linux-kernel - [PATCH 4/4] ARM: dts: motorola-mapphone: fix LCD reset line polarity

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221004213503.848262-4-dmitry.torokhov@gmail.com>
Date:   Tue,  4 Oct 2022 14:35:03 -0700
From:   Dmitry Torokhov <dmitry.torokhov@...il.com>
To:     Benoît Cousson <bcousson@...libre.com>,
        Tony Lindgren <tony@...mide.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     devicetree@...r.kernel.org, linux-omap@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 4/4] ARM: dts: motorola-mapphone: fix LCD reset line polarity

The LCD driver (panel-dsi-cm), when performing reset, starts with line
set high, then drives it low, holds it there for a moment, and releases
it back to high.  This means that the reset line should be described
as "active low" in DTS. This will be important when the driver is
converted to gpiod API which respects the polarity declared in DTS.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
 arch/arm/boot/dts/motorola-mapphone-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index c7a1f3ffc48c..beffa1cf08b2 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -212,7 +212,7 @@ lcd0: panel@0 {
 		reg = <0>;
 		label = "lcd0";
 		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* gpio101 */
 
 		backlight = <&backlight>;
 
-- 
2.38.0.rc1.362.ged0d419d3c-goog