: Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com> To: LKML <linux-kernel@...r.kernel.org> Cc: dianders@...omium.org, Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>, Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org Subject: [PATCH v6 3/3] arm64: dts: qcom: Add touchscreen and touchpad support for evoker Change touchpad and touchscreen node for evoker Touchpad: SA461D-1011 Touchscreen: GT7986U Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com> --- Changes in v6: - add removed pinctrl and align touchscreen label with herobrine board Changes in v5: - Touchscreen / trackpad patch new for v5 .../boot/dts/qcom/sc7280-herobrine-evoker.dtsi | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi index e78072159d54b..d1723fbffae67 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi @@ -23,16 +23,15 @@ ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; pinctrl-names = "default"; pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - hid-descr-addr = <0x20>; vcc-supply = <&pp3300_z1>; wakeup-source; @@ -43,9 +42,9 @@ ts_i2c: &i2c13 { status = "okay"; clock-frequency = <400000>; - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; @@ -54,7 +53,7 @@ ap_ts: touchscreen@10 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - vcc33-supply = <&ts_avdd>; + vdd-supply = <&ts_avdd>; }; }; -- 2.34.1
Powered by blists - more mailing lists