[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221013183854.21087-1-vidyas@nvidia.com>
Date: Fri, 14 Oct 2022 00:08:33 +0530
From: Vidya Sagar <vidyas@...dia.com>
To: <lpieralisi@...nel.org>, <robh@...nel.org>, <kw@...ux.com>,
<bhelgaas@...gle.com>, <thierry.reding@...il.com>,
<jonathanh@...dia.com>, <kishon@...com>, <vkoul@...nel.org>,
<mani@...nel.org>, <Sergey.Semin@...kalelectronics.ru>,
<ffclaire1224@...il.com>
CC: <linux-pci@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<kthota@...dia.com>, <mmaddireddy@...dia.com>, <vidyas@...dia.com>,
<sagar.tv@...il.com>
Subject: [PATCH V3 00/21] Enhancements to pcie-tegra194 driver
This patch series contains enhancements to the pcie-tegra194.c driver
that works for both Tegra194 and Tegra234 SoCs and for both RootPort
and Endpoint modes.
This patch series depends on the following series in the same order
PCI: designware-ep: Fix DBI access before core init
https://patchwork.ozlabs.org/project/linux-pci/list/?series=322681
PCI: endpoint: Rework the EPC to EPF notification
https://patchwork.kernel.org/project/linux-pci/list/?series=683493
Add DeInit support in the PCIe Endpoint framework
https://patchwork.kernel.org/project/linux-pci/list/?series=685157
V3:
* Addressed review comments from Bjorn
* Added new patches to the series
V2:
* Addressed review comments from test bot and Vinod
Vidya Sagar (21):
PCI: tegra194: Use devm_gpiod_get_optional() to parse
"nvidia,refclk-select"
PCI: tegra194: Drive CLKREQ signal low explicitly
PCI: tegra194: Fix polling delay for L2 state
PCI: tegra194: Handle errors in BPMP response
PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
PCI: tegra194: Refactor LTSSM state polling on surprise down
PCI: tegra194: Disable direct speed change for EP
phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration
PCI: tegra194: Calibrate P2U for endpoint mode
PCI: tegra194: Free resources during controller deinitialization
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt
registration
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Enable hardware hot reset mode in Endpoint
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: tegra194: Set LTR message request before PCIe link up
PCI: tegra194: Reduce AXI slave timeout value
PCI: tegra194: Don't force the device into the D0 state before L2
PCI: tegra194: Free up EP resources during remove()
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Add core monitor clock support
.../bindings/pci/nvidia,tegra194-pcie-ep.yaml | 6 +-
.../bindings/pci/nvidia,tegra194-pcie.yaml | 6 +-
drivers/pci/controller/dwc/pcie-tegra194.c | 261 ++++++++++++------
drivers/phy/tegra/phy-tegra194-p2u.c | 14 +
4 files changed, 194 insertions(+), 93 deletions(-)
--
2.17.1
Powered by blists - more mailing lists