Date:   Thu, 13 Oct 2022 18:51:31 +0200
From:   Michał Grzelak <mig@...ihalf.com>
To:     devicetree@...r.kernel.org
Cc:     mw@...ihalf.com, linux@...linux.org.uk, davem@...emloft.net,
        edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        upstream@...ihalf.com,
        Michał Grzelak <mig@...ihalf.com>
Subject: [PATCH v4 0/3] marvell,pp2.yaml and .dtsi further improvements

Hi,

This patch series deprecates port-id in comparison to previous patches
and moves $ref:ethernet-controller.yaml to subnodes. Furthermore, it
adds phys: as an optional property of a subnode because of adding
unevaluatedProperties: false.

Best regards,
Michał

---
Changelog:
v3->v4
- change commit message of first patch
- move allOf:$ref to patternProperties:'^...':$ref
- deprecate port-id in favour of reg
- move reg to front of properties list in patternProperties
- reflect the order of properties in required list in
  patternProperties
- add unevaluatedProperties: false to patternProperties
- change unevaluated- to additionalProperties at top level
- add property phys: to ports subnode
- extend example binding with additional information about phys and sfp
- hook phys property to phy-consumer.yaml schema

v2->v3
- move 'reg:description' to 'allOf:if:then'
- change '#size-cells: true' and '#address-cells: true'
  to '#size-cells: const: 0' and '#address-cells: const: 1'
- replace all occurences of pattern "^eth\{hex_num}*"
  with "^(ethernet-)?port@[0-9]+$"
- add description in 'patternProperties:^...'
- add 'patternProperties:^...:interrupt-names:minItems: 1'
- add 'patternProperties:^...:reg:description'
- update 'patternProperties:^...:port-id:description'
- add 'patternProperties:^...:required: - reg'
- update '*:description:' to uppercase
- add 'allOf:then:required:marvell,system-controller'
- skip quotation marks from 'allOf:$ref'
- add 'else' schema to match 'allOf:if:then'
- restrict 'clocks' in 'allOf:if:then'
- restrict 'clock-names' in 'allOf:if:then'
- add #address-cells=<1>; #size-cells=<0>; in 'examples:'
- change every "ethX" to "ethernet-port@X" in 'examples:'
- add "reg" and comment in all ports in 'examples:'
- change /ethernet/eth0/phy-mode in examples://Armada-375
  to "rgmii-id"
- replace each cpm_ with cp0_ in 'examples:'
- replace each _syscon0 with _clk0 in 'examples:'
- remove each eth0X label in 'examples:'
- update armada-375.dtsi and armada-cp11x.dtsi to match
  marvell,pp2.yaml

v1->v2
- move 'properties' to the front of the file
- remove blank line after 'properties'
- move 'compatible' to the front of 'properties'
- move 'clocks', 'clock-names' and 'reg' definitions to 'properties' 
- substitute all occurences of 'marvell,armada-7k-pp2' with
  'marvell,armada-7k-pp22'
- add properties:#size-cells and properties:#address-cells 
- specify list in 'interrupt-names'
- remove blank lines after 'patternProperties'
- remove '^interrupt' and '^#.*-cells$' patterns
- remove blank line after 'allOf'
- remove first 'if-then-else' block from 'allOf'
- negate the condition in allOf:if schema
- delete 'interrupt-controller' from section 'examples'
- delete '#interrupt-cells' from section 'examples'

Marcin Wojtas (2):
  arm64: dts: marvell: Update network description to match schema
  ARM: dts: armada-375: Update network description to match schema

Michał Grzelak (1):
  dt-bindings: net: marvell,pp2: convert to json-schema

 .../devicetree/bindings/net/marvell,pp2.yaml  | 288 ++++++++++++++++++
 .../devicetree/bindings/net/marvell-pp2.txt   | 141 ---------
 MAINTAINERS                                   |   2 +-
 arch/arm/boot/dts/armada-375.dtsi             |  12 +-
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |  17 +-
 5 files changed, 308 insertions(+), 152 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/marvell,pp2.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/marvell-pp2.txt

-- 
2.37.3

Powered by blists - more mailing lists