linux-kernel - [PATCH v2 1/2] xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221006211529.1858-2-mario.limonciello@amd.com>
Date:   Thu, 6 Oct 2022 16:15:28 -0500
From:   Mario Limonciello <mario.limonciello@....com>
To:     Mathias Nyman <mathias.nyman@...el.com>,
        <mika.westerberg@...ux.intel.com>
CC:     Mehta Sanju <Sanju.Mehta@....com>,
        Mario Limonciello <mario.limonciello@....com>,
        Mathias Nyman <mathias.nyman@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 1/2] xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3.  Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.

As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.

In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers.

Suggested-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello <mario.limonciello@....com>
---
 drivers/usb/host/xhci-pci.c | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index dce6c0ec8d340..0d2d1cea94a4f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -69,14 +69,6 @@
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1		0x161a
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2		0x161b
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3		0x161d
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4		0x161e
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5		0x15d6
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6		0x15d7
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7		0x161c
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8		0x161f
 
 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
@@ -336,15 +328,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 		xhci->quirks |= XHCI_NO_SOFT_RETRY;
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
-	    (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
+	if (xhci->hci_version >= 0x102)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
-- 
2.34.1