linux-kernel - Re: [PATCH v3 1/2] arm64: dts: qcom: sagit: add initial device tree for sagit

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <6e2a25b1-3158-e3fc-8290-5064009972c7@linaro.org>
Date:   Tue, 4 Oct 2022 09:07:03 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Dzmitry Sankouski <dsankouski@...il.com>,
        linux-kernel@...r.kernel.org
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        "open list:ARM/QUALCOMM SUPPORT" <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>
Subject: Re: [PATCH v3 1/2] arm64: dts: qcom: sagit: add initial device tree
 for sagit

On 03/10/2022 20:54, Dzmitry Sankouski wrote:
> New device support - Xiaomi Mi6 phone
> 
> What works:
> - storage
> - usb
> - power regulators
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@...il.com>

Thank you for your patch. There is something to discuss/improve.

> +
> +&tlmm {
> +	gpio-reserved-ranges = <0 4>, <81 4>;
> +
> +	cci1_default_state: cci1-default-state {
> +		pins = "gpio19", "gpio20";
> +		function = "cci_i2c";
> +		bias-disable;
> +		drive-strength = <2>;
> +	};
> +
> +	cdc_reset_n: cdc-reset-n {

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> +		pins = "gpio64";
> +		function = "gpio";
> +		bias-pull-down;
> +		drive-strength = <16>;
> +		output-high;
> +	};
> +
> +	hall_sensor_default_state: hall-sensor-default-state {
> +		pins = "gpio124";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +		input-enable;
> +	};
> +
> +	mdss_dsi_active_state: mdss-dsi-active-state {
> +		pins = "gpio94";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-disable;
> +	};
> +
> +	mdss_dsi_suspend_state: mdss-dsi-suspend-state {
> +		pins = "gpio94";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
> +	mdss_te_active_state: mdss-te-active-state {
> +		pins = "gpio10";
> +		function = "mdp_vsync_a";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
> +	mdss_te_suspend_state: mdss-te-suspend-state {
> +		pins = "gpio10";
> +		function = "mdp_vsync_a";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
> +	msm_mclk0_active_state: msm-mclk0-active-state {
> +		pins = "gpio13";
> +		function = "cam_mclk";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	msm_mclk0_suspend_state: msm-mclk0-suspend-state {
> +		pins = "gpio13";
> +		function = "cam_mclk";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
> +	msm_mclk1_active_state: msm-mclk1-active-state {
> +		pins = "gpio14";
> +		function = "cam_mclk";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	msm_mclk1_suspend_state: msm-mclk1-suspend-state {
> +		pins = "gpio14";
> +		function = "cam_mclk";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
> +	nfc_int_active_state: nfc-int-active-state {
> +		pins = "gpio92";
> +		function = "gpio";
> +		drive-strength = <6>;
> +		bias-pull-up;
> +	};
> +
> +	nfc_int_suspend_state: nfc-int-suspend-state {
> +		pins = "gpio92";
> +		function = "gpio";
> +		drive-strength = <6>;
> +		bias-pull-up;
> +	};
> +
> +	nfc_enable_active_state: nfc-enable-active-state {
> +		pins = "gpio12", "gpio116";
> +		function = "gpio";
> +		drive-strength = <6>;
> +		bias-pull-up;
> +	};
> +
> +	nfc_enable_suspend_state: nfc-enable-suspend-state {
> +		pins = "gpio12", "gpio116";
> +		function = "gpio";
> +		drive-strength = <6>;
> +		bias-disable;
> +	};
> +
> +	ts_active_state: ts-active-state {
> +		pins = "gpio89", "gpio125";
> +		function = "gpio";
> +		drive-strength = <16>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +
> +	ts_int_suspend_state: ts-int-suspend-state {
> +		pins = "gpio125";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	ts_reset_suspend_state: ts-reset-suspend-state {
> +		pins = "gpio89";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	wcd_int_n: wcd-int-n {

You missed here state suffix

> +		pins = "gpio54";
> +		function = "gpio";
> +		bias-pull-down;
> +		drive-strength = <2>;
> +		input-enable;
> +	};
> +
> +	wsa_leftspk_pwr_n: wsa-leftspk-pwr-n {

Ditto

> +		pins = "gpio65";
> +		function = "gpio";
> +		bias-disable;
> +		drive-strength = <2>;
> +		output-low;
> +	};
> +> +	wsa_rightspk_pwr_n: wsa-rightspk-pwr-n {

Ditto

> +		pins = "gpio66";
> +		function = "gpio";
> +		bias-disable;
> +		drive-strength = <2>;
> +		output-low;
> +	};

Best regards,
Krzysztof