| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221009192405.97118-1-f.kardame@manjaro.org>
Date: Sun, 9 Oct 2022 22:24:05 +0300
From: Furkan Kardame <f.kardame@...jaro.org>
To: pgwipeout@...il.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Furkan Kardame <f.kardame@...jaro.org>
Subject: [PATCH] net: phy: add support for Motorcomm yt8531C phy
From: Peter Geis <pgwipeout@...il.com>
This patch adds support for Motorcomm YT8531C which is
used in OrangePi 3 LTS, OrangePi 4 LTS and OrangePi 800
Currently being used by Manjaro Arm kernel
Signed-off-by: Peter Geis <pgwipeout@...il.com>
Signed-off-by: Furkan Kardame <f.kardame@...jaro.org>
---
drivers/net/phy/motorcomm.c | 90 +++++++++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 7e6ac2c5e..cbc8ef15d 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -10,6 +10,7 @@
#include <linux/phy.h>
#define PHY_ID_YT8511 0x0000010a
+#define PHY_ID_YT8531 0x4f51e91b
#define YT8511_PAGE_SELECT 0x1e
#define YT8511_PAGE 0x1f
@@ -38,6 +39,38 @@
#define YT8511_DELAY_FE_TX_EN (0xf << 12)
#define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
+#define YT8531_RGMII_CONFIG1 0xa003
+
+/* TX Gig-E Delay is bits 3:0, default 0x1
+ * TX Fast-E Delay is bits 7:4, default 0xf
+ * RX Delay is bits 13:10, default 0x0
+ * Delay = 150ps * N
+ * On = 2000ps, off = 50ps
+ */
+#define YT8531_DELAY_GE_TX_EN (0xd << 0)
+#define YT8531_DELAY_GE_TX_DIS (0x0 << 0)
+#define YT8531_DELAY_FE_TX_EN (0xd << 4)
+#define YT8531_DELAY_FE_TX_DIS (0x0 << 4)
+#define YT8531_DELAY_RX_EN (0xd << 10)
+#define YT8531_DELAY_RX_DIS (0x0 << 10)
+#define YT8531_DELAY_MASK (GENMASK(13, 10) | GENMASK(7, 0))
+
+#define YT8531_SYNCE_CFG 0xa012
+
+/* Clk src config is bits 3:1
+ * 3b000 src from pll
+ * 3b001 src from rx_clk
+ * 3b010 src from serdes
+ * 3b011 src from ptp_in
+ * 3b100 src from 25mhz refclk *default*
+ * 3b101 src from 25mhz ssc
+ * Clk rate select is bit 4
+ * 1b0 25mhz clk output *default*
+ * 1b1 125mhz clk output
+ * Clkout enable is bit 6
+ */
+#define YT8531_CLKCFG_125M (BIT(6) | BIT(4) | (0x0 < 1))
+
static int yt8511_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, YT8511_PAGE_SELECT);
@@ -111,6 +145,51 @@ static int yt8511_config_init(struct phy_device *phydev)
return phy_restore_page(phydev, oldpage, ret);
}
+static int yt8531_config_init(struct phy_device *phydev)
+{
+ int oldpage, ret = 0;
+ unsigned int val;
+
+ oldpage = phy_select_page(phydev, YT8531_RGMII_CONFIG1);
+ if (oldpage < 0)
+ goto err_restore_page;
+
+ /* set rgmii delay mode */
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val = YT8531_DELAY_RX_DIS | YT8531_DELAY_GE_TX_DIS | YT8531_DELAY_FE_TX_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ val = YT8531_DELAY_RX_EN | YT8531_DELAY_GE_TX_DIS | YT8531_DELAY_FE_TX_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ val = YT8531_DELAY_RX_DIS | YT8531_DELAY_GE_TX_EN | YT8531_DELAY_FE_TX_EN;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ val = YT8531_DELAY_RX_EN | YT8531_DELAY_GE_TX_EN | YT8531_DELAY_FE_TX_EN;
+ break;
+ default: /* do not support other modes */
+ ret = -EOPNOTSUPP;
+ goto err_restore_page;
+ }
+
+ ret = __phy_modify(phydev, YT8511_PAGE, YT8531_DELAY_MASK, val);
+ if (ret < 0)
+ goto err_restore_page;
+
+ /* set clock mode to 125mhz */
+ ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8531_SYNCE_CFG);
+ if (ret < 0)
+ goto err_restore_page;
+
+ ret = __phy_write(phydev, YT8511_PAGE, YT8531_CLKCFG_125M);
+ if (ret < 0)
+ goto err_restore_page;
+
+err_restore_page:
+ return phy_restore_page(phydev, oldpage, ret);
+}
+
static struct phy_driver motorcomm_phy_drvs[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
@@ -120,7 +200,16 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.resume = genphy_resume,
.read_page = yt8511_read_page,
.write_page = yt8511_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
+ .name = "YT8531 Gigabit Ethernet",
+ .config_init = yt8531_config_init,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = yt8511_read_page,
+ .write_page = yt8511_write_page,
},
+
};
module_phy_driver(motorcomm_phy_drvs);
@@ -131,6 +220,7 @@ MODULE_LICENSE("GPL");
static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
+ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) },
{ /* sentinal */ }
};
--
2.37.3
Powered by blists - more mailing lists