[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <81632b90-bc8a-7f3b-d2c9-153b4cea16ed@linaro.org>
Date: Thu, 13 Oct 2022 00:20:10 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Johan Hovold <johan+linaro@...nel.org>,
Vinod Koul <vkoul@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Kishon Vijay Abraham I <kishon@...com>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 16/20] phy: qcom-qmp-pcie: drop start-ctrl abstraction
On 12/10/2022 11:49, Johan Hovold wrote:
> All PCIe PHYs need to start and stop the SerDes and PCS so drop the
> start-ctrl abstraction which is no longer needed since the QMP driver
> split.
>
> Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 18 +++---------------
> 1 file changed, 3 insertions(+), 15 deletions(-)
I think it should be possible to also drop the pwrdn_ctrl by replacing
it with something like no_refclk_drv_dsbl. However I'd like to
understand why this is not required for SDX55. Is this the peculiarity
of that platform? Or is it a specifics of the EP mode?
Many, Vinod, do you know the answer by chance?
Nevertheless, for this patch:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index d3e7e673114f..5534a4ad0243 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -1355,7 +1355,6 @@ struct qmp_phy_cfg {
> /* array of registers with different offsets */
> const unsigned int *regs;
>
> - unsigned int start_ctrl;
> unsigned int pwrdn_ctrl;
> /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
> unsigned int phy_status;
> @@ -1491,7 +1490,6 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
> .num_vregs = 0,
> .regs = pciephy_regs_layout,
>
> - .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1517,7 +1515,6 @@ static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
> .num_vregs = 0,
> .regs = ipq_pciephy_gen3_regs_layout,
>
> - .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
>
> @@ -1547,7 +1544,6 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
> .num_vregs = 0,
> .regs = ipq_pciephy_gen3_regs_layout,
>
> - .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1575,7 +1571,6 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sdm845_qmp_pciephy_regs_layout,
>
> - .start_ctrl = PCS_START | SERDES_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1601,7 +1596,6 @@ static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sdm845_qhp_pciephy_regs_layout,
>
> - .start_ctrl = PCS_START | SERDES_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1639,7 +1633,6 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sm8250_pcie_regs_layout,
>
> - .start_ctrl = PCS_START | SERDES_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1677,7 +1670,6 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sm8250_pcie_regs_layout,
>
> - .start_ctrl = PCS_START | SERDES_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1703,7 +1695,6 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = pciephy_regs_layout,
>
> - .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
>
> @@ -1733,7 +1724,6 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sm8250_pcie_regs_layout,
>
> - .start_ctrl = PCS_START | SERDES_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1761,7 +1751,6 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sm8250_pcie_regs_layout,
>
> - .start_ctrl = PCS_START | SERDES_START,
> .pwrdn_ctrl = SW_PWRDN,
> .phy_status = PHYSTATUS_4_20,
> };
> @@ -1789,7 +1778,6 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sm8250_pcie_regs_layout,
>
> - .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS,
> };
> @@ -1832,7 +1820,6 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = sm8250_pcie_regs_layout,
>
> - .start_ctrl = SERDES_START | PCS_START,
> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
> .phy_status = PHYSTATUS_4_20,
> };
> @@ -1997,7 +1984,7 @@ static int qmp_pcie_power_on(struct phy *phy)
> qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> /* start SerDes and Phy-Coding-Sublayer */
> - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], SERDES_START | PCS_START);
>
> if (!cfg->skip_start_delay)
> usleep_range(1000, 1200);
> @@ -2030,7 +2017,8 @@ static int qmp_pcie_power_off(struct phy *phy)
> qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> /* stop SerDes and Phy-Coding-Sublayer */
> - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
> + SERDES_START | PCS_START);
>
> /* Put PHY into POWER DOWN state: active low */
> qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
--
With best wishes
Dmitry
Powered by blists - more mailing lists