| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 6 Oct 2022 14:26:39 -0500
From: Rob Herring <robh@...nel.org>
To: Yassine Oudjana <yassine.oudjana@...il.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...nel.org>,
Andy Teng <andy.teng@...iatek.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Yassine Oudjana <y.oudjana@...tonmail.com>,
linux-mediatek@...ts.infradead.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 06/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl:
Add MT6795
On Wed, Oct 05, 2022 at 08:43:39PM +0300, Yassine Oudjana wrote:
> From: Yassine Oudjana <y.oudjana@...tonmail.com>
>
> Combine MT6795 pin controller document into MT6779 one. In the
> process, replace the current interrupts property description with
> the one from the MT6795 document since it makes more sense. Also
> amend property descriptions with more detailed information that
> was available in the MT6795 document, and replace the current
> pinmux node name patterns with ones from it since they are more
> common across mediatek pin controller bindings.
>
> Signed-off-by: Yassine Oudjana <y.oudjana@...tonmail.com>
> ---
> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 90 +++++--
> .../pinctrl/mediatek,pinctrl-mt6795.yaml | 225 ------------------
> 2 files changed, 73 insertions(+), 242 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> index a2141eb0854e..64d4b6a3b5bd 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> @@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
>
> maintainers:
> - Andy Teng <andy.teng@...iatek.com>
> + - AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> - Sean Wang <sean.wang@...nel.org>
>
> description:
> @@ -18,6 +19,7 @@ properties:
> compatible:
> enum:
> - mediatek,mt6779-pinctrl
> + - mediatek,mt6795-pinctrl
> - mediatek,mt6797-pinctrl
>
> reg:
> @@ -43,9 +45,8 @@ properties:
> interrupt-controller: true
>
> interrupts:
> - maxItems: 1
minItems: 1
maxItems: 2
> description: |
> - Specifies the summary IRQ.
> + The interrupt output to sysirq.
>
> "#interrupt-cells":
> const: 2
> @@ -81,6 +82,28 @@ allOf:
> - const: iocfg_lt
> - const: iocfg_tl
> - const: eint
> +
> + interrupts:
> + maxItems: 1
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt6795-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 2
> +
> + reg-names:
> + items:
> + - const: base
> + - const: eint
> +
> + interrupts:
> + minItems: 2
> + maxItems: 2
Just 'minItems: 2'
> - if:
> properties:
> compatible:
> @@ -111,32 +134,65 @@ allOf:
> - "#interrupt-cells"
>
> patternProperties:
> - '-[0-9]*$':
> + '-pins$':
> type: object
> additionalProperties: false
>
> patternProperties:
> - '-pins*$':
> + '^pins':
Seems like these 2 changes would break a bunch of cases.
> type: object
> description: |
> A pinctrl node should contain at least one subnodes representing the
> pinctrl groups available on the machine. Each subnode will list the
> pins it needs, and how they should be configured, with regard to muxer
> - configuration, pullups, drive strength, input enable/disable and input schmitt.
> - $ref: "/schemas/pinctrl/pincfg-node.yaml"
> + configuration, pullups, drive strength, input enable/disable and
> + input schmitt.
> + An example of using macro:
> + pincontroller {
> + /* GPIO0 set as multifunction GPIO0 */
> + gpio-pins {
> + pins {
> + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> + }
> + };
> + /* GPIO45 set as multifunction SDA0 */
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
> + }
> + };
> + };
Just put this in the actual example.
> + $ref: "pinmux-node.yaml"
>
> properties:
> pinmux:
> description:
> - integer array, represents gpio pin number and mux setting.
> - Supported pin number and mux varies for different SoCs, and are defined
> - as macros in boot/dts/<soc>-pinfunc.h directly.
> + Integer array, represents gpio pin number and mux setting.
> + Supported pin number and mux varies for different SoCs, and are
> + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
> + directly.
>
> bias-disable: true
>
> - bias-pull-up: true
> -
> - bias-pull-down: true
> + bias-pull-up:
> + oneOf:
> + - type: boolean
> + - enum: [100, 101, 102, 103]
> + description: Pull up PUPD/R0/R1 type define value.
> + description: |
> + For normal pull up type, it is not necessary to specify R1R0
> + values; When pull up type is PUPD/R0/R1, adding R1R0 defines
> + will set different resistance values.
> +
> + bias-pull-down:
> + oneOf:
> + - type: boolean
> + - enum: [100, 101, 102, 103]
> + description: Pull down PUPD/R0/R1 type define value.
> + description: |
> + For normal pull down type, it is not necessary to specify R1R0
> + values; When pull down type is PUPD/R0/R1, adding R1R0 defines
> + will set different resistance values.
>
> input-enable: true
>
> @@ -151,7 +207,7 @@ patternProperties:
> input-schmitt-disable: true
>
> drive-strength:
> - enum: [2, 4, 8, 12, 16]
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
>
> slew-rate:
> enum: [0, 1]
> @@ -218,8 +274,8 @@ examples:
> #interrupt-cells = <2>;
> interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
>
> - mmc0_pins_default: mmc0-0 {
> - cmd-dat-pins {
> + mmc0_pins_default: mmc0-pins {
> + pins-cmd-dat {
> pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
> <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
> <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
> @@ -232,11 +288,11 @@ examples:
> input-enable;
> mediatek,pull-up-adv = <1>;
> };
> - clk-pins {
> + pins-clk {
> pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
> mediatek,pull-down-adv = <2>;
> };
> - rst-pins {
> + pins-rst {
> pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
> mediatek,pull-up-adv = <0>;
> };
Powered by blists - more mailing lists