[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221006124659.217540-29-krzysztof.kozlowski@linaro.org>
Date: Thu, 6 Oct 2022 14:46:53 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Stephan Gerhold <stephan@...hold.net>,
Shawn Guo <shawn.guo@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
krishna Lanka <quic_vamslank@...cinc.com>,
Sivaprakash Murugesan <sivaprak@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh@...nel.org>
Subject: [PATCH v4 28/34] dt-bindings: pinctrl: qcom,sdx55: fix matching pin config
The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'. Otherwise the subnodes
(level one and two) are not properly matched.
qcom-sdx55-telit-fn980-tlb.dtb: pinctrl@...0000: 'pcie_ep_clkreq_default', 'pcie_ep_perst_default', 'pcie_ep_wake_default' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
This method also unifies the bindings with other Qualcomm TLMM and LPASS
pinctrl bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Reviewed-by: Bjorn Andersson <andersson@...nel.org>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/pinctrl/qcom,sdx55-pinctrl.yaml | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a38090b14aab..fff57abf4fbc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -45,9 +45,17 @@ properties:
gpio-reserved-ranges:
maxItems: 1
-#PIN CONFIGURATION NODES
patternProperties:
- '-pins$':
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdx55-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdx55-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -146,7 +154,7 @@ examples:
#interrupt-cells = <2>;
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
- serial-pins {
+ serial-state {
pins = "gpio8", "gpio9";
function = "blsp_uart3";
drive-strength = <8>;
--
2.34.1
Powered by blists - more mailing lists