lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221003065202.3889095-8-o.rempel@pengutronix.de> Date: Mon, 3 Oct 2022 08:52:02 +0200 From: Oleksij Rempel <o.rempel@...gutronix.de> To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Russell King <linux@...linux.org.uk>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Jonathan Corbet <corbet@....net> Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de, linux-kernel@...r.kernel.org, netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-doc@...r.kernel.org, David Jander <david@...tonic.nl>, Luka Perkov <luka.perkov@...tura.hr>, Robert Marko <robert.marko@...tura.hr> Subject: [PATCH net-next v8 7/7] net: pse-pd: add regulator based PSE driver Add generic, regulator based PSE driver to support simple Power Sourcing Equipment without automatic classification support. This driver was tested on 10Bast-T1L switch with regulator based PoDL PSE. Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de> Reviewed-by: Andrew Lunn <andrew@...n.ch> --- changes v5: - use dev_err_probe on devm_regulator_get_exclusive() error - add __maybe_unused to the of_device_id changes v4: - rename to pse_regulator changes v2: - add regulator_enable test to the probe - migrate to the new PSE ethtool API --- drivers/net/pse-pd/Kconfig | 11 +++ drivers/net/pse-pd/Makefile | 2 + drivers/net/pse-pd/pse_regulator.c | 147 +++++++++++++++++++++++++++++ 3 files changed, 160 insertions(+) create mode 100644 drivers/net/pse-pd/pse_regulator.c diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig index 49c7f0bcff52..73d163704068 100644 --- a/drivers/net/pse-pd/Kconfig +++ b/drivers/net/pse-pd/Kconfig @@ -9,3 +9,14 @@ menuconfig PSE_CONTROLLER Generic Power Sourcing Equipment Controller support. If unsure, say no. + +if PSE_CONTROLLER + +config PSE_REGULATOR + tristate "Regulator based PSE controller" + help + This module provides support for simple regulator based Ethernet Power + Sourcing Equipment without automatic classification support. For + example for basic implementation of PoDL (802.3bu) specification. + +endif diff --git a/drivers/net/pse-pd/Makefile b/drivers/net/pse-pd/Makefile index cfa780c7801d..1b8aa4c70f0b 100644 --- a/drivers/net/pse-pd/Makefile +++ b/drivers/net/pse-pd/Makefile @@ -2,3 +2,5 @@ # Makefile for Linux PSE drivers obj-$(CONFIG_PSE_CONTROLLER) += pse_core.o + +obj-$(CONFIG_PSE_REGULATOR) += pse_regulator.o diff --git a/drivers/net/pse-pd/pse_regulator.c b/drivers/net/pse-pd/pse_regulator.c new file mode 100644 index 000000000000..e2bf8306ca90 --- /dev/null +++ b/drivers/net/pse-pd/pse_regulator.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Driver for the regulator based Ethernet Power Sourcing Equipment, without +// auto classification support. +// +// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@...gutronix.de> +// + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pse-pd/pse.h> +#include <linux/regulator/consumer.h> + +struct pse_reg_priv { + struct pse_controller_dev pcdev; + struct regulator *ps; /*power source */ + enum ethtool_podl_pse_admin_state admin_state; +}; + +static struct pse_reg_priv *to_pse_reg(struct pse_controller_dev *pcdev) +{ + return container_of(pcdev, struct pse_reg_priv, pcdev); +} + +static int +pse_reg_ethtool_set_config(struct pse_controller_dev *pcdev, unsigned long id, + struct netlink_ext_ack *extack, + const struct pse_control_config *config) +{ + struct pse_reg_priv *priv = to_pse_reg(pcdev); + int ret; + + if (priv->admin_state == config->admin_cotrol) + return 0; + + switch (config->admin_cotrol) { + case ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: + ret = regulator_enable(priv->ps); + break; + case ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: + ret = regulator_disable(priv->ps); + break; + default: + dev_err(pcdev->dev, "Unknown admin state %i\n", + config->admin_cotrol); + ret = -ENOTSUPP; + } + + if (ret) + return ret; + + priv->admin_state = config->admin_cotrol; + + return 0; +} + +static int +pse_reg_ethtool_get_status(struct pse_controller_dev *pcdev, unsigned long id, + struct netlink_ext_ack *extack, + struct pse_control_status *status) +{ + struct pse_reg_priv *priv = to_pse_reg(pcdev); + int ret; + + ret = regulator_is_enabled(priv->ps); + if (ret < 0) + return ret; + + if (!ret) + status->podl_pw_status = ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED; + else + status->podl_pw_status = + ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING; + + status->podl_admin_state = priv->admin_state; + + return 0; +} + +static const struct pse_controller_ops pse_reg_ops = { + .ethtool_get_status = pse_reg_ethtool_get_status, + .ethtool_set_config = pse_reg_ethtool_set_config, +}; + +static int +pse_reg_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pse_reg_priv *priv; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + if (!pdev->dev.of_node) + return -ENOENT; + + priv->ps = devm_regulator_get_exclusive(dev, "pse"); + if (IS_ERR(priv->ps)) + return dev_err_probe(dev, PTR_ERR(priv->ps), + "failed to get PSE regulator.\n"); + + platform_set_drvdata(pdev, priv); + + ret = regulator_is_enabled(priv->ps); + if (ret < 0) + return ret; + + if (ret) + priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED; + else + priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED; + + priv->pcdev.owner = THIS_MODULE; + priv->pcdev.ops = &pse_reg_ops; + priv->pcdev.dev = dev; + ret = devm_pse_controller_register(dev, &priv->pcdev); + if (ret) { + dev_err(dev, "failed to register PSE controller (%pe)\n", + ERR_PTR(ret)); + return ret; + } + + return 0; +} + +static const __maybe_unused struct of_device_id pse_reg_of_match[] = { + { .compatible = "podl-pse-regulator", }, + { }, +}; +MODULE_DEVICE_TABLE(of, pse_reg_of_match); + +static struct platform_driver pse_reg_driver = { + .probe = pse_reg_probe, + .driver = { + .name = "PSE regulator", + .of_match_table = of_match_ptr(pse_reg_of_match), + }, +}; +module_platform_driver(pse_reg_driver); + +MODULE_AUTHOR("Oleksij Rempel <kernel@...gutronix.de>"); +MODULE_DESCRIPTION("regulator based Ethernet Power Sourcing Equipment"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:pse-regulator"); -- 2.30.2
Powered by blists - more mailing lists