| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221004123956.188909-27-vkuznets@redhat.com>
Date: Tue, 4 Oct 2022 14:39:36 +0200
From: Vitaly Kuznetsov <vkuznets@...hat.com>
To: kvm@...r.kernel.org, Paolo Bonzini <pbonzini@...hat.com>,
Sean Christopherson <seanjc@...gle.com>
Cc: Wanpeng Li <wanpengli@...cent.com>,
Jim Mattson <jmattson@...gle.com>,
Michael Kelley <mikelley@...rosoft.com>,
Siddharth Chandrasekaran <sidcha@...zon.de>,
Yuan Yao <yuan.yao@...ux.intel.com>,
Maxim Levitsky <mlevitsk@...hat.com>,
linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v11 26/46] KVM: nVMX: hyper-v: Enable L2 TLB flush
Enable L2 TLB flush feature on nVMX when:
- Enlightened VMCS is in use.
- The feature flag is enabled in eVMCS.
- The feature flag is enabled in partition assist page.
Perform synthetic vmexit to L1 after processing TLB flush call upon
request (HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH).
Note: nested_evmcs_l2_tlb_flush_enabled() uses cached VP assist page copy
which gets updated from nested_vmx_handle_enlightened_vmptrld(). This is
also guaranteed to happen post migration with eVMCS backed L2 running.
Signed-off-by: Vitaly Kuznetsov <vkuznets@...hat.com>
---
arch/x86/include/asm/hyperv-tlfs.h | 9 +++++++++
arch/x86/kvm/vmx/hyperv.c | 17 +++++++++++++++++
arch/x86/kvm/vmx/hyperv.h | 1 +
arch/x86/kvm/vmx/nested.c | 20 ++++++++++++++++++++
4 files changed, 47 insertions(+)
diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index 6639979302ab..b25c6792d409 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -600,6 +600,15 @@ struct hv_enlightened_vmcs {
#define HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL 0xFFFF
+/*
+ * Note, Hyper-V isn't actually stealing bit 28 from Intel, just abusing it by
+ * pairing it with architecturally impossible exit reasons. Bit 28 is set only
+ * on SMI exits to a SMI transfer monitor (STM) and if and only if a MTF VM-Exit
+ * is pending. I.e. it will never be set by hardware for non-SMI exits (there
+ * are only three), nor will it ever be set unless the VMM is an STM.
+ */
+#define HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH 0x10000031
+
/*
* Hyper-V uses the software reserved 32 bytes in VMCB control area to expose
* SVM enlightenments to guests.
diff --git a/arch/x86/kvm/vmx/hyperv.c b/arch/x86/kvm/vmx/hyperv.c
index bceca1a99804..04a0bba58c7d 100644
--- a/arch/x86/kvm/vmx/hyperv.c
+++ b/arch/x86/kvm/vmx/hyperv.c
@@ -5,6 +5,7 @@
#include "../cpuid.h"
#include "hyperv.h"
+#include "nested.h"
#include "vmcs.h"
#include "vmx.h"
#include "trace.h"
@@ -500,6 +501,22 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
return 0;
}
+bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu)
+{
+ struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+ struct hv_enlightened_vmcs *evmcs = vmx->nested.hv_evmcs;
+
+ if (!hv_vcpu || !evmcs)
+ return false;
+
+ if (!evmcs->hv_enlightenments_control.nested_flush_hypercall)
+ return false;
+
+ return hv_vcpu->vp_assist_page.nested_control.features.directhypercall;
+}
+
void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu)
{
+ nested_vmx_vmexit(vcpu, HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH, 0, 0);
}
diff --git a/arch/x86/kvm/vmx/hyperv.h b/arch/x86/kvm/vmx/hyperv.h
index 8bf366730d33..571e7929d14e 100644
--- a/arch/x86/kvm/vmx/hyperv.h
+++ b/arch/x86/kvm/vmx/hyperv.h
@@ -243,6 +243,7 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
uint16_t *vmcs_version);
void nested_evmcs_filter_control_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
+bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu);
void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);
#endif /* __KVM_X86_VMX_HYPERV_H */
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index b7a1290b1ada..96da5931ac80 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -1131,6 +1131,15 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
+ /*
+ * KVM_REQ_HV_TLB_FLUSH flushes entries from either L1's VP_ID or
+ * L2's VP_ID upon request from the guest. Make sure we check for
+ * pending entries in the right FIFO upon L1/L2 transition as these
+ * requests are put by other vCPUs asynchronously.
+ */
+ if (to_hv_vcpu(vcpu) && enable_ept)
+ kvm_make_request(KVM_REQ_HV_TLB_FLUSH, vcpu);
+
/*
* If vmcs12 doesn't use VPID, L1 expects linear and combined mappings
* for *all* contexts to be flushed on VM-Enter/VM-Exit, i.e. it's a
@@ -3266,6 +3275,12 @@ static bool nested_get_vmcs12_pages(struct kvm_vcpu *vcpu)
static bool vmx_get_nested_state_pages(struct kvm_vcpu *vcpu)
{
+ /*
+ * Note: nested_get_evmcs_page() also updates 'vp_assist_page' copy
+ * in 'struct kvm_vcpu_hv' in case eVMCS is in use, this is mandatory
+ * to make nested_evmcs_l2_tlb_flush_enabled() work correctly post
+ * migration.
+ */
if (!nested_get_evmcs_page(vcpu)) {
pr_debug_ratelimited("%s: enlightened vmptrld failed\n",
__func__);
@@ -6142,6 +6157,11 @@ static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu,
* Handle L2's bus locks in L0 directly.
*/
return true;
+ case EXIT_REASON_VMCALL:
+ /* Hyper-V L2 TLB flush hypercall is handled by L0 */
+ return guest_hv_cpuid_has_l2_tlb_flush(vcpu) &&
+ nested_evmcs_l2_tlb_flush_enabled(vcpu) &&
+ kvm_hv_is_tlb_flush_hcall(vcpu);
default:
break;
}
--
2.37.3
Powered by blists - more mailing lists