lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221003065202.3889095-6-o.rempel@pengutronix.de> Date: Mon, 3 Oct 2022 08:52:00 +0200 From: Oleksij Rempel <o.rempel@...gutronix.de> To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Russell King <linux@...linux.org.uk>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Jonathan Corbet <corbet@....net> Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel test robot <lkp@...el.com>, Bagas Sanjaya <bagasdotme@...il.com>, kernel@...gutronix.de, linux-kernel@...r.kernel.org, netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-doc@...r.kernel.org, David Jander <david@...tonic.nl>, Luka Perkov <luka.perkov@...tura.hr>, Robert Marko <robert.marko@...tura.hr> Subject: [PATCH net-next v8 5/7] ethtool: add interface to interact with Ethernet Power Equipment Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@...0: <BROADCAST,MULTICAST> .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot <lkp@...el.com> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@...il.com> Reviewed-by: Andrew Lunn <andrew@...n.ch> --- changes v8: - fix typo: pse_get_pse_attributs -> pse_get_pse_attributes changes v7: - change u8 comments to u32 - make IEEE 802.3-2018 keyword name as inline code block in the rst file. changes v6: - remove pointer checks in the pse_ethtool_*() functions - use EOPNOTSUPP instead of ENOTSUPP - remove ETHTOOL_MSG_PSE_NTF. It is currently not used - return ret on ethnl_ops_begin() error - use podl_admin_state > 0 instead of podl_admin_state >= 0 - add extack msg on !phydev and !phydev->psec for get and set functions. - avoid indenting the success path changes v5: - use u32 sized fields instead of u8 - document status field in the pse_ethtool_get_status function changes v3: - drop ethtool_set_ethtool_pse_ops() - remove todo artifact - remove ETHTOOL_PODL_PSE_*_COUNT, enums - fix kdoc warnings changes v2: - rework PSE ethtool API. Reduce it to get_status and set_config cbs - remove phydev locking. Use PSE own locking instead --- Documentation/networking/ethtool-netlink.rst | 59 ++++++ drivers/net/pse-pd/pse_core.c | 58 ++++++ include/linux/pse-pd/pse.h | 62 +++++++ include/uapi/linux/ethtool.h | 45 +++++ include/uapi/linux/ethtool_netlink.h | 16 ++ net/ethtool/Makefile | 3 +- net/ethtool/common.h | 1 + net/ethtool/netlink.c | 17 ++ net/ethtool/netlink.h | 4 + net/ethtool/pse-pd.c | 185 +++++++++++++++++++ 10 files changed, 449 insertions(+), 1 deletion(-) create mode 100644 net/ethtool/pse-pd.c diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 09fb1d5ba67f..d578b8bcd8a4 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -220,6 +220,8 @@ Userspace to kernel: ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters + ``ETHTOOL_MSG_PSE_SET`` set PSE parameters + ``ETHTOOL_MSG_PSE_GET`` get PSE parameters ===================================== ================================= Kernel to userspace: @@ -260,6 +262,7 @@ Kernel to userspace: ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters + ``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -1627,6 +1630,62 @@ For SFF-8636 modules, low power mode is forced by the host according to table For CMIS modules, low power mode is forced by the host according to table 6-12 in revision 5.0 of the specification. +PSE_GET +======= + +Gets PSE attributes. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PSE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested reply header + ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL + PSE functions + ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the + PoDL PSE. + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies +the operational state of the PoDL PSE functions. The operational state of the +PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` +action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2 +aPoDLPSEAdminState. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_podl_pse_admin_state + +When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies +the power detection status of the PoDL PSE. The status depend on internal PSE +state machine and automatic PD classification support. This option is +corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. +Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_podl_pse_pw_d_status + +PSE_SET +======= + +Sets PSE parameters. + +Request contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PSE_HEADER`` nested request header + ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used +to control PoDL PSE Admin functions. This option is implementing +``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See +``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values. + Request translation =================== diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c index f431159fcc0b..146b81f08a89 100644 --- a/drivers/net/pse-pd/pse_core.c +++ b/drivers/net/pse-pd/pse_core.c @@ -254,3 +254,61 @@ of_pse_control_get(struct device_node *node) return psec; } EXPORT_SYMBOL_GPL(of_pse_control_get); + +/** + * pse_ethtool_get_status - get status of PSE control + * @psec: PSE control pointer + * @extack: extack for reporting useful error messages + * @status: struct to store PSE status + */ +int pse_ethtool_get_status(struct pse_control *psec, + struct netlink_ext_ack *extack, + struct pse_control_status *status) +{ + const struct pse_controller_ops *ops; + int err; + + ops = psec->pcdev->ops; + + if (!ops->ethtool_get_status) { + NL_SET_ERR_MSG(extack, + "PSE driver does not support status report"); + return -EOPNOTSUPP; + } + + mutex_lock(&psec->pcdev->lock); + err = ops->ethtool_get_status(psec->pcdev, psec->id, extack, status); + mutex_unlock(&psec->pcdev->lock); + + return err; +} +EXPORT_SYMBOL_GPL(pse_ethtool_get_status); + +/** + * pse_ethtool_set_config - set PSE control configuration + * @psec: PSE control pointer + * @extack: extack for reporting useful error messages + * @config: Configuration of the test to run + */ +int pse_ethtool_set_config(struct pse_control *psec, + struct netlink_ext_ack *extack, + const struct pse_control_config *config) +{ + const struct pse_controller_ops *ops; + int err; + + ops = psec->pcdev->ops; + + if (!ops->ethtool_set_config) { + NL_SET_ERR_MSG(extack, + "PSE driver does not configuration"); + return -EOPNOTSUPP; + } + + mutex_lock(&psec->pcdev->lock); + err = ops->ethtool_set_config(psec->pcdev, psec->id, extack, config); + mutex_unlock(&psec->pcdev->lock); + + return err; +} +EXPORT_SYMBOL_GPL(pse_ethtool_set_config); diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h index 3ba787a48b15..fd1a916eeeba 100644 --- a/include/linux/pse-pd/pse.h +++ b/include/linux/pse-pd/pse.h @@ -9,6 +9,47 @@ #include <linux/list.h> #include <uapi/linux/ethtool.h> +struct phy_device; +struct pse_controller_dev; + +/** + * struct pse_control_config - PSE control/channel configuration. + * + * @admin_cotrol: set PoDL PSE admin control as described in + * IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl + */ +struct pse_control_config { + enum ethtool_podl_pse_admin_state admin_cotrol; +}; + +/** + * struct pse_control_status - PSE control/channel status. + * + * @podl_admin_state: operational state of the PoDL PSE + * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState + * @podl_pw_status: power detection status of the PoDL PSE. + * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: + */ +struct pse_control_status { + enum ethtool_podl_pse_admin_state podl_admin_state; + enum ethtool_podl_pse_pw_d_status podl_pw_status; +}; + +/** + * struct pse_controller_ops - PSE controller driver callbacks + * + * @ethtool_get_status: get PSE control status for ethtool interface + * @ethtool_set_config: set PSE control configuration over ethtool interface + */ +struct pse_controller_ops { + int (*ethtool_get_status)(struct pse_controller_dev *pcdev, + unsigned long id, struct netlink_ext_ack *extack, + struct pse_control_status *status); + int (*ethtool_set_config)(struct pse_controller_dev *pcdev, + unsigned long id, struct netlink_ext_ack *extack, + const struct pse_control_config *config); +}; + struct module; struct device_node; struct of_phandle_args; @@ -51,6 +92,13 @@ int devm_pse_controller_register(struct device *dev, struct pse_control *of_pse_control_get(struct device_node *node); void pse_control_put(struct pse_control *psec); +int pse_ethtool_get_status(struct pse_control *psec, + struct netlink_ext_ack *extack, + struct pse_control_status *status); +int pse_ethtool_set_config(struct pse_control *psec, + struct netlink_ext_ack *extack, + const struct pse_control_config *config); + #else static inline struct pse_control *of_pse_control_get(struct device_node *node) @@ -62,6 +110,20 @@ static inline void pse_control_put(struct pse_control *psec) { } +int pse_ethtool_get_status(struct pse_control *psec, + struct netlink_ext_ack *extack, + struct pse_control_status *status) +{ + return -ENOTSUPP; +} + +int pse_ethtool_set_config(struct pse_control *psec, + struct netlink_ext_ack *extack, + const struct pse_control_config *config) +{ + return -ENOTSUPP; +} + #endif #endif diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index fe9893d1485d..dc2aa3d75b39 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -736,6 +736,51 @@ enum ethtool_module_power_mode { ETHTOOL_MODULE_POWER_MODE_HIGH, }; +/** + * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState + * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are + * unknown + * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled + * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled + */ +enum ethtool_podl_pse_admin_state { + ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE. + * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is + * asserted true when the PoDL PSE state diagram variable mr_pse_enable is + * false" + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is + * asserted true when either of the PSE state diagram variables + * pi_detecting or pi_classifying is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower” + * is asserted true when the PoDL PSE state diagram variable pi_powered is + * true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted + * true when the PoDL PSE state diagram variable pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true + * when the logical combination of the PoDL PSE state diagram variables + * pi_prebiased*!pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted + * true when the PoDL PSE state diagram variable overload_held is true." + */ +enum ethtool_podl_pse_pw_d_status { + ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP, + ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE, + ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR, +}; + /** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 408a664fad59..bb57084ac524 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -49,6 +49,8 @@ enum { ETHTOOL_MSG_PHC_VCLOCKS_GET, ETHTOOL_MSG_MODULE_GET, ETHTOOL_MSG_MODULE_SET, + ETHTOOL_MSG_PSE_GET, + ETHTOOL_MSG_PSE_SET, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -94,6 +96,7 @@ enum { ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY, ETHTOOL_MSG_MODULE_GET_REPLY, ETHTOOL_MSG_MODULE_NTF, + ETHTOOL_MSG_PSE_GET_REPLY, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -863,6 +866,19 @@ enum { ETHTOOL_A_MODULE_MAX = (__ETHTOOL_A_MODULE_CNT - 1) }; +/* Power Sourcing Equipment */ +enum { + ETHTOOL_A_PSE_UNSPEC, + ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */ + ETHTOOL_A_PODL_PSE_ADMIN_CONTROL, /* u32 */ + ETHTOOL_A_PODL_PSE_PW_D_STATUS, /* u32 */ + + /* add new constants above here */ + __ETHTOOL_A_PSE_CNT, + ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1) +}; + /* generic netlink info */ #define ETHTOOL_GENL_NAME "ethtool" #define ETHTOOL_GENL_VERSION 1 diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile index b76432e70e6b..72ab0944262a 100644 --- a/net/ethtool/Makefile +++ b/net/ethtool/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_ETHTOOL_NETLINK) += ethtool_nl.o ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o \ linkstate.o debug.o wol.o features.o privflags.o rings.o \ channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \ - tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o + tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o \ + pse-pd.o diff --git a/net/ethtool/common.h b/net/ethtool/common.h index 2dc2b80aea5f..c1779657e074 100644 --- a/net/ethtool/common.h +++ b/net/ethtool/common.h @@ -46,6 +46,7 @@ int ethtool_get_max_rxfh_channel(struct net_device *dev, u32 *max); int __ethtool_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info); extern const struct ethtool_phy_ops *ethtool_phy_ops; +extern const struct ethtool_pse_ops *ethtool_pse_ops; int ethtool_get_module_info_call(struct net_device *dev, struct ethtool_modinfo *modinfo); diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c index f4e41a6e0163..1a4c11356c96 100644 --- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -286,6 +286,7 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = { [ETHTOOL_MSG_STATS_GET] = ðnl_stats_request_ops, [ETHTOOL_MSG_PHC_VCLOCKS_GET] = ðnl_phc_vclocks_request_ops, [ETHTOOL_MSG_MODULE_GET] = ðnl_module_request_ops, + [ETHTOOL_MSG_PSE_GET] = ðnl_pse_request_ops, }; static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb) @@ -1023,6 +1024,22 @@ static const struct genl_ops ethtool_genl_ops[] = { .policy = ethnl_module_set_policy, .maxattr = ARRAY_SIZE(ethnl_module_set_policy) - 1, }, + { + .cmd = ETHTOOL_MSG_PSE_GET, + .doit = ethnl_default_doit, + .start = ethnl_default_start, + .dumpit = ethnl_default_dumpit, + .done = ethnl_default_done, + .policy = ethnl_pse_get_policy, + .maxattr = ARRAY_SIZE(ethnl_pse_get_policy) - 1, + }, + { + .cmd = ETHTOOL_MSG_PSE_SET, + .flags = GENL_UNS_ADMIN_PERM, + .doit = ethnl_set_pse, + .policy = ethnl_pse_set_policy, + .maxattr = ARRAY_SIZE(ethnl_pse_set_policy) - 1, + }, }; static const struct genl_multicast_group ethtool_nl_mcgrps[] = { diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h index c0d587611854..1bfd374f9718 100644 --- a/net/ethtool/netlink.h +++ b/net/ethtool/netlink.h @@ -345,6 +345,7 @@ extern const struct ethnl_request_ops ethnl_module_eeprom_request_ops; extern const struct ethnl_request_ops ethnl_stats_request_ops; extern const struct ethnl_request_ops ethnl_phc_vclocks_request_ops; extern const struct ethnl_request_ops ethnl_module_request_ops; +extern const struct ethnl_request_ops ethnl_pse_request_ops; extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1]; extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1]; @@ -383,6 +384,8 @@ extern const struct nla_policy ethnl_stats_get_policy[ETHTOOL_A_STATS_GROUPS + 1 extern const struct nla_policy ethnl_phc_vclocks_get_policy[ETHTOOL_A_PHC_VCLOCKS_HEADER + 1]; extern const struct nla_policy ethnl_module_get_policy[ETHTOOL_A_MODULE_HEADER + 1]; extern const struct nla_policy ethnl_module_set_policy[ETHTOOL_A_MODULE_POWER_MODE_POLICY + 1]; +extern const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1]; +extern const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1]; int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info); int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info); @@ -402,6 +405,7 @@ int ethnl_tunnel_info_start(struct netlink_callback *cb); int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb); int ethnl_set_fec(struct sk_buff *skb, struct genl_info *info); int ethnl_set_module(struct sk_buff *skb, struct genl_info *info); +int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info); extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN]; extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN]; diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c new file mode 100644 index 000000000000..5a471e115b66 --- /dev/null +++ b/net/ethtool/pse-pd.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// ethtool interface for for Ethernet PSE (Power Sourcing Equipment) +// and PD (Powered Device) +// +// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@...gutronix.de> +// + +#include "common.h" +#include "linux/pse-pd/pse.h" +#include "netlink.h" +#include <linux/ethtool_netlink.h> +#include <linux/ethtool.h> +#include <linux/phy.h> + +struct pse_req_info { + struct ethnl_req_info base; +}; + +struct pse_reply_data { + struct ethnl_reply_data base; + struct pse_control_status status; +}; + +#define PSE_REPDATA(__reply_base) \ + container_of(__reply_base, struct pse_reply_data, base) + +/* PSE_GET */ + +const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = { + [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy), +}; + +static int pse_get_pse_attributes(struct net_device *dev, + struct netlink_ext_ack *extack, + struct pse_reply_data *data) +{ + struct phy_device *phydev = dev->phydev; + + if (!phydev) { + NL_SET_ERR_MSG(extack, "No PHY is attached"); + return -EOPNOTSUPP; + } + + if (!phydev->psec) { + NL_SET_ERR_MSG(extack, "No PSE is attached"); + return -EOPNOTSUPP; + } + + memset(&data->status, 0, sizeof(data->status)); + + return pse_ethtool_get_status(phydev->psec, extack, &data->status); +} + +static int pse_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + struct genl_info *info) +{ + struct pse_reply_data *data = PSE_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + int ret; + + ret = ethnl_ops_begin(dev); + if (ret < 0) + return ret; + + ret = pse_get_pse_attributes(dev, info->extack, data); + + ethnl_ops_complete(dev); + + return ret; +} + +static int pse_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct pse_reply_data *data = PSE_REPDATA(reply_base); + const struct pse_control_status *st = &data->status; + int len = 0; + + if (st->podl_admin_state > 0) + len += nla_total_size(sizeof(u32)); /* _PODL_PSE_ADMIN_STATE */ + if (st->podl_pw_status > 0) + len += nla_total_size(sizeof(u32)); /* _PODL_PSE_PW_D_STATUS */ + + return len; +} + +static int pse_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct pse_reply_data *data = PSE_REPDATA(reply_base); + const struct pse_control_status *st = &data->status; + + if (st->podl_admin_state > 0 && + nla_put_u32(skb, ETHTOOL_A_PODL_PSE_ADMIN_STATE, + st->podl_admin_state)) + return -EMSGSIZE; + + if (st->podl_pw_status > 0 && + nla_put_u32(skb, ETHTOOL_A_PODL_PSE_PW_D_STATUS, + st->podl_pw_status)) + return -EMSGSIZE; + + return 0; +} + +const struct ethnl_request_ops ethnl_pse_request_ops = { + .request_cmd = ETHTOOL_MSG_PSE_GET, + .reply_cmd = ETHTOOL_MSG_PSE_GET_REPLY, + .hdr_attr = ETHTOOL_A_PSE_HEADER, + .req_info_size = sizeof(struct pse_req_info), + .reply_data_size = sizeof(struct pse_reply_data), + + .prepare_data = pse_prepare_data, + .reply_size = pse_reply_size, + .fill_reply = pse_fill_reply, +}; + +/* PSE_SET */ + +const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = { + [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy), + [ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] = + NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED), +}; + +static int pse_set_pse_config(struct net_device *dev, + struct netlink_ext_ack *extack, + struct nlattr **tb) +{ + struct phy_device *phydev = dev->phydev; + struct pse_control_config config = {}; + + /* Optional attribute. Do not return error if not set. */ + if (!tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]) + return 0; + + /* this values are already validated by the ethnl_pse_set_policy */ + config.admin_cotrol = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]); + + if (!phydev) { + NL_SET_ERR_MSG(extack, "No PHY is attached"); + return -EOPNOTSUPP; + } + + if (!phydev->psec) { + NL_SET_ERR_MSG(extack, "No PSE is attached"); + return -EOPNOTSUPP; + } + + return pse_ethtool_set_config(phydev->psec, extack, &config); +} + +int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info) +{ + struct ethnl_req_info req_info = {}; + struct nlattr **tb = info->attrs; + struct net_device *dev; + int ret; + + ret = ethnl_parse_header_dev_get(&req_info, tb[ETHTOOL_A_PSE_HEADER], + genl_info_net(info), info->extack, + true); + if (ret < 0) + return ret; + + dev = req_info.dev; + + rtnl_lock(); + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out_rtnl; + + ret = pse_set_pse_config(dev, info->extack, tb); + ethnl_ops_complete(dev); +out_rtnl: + rtnl_unlock(); + + ethnl_parse_header_dev_put(&req_info); + + return ret; +} -- 2.30.2
Powered by blists - more mailing lists