| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 3 Oct 2022 11:46:24 -0500
From: Jerry Ray <jerry.ray@...rochip.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Rob Herring" <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
<UNGLinuxDriver@...rochip.com>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Jerry Ray <jerry.ray@...rochip.com>
Subject: [net-next][PATCH v4] dt-bindings: dsa: Add lan9303 yaml
Adding the dt binding yaml for the lan9303 3-port ethernet switch.
The microchip lan9354 3-port ethernet switch will also use the
same binding.
Signed-off-by: Jerry Ray <jerry.ray@...rochip.com>
---
v3->v4:
- Addressed v3 community feedback
v2->v3:
- removed cpu labels
- now patching against latest net-next
v1->v2:
- fixed dt_binding_check warning
- added max-speed setting on the switches 10/100 ports.
---
.../devicetree/bindings/net/dsa/lan9303.txt | 100 -------------
.../bindings/net/dsa/microchip,lan9303.yaml | 134 ++++++++++++++++++
MAINTAINERS | 8 ++
3 files changed, 142 insertions(+), 100 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/lan9303.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,lan9303.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
deleted file mode 100644
index 46a732087f5c..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-SMSC/MicroChip LAN9303 three port ethernet switch
--------------------------------------------------
-
-Required properties:
-
-- compatible: should be
- - "smsc,lan9303-i2c" for I2C managed mode
- or
- - "smsc,lan9303-mdio" for mdio managed mode
-
-Optional properties:
-
-- reset-gpios: GPIO to be used to reset the whole device
-- reset-duration: reset duration in milliseconds, defaults to 200 ms
-
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. The CPU port of this switch is always port 0.
-
-Note: always use 'reg = <0/1/2>;' for the three DSA ports, even if the device is
-configured to use 1/2/3 instead. This hardware configuration will be
-auto-detected and mapped accordingly.
-
-Example:
-
-I2C managed mode:
-
- master: masterdevice@X {
-
- fixed-link { /* RMII fixed link to LAN9303 */
- speed = <100>;
- full-duplex;
- };
- };
-
- switch: switch@a {
- compatible = "smsc,lan9303-i2c";
- reg = <0xa>;
- reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
- reset-duration = <200>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 { /* RMII fixed link to master */
- reg = <0>;
- ethernet = <&master>;
- };
-
- port@1 { /* external port 1 */
- reg = <1>;
- label = "lan1";
- };
-
- port@2 { /* external port 2 */
- reg = <2>;
- label = "lan2";
- };
- };
- };
-
-MDIO managed mode:
-
- master: masterdevice@X {
- phy-handle = <&switch>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch: switch-phy@0 {
- compatible = "smsc,lan9303-mdio";
- reg = <0>;
- reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
- reset-duration = <100>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- ethernet = <&master>;
- };
-
- port@1 { /* external port 1 */
- reg = <1>;
- label = "lan1";
- };
-
- port@2 { /* external port 2 */
- reg = <2>;
- label = "lan2";
- };
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan9303.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan9303.yaml
new file mode 100644
index 000000000000..ca6cbe83ba75
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan9303.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,lan9303.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LAN9303 Ethernet Switch Series
+
+allOf:
+ - $ref: dsa.yaml#
+
+maintainers:
+ - UNGLinuxDriver@...rochip.com
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - smsc,lan9303-mdio
+ - microchip,lan9354-mdio
+ - enum:
+ - smsc,lan9303-i2c
+ - microchip,lan9354-i2c
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description: Optional reset line
+ maxItems: 1
+
+ reset-duration:
+ description: Reset duration in milliseconds
+ default: 200
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ // Ethernet switch connected via mdio to the host
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&lan9303switch>;
+ phy-mode = "rmii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ lan9303switch: switch@0 {
+ compatible = "smsc,lan9303-mdio";
+ reg = <0>;
+ dsa,member = <0 0>;
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <ðernet>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ max-speed = <100>;
+ label = "lan1";
+ };
+ port@2 {
+ reg = <2>;
+ max-speed = <100>;
+ label = "lan2";
+ };
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ // Ethernet switch connected via i2c to the host
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-mode = "rmii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ lan9303: switch@1a {
+ compatible = "smsc,lan9303-i2c";
+ reg = <0x1a>;
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <ðernet>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ max-speed = <100>;
+ label = "lan1";
+ };
+ port@2 {
+ reg = <2>;
+ max-speed = <100>;
+ label = "lan2";
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5d58b55c5ae5..89055ff2838a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13386,6 +13386,14 @@ L: netdev@...r.kernel.org
S: Maintained
F: drivers/net/ethernet/microchip/lan743x_*
+MICROCHIP LAN9303/LAN9354 ETHERNET SWITCH DRIVER
+M: Jerry Ray <jerry.ray@...rochip.com>
+M: UNGLinuxDriver@...rochip.com
+L: netdev@...r.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/net/dsa/microchip,lan9303.yaml
+F: drivers/net/dsa/lan9303*
+
MICROCHIP LAN966X ETHERNET DRIVER
M: Horatiu Vultur <horatiu.vultur@...rochip.com>
M: UNGLinuxDriver@...rochip.com
--
2.25.1
Powered by blists - more mailing lists