linux-kernel - [PATCH v8 0/3] iio: adc: add max11410 adc driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221003105903.229-1-Ibrahim.Tilki@analog.com>
Date:   Mon, 3 Oct 2022 13:59:00 +0300
From:   Ibrahim Tilki <Ibrahim.Tilki@...log.com>
To:     <jic23@...nel.org>
CC:     Ibrahim Tilki <Ibrahim.Tilki@...log.com>,
        <linux-iio@...r.kernel.org>, <Nuno.Sa@...log.com>,
        <Nurettin.Bolucu@...log.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v8 0/3] iio: adc: add max11410 adc driver

Hi Krzysztof,

I had accidentally inclueded a different binding file in two previous patch, thus
irq flags slipped my eyes, sorry for that.

Best Regards,
Ibrahim

Note: No sign-off tag for David as he was unreachable when the initial patch was sent.

Changelog:
since v8:
  - dtbinding: remove quotes around adc.yaml
  - dtbinding: use defines for interrupt flags

since v7:
  - add asm-generic/unaligned.h header (reported by kernel test robot)
  - dtbinding: specify 2 items for interrupt-names
  - dtbinding: reorder required block

since v6:
  - don't require avdd supply if not needed

since v5:
  - allow user to specify both interrupt pins
  - keep irq info in max11410_state struct and use irq by name
  - get irqs by fwnode_get_irq_byname
  - don't allocate trigger when no irq supplied
  - fix deadlock condition in write_raw
  - minor style fixes
  - fix devicetree binding errors reported by dt_binding_check
  - convert module license to GPL as suggested by checkpatch

since v4:
  - add in_voltage_filter2_notch_{center,en} attrs for sinc4 filter
  - add ABI documentation for filter sysfs
  - check interrupt-names property for configuring gpio of max11410
  - remove hardwaregain property
  - add scale_available property for channes using PGA
  - separate vref regulator error -ENODEV from other errors
  - don't register trigger if no irq specified
  - style fixes

since v3:
  - prefix defines with MAX11410_
  - group vref regulators
  - use builtin iio_validate_scan_mask_onehot
  - validate iio trigger
  - move scan data into state struct
  - require vrefn regulator in DT if used by any channel
  - don't require irq for triggered buffer
  - remove filter sysfs attr and ABI documentation
  - add in_voltage_filter[0-1]_notch_{center,en} attrs

since v2:
  - remove bit position shifting, use field_prep instead
  - reduce the amount of reg writes in max11410_configure_channel
  - add error checking in max11410_parse_channels
  - remove some unneeded blank lines and minor style fixes
  - remove scan data assignment in max11410_trigger_handler



Ibrahim Tilki (3):
  iio: adc: add max11410 adc driver
  dt-bindings: iio: adc: add adi,max11410.yaml
  Documentation: ABI: testing: add max11410 doc

 .../ABI/testing/sysfs-bus-iio-adc-max11410    |   13 +
 .../bindings/iio/adc/adi,max11410.yaml        |  177 +++
 drivers/iio/adc/Kconfig                       |   13 +
 drivers/iio/adc/Makefile                      |    1 +
 drivers/iio/adc/max11410.c                    | 1050 +++++++++++++++++
 5 files changed, 1254 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-max11410
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
 create mode 100644 drivers/iio/adc/max11410.c

-- 
2.25.1