| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 12 Oct 2022 01:01:13 +0200
From: Marcin Wojtas <mw@...ihalf.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Michał Grzelak <mig@...ihalf.com>,
devicetree@...r.kernel.org, linux@...linux.org.uk,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, upstream@...ihalf.com
Subject: Re: [PATCH v3 1/3] dt-bindings: net: marvell,pp2: convert to json-schema
wt., 11 paź 2022 o 22:34 Marcin Wojtas <mw@...ihalf.com> napisał(a):
>
> Hi Krzysztof,
>
> Let me chime in.
>
> wt., 11 paź 2022 o 21:50 Krzysztof Kozlowski
> <krzysztof.kozlowski@...aro.org> napisał(a):
> >
> > On 11/10/2022 15:06, Michał Grzelak wrote:
> > > Convert the marvell,pp2 bindings from text to proper schema.
> > >
> > > Move 'marvell,system-controller' and 'dma-coherent' properties from
> > > port up to the controller node, to match what is actually done in DT.
> >
> > You need to also mention other changes done during conversion -
> > requiring subnodes to be named "(ethernet-)?ports", deprecating port-id.
> >
> > >
> > > Signed-off-by: Michał Grzelak <mig@...ihalf.com>
> > > ---
> > > .../devicetree/bindings/net/marvell,pp2.yaml | 286 ++++++++++++++++++
> > > .../devicetree/bindings/net/marvell-pp2.txt | 141 ---------
> > > MAINTAINERS | 2 +-
> > > 3 files changed, 287 insertions(+), 142 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/net/marvell,pp2.yaml
> > > delete mode 100644 Documentation/devicetree/bindings/net/marvell-pp2.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
> > > new file mode 100644
> > > index 000000000000..24c6aeb46814
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
> > > @@ -0,0 +1,286 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
> > > +
> > > +maintainers:
> > > + - Marcin Wojtas <mw@...ihalf.com>
> > > + - Russell King <linux@...linux.org>
> > > +
> > > +description: |
> > > + Marvell Armada 375 Ethernet Controller (PPv2.1)
> > > + Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
> > > + Marvell CN913X Ethernet Controller (PPv2.3)
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - marvell,armada-375-pp2
> > > + - marvell,armada-7k-pp22
> > > +
> > > + reg:
> > > + minItems: 3
> > > + maxItems: 4
> > > +
> > > + "#address-cells":
> > > + const: 1
> > > +
> > > + "#size-cells":
> > > + const: 0
> > > +
> > > + clocks:
> > > + minItems: 2
> > > + items:
> > > + - description: main controller clock
> > > + - description: GOP clock
> > > + - description: MG clock
> > > + - description: MG Core clock
> > > + - description: AXI clock
> > > +
> > > + clock-names:
> > > + minItems: 2
> > > + items:
> > > + - const: pp_clk
> > > + - const: gop_clk
> > > + - const: mg_clk
> > > + - const: mg_core_clk
> > > + - const: axi_clk
> > > +
> > > + dma-coherent: true
> > > +
> > > + marvell,system-controller:
> > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > + description: a phandle to the system controller.
> > > +
> > > +patternProperties:
> > > + '^(ethernet-)?port@[0-9]+$':
> > > + type: object
> > > + description: subnode for each ethernet port.
> > > +
> > > + properties:
> > > + interrupts:
> > > + minItems: 1
> > > + maxItems: 10
> > > + description: interrupt(s) for the port
> > > +
> > > + interrupt-names:
> > > + minItems: 1
> > > + items:
> > > + - const: hif0
> > > + - const: hif1
> > > + - const: hif2
> > > + - const: hif3
> > > + - const: hif4
> > > + - const: hif5
> > > + - const: hif6
> > > + - const: hif7
> > > + - const: hif8
> > > + - const: link
> > > +
> > > + description: >
> > > + if more than a single interrupt for is given, must be the
> > > + name associated to the interrupts listed. Valid names are:
> > > + "hifX", with X in [0..8], and "link". The names "tx-cpu0",
> > > + "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
> > > + for backward compatibility but shouldn't be used for new
> > > + additions.
> > > +
> > > + reg:
> > > + description: ID of the port from the MAC point of view.
> > > +
> > > + port-id:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> >
> > deprecated: true
> >
> > > + description: >
> > > + ID of the port from the MAC point of view.
> > > + Legacy binding for backward compatibility.
> > > +
> > > + phy:
> > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > + description: >
> > > + a phandle to a phy node defining the PHY address
> > > + (as the reg property, a single integer).
> > > +
> > > + phy-mode:
> > > + $ref: ethernet-controller.yaml#/properties/phy-mode
> > > +
> > > + marvell,loopback:
> > > + $ref: /schemas/types.yaml#/definitions/flag
> > > + description: port is loopback mode.
> > > +
> > > + gop-port-id:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description: >
> > > + only for marvell,armada-7k-pp22, ID of the port from the
> > > + GOP (Group Of Ports) point of view. This ID is used to index the
> > > + per-port registers in the second register area.
> > > +
> > > + required:
> > > + - interrupts
> > > + - port-id
> > > + - phy-mode
> > > + - reg
> >
> > Keep the same order of items here as in list of properties
> >
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - clocks
> > > + - clock-names
> > > +
> > > +allOf:
> > > + - $ref: ethernet-controller.yaml#
> >
> > Hmm, are you sure this applies to top-level properties, not to
> > ethernet-port subnodes? Your ports have phy-mode and phy - just like
> > ethernet-controller. If I understand correctly, your Armada Ethernet
> > Controller actually consists of multiple ethernet controllers?
> >
>
> PP2 is a single controller with common HW blocks, such as queue/buffer
> management, parser/classifier, register space, and more. It controls
> up to 3 MAC's (ports) that can be connected to phys, sfp cages, etc.
> The latter cannot exist on their own and IMO the current hierarchy -
> the main controller with subnodes (ports) properly reflects the
> hardware.
>
> Anyway, the ethernet-controller.yaml properties fit to the subnodes.
> Apart from the name. The below is IMO a good description:.
>
> > If so, this should be moved to proper place inside patternProperties.
> > Maybe the subnodes should also be renamed from ports to just "ethernet"
> > (as ethernet-controller.yaml expects), but other schemas do not follow
> > this convention,
>
> ethernet@
> {
> ethernet-port@0
> {
> }
> ethernet-port@1
> {
> }
> }
>
> What do you recommend?
>
I moved the ethernet-controller.yaml reference to under the subnode
(this allowed me to remove phy and phy-mode description)) and it
doesn't complain about the node naming. Please let me know if below
would be acceptable.
--- a/Documentation/devicetree/bindings/net/marvell,pp2.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
@@ -61,7 +61,11 @@ patternProperties:
type: object
description: subnode for each ethernet port.
+ allOf:
+ - $ref: ethernet-controller.yaml#
+
properties:
interrupts:
minItems: 1
maxItems: 10
@@ -95,19 +99,11 @@ patternProperties:
port-id:
$ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
description: >
ID of the port from the MAC point of view.
Legacy binding for backward compatibility.
- phy:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: >
- a phandle to a phy node defining the PHY address
- (as the reg property, a single integer).
-
- phy-mode:
- $ref: ethernet-controller.yaml#/properties/phy-mode
-
marvell,loopback:
$ref: /schemas/types.yaml#/definitions/flag
description: port is loopback mode.
@@ -132,7 +128,6 @@ required:
- clock-names
allOf:
- - $ref: ethernet-controller.yaml#
- if:
Best regards,
Marcin
Powered by blists - more mailing lists