lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 06 Oct 2022 09:58:00 +0000 From: Neil Armstrong <neil.armstrong@...aro.org> To: Konrad Dybcio <konrad.dybcio@...ainline.org>, Andy Gross <agross@...nel.org>, Lee Jones <lee@...nel.org>, Bjorn Andersson <andersson@...nel.org>, Linus Walleij <linus.walleij@...aro.org>, Mark Brown <broonie@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Rob Herring <robh+dt@...nel.org>, Liam Girdwood <lgirdwood@...il.com> Cc: linux-gpio@...r.kernel.org, Neil Armstrong <neil.armstrong@...aro.org>, linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org Subject: [PATCH 3/6] arm: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq node names and probe-reset property Fix the sx150xq node names to pinctrl and use the right probe-reset property. Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org> --- arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index 30a110984597..a8304769b509 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -116,7 +116,7 @@ i2c@4 { #size-cells = <0>; reg = <4>; - gpioext0: gpio@3e { + gpioext0: pinctrl@3e { /* GPIO Expander 0 Mapping : * - 0: ARDUINO_RESET_Level shift * - 1: BattChrgr_PG_N @@ -142,7 +142,7 @@ gpioext0: gpio@3e { interrupt-parent = <&gpioext1>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - probe-reset; + semtech,probe-reset; gpio-controller; interrupt-controller; @@ -154,7 +154,7 @@ i2c@5 { #size-cells = <0>; reg = <5>; - gpioext1: gpio@3f { + gpioext1: pinctrl@3f { /* GPIO Expander 1 Mapping : * - 0: GPIOEXP_INT1 * - 1: Battery detect @@ -183,7 +183,7 @@ gpioext1: gpio@3f { interrupt-parent = <&msmgpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - probe-reset; + semtech,probe-reset; gpio-controller; interrupt-controller; @@ -195,7 +195,7 @@ i2c@6 { #size-cells = <0>; reg = <6>; - gpioext2: gpio@70 { + gpioext2: pinctrl@70 { /* GPIO Expander 2 Mapping : * - 0: USB_HUB_INTn * - 1: HUB_CONNECT @@ -221,7 +221,7 @@ gpioext2: gpio@70 { interrupt-parent = <&gpioext1>; interrupts = <14 IRQ_TYPE_EDGE_FALLING>; - probe-reset; + semtech,probe-reset; gpio-controller; interrupt-controller; -- b4 0.10.1
Powered by blists - more mailing lists