lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221014221138.7552-3-quic_molvera@quicinc.com>
Date:   Fri, 14 Oct 2022 15:11:37 -0700
From:   Melody Olvera <quic_molvera@...cinc.com>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC:     <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Melody Olvera <quic_molvera@...cinc.com>
Subject: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.

Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
 2 files changed, 1673 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
new file mode 100644
index 000000000000..777734b30f56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -0,0 +1,1646 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,qdu1000.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen: chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domain-names = "psci";
+			power-domains = <&CPU_PD0>;
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		CPU_OFF: cpu-sleep-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "rail-pc";
+			entry-latency-us = <274>;
+			exit-latency-us = <480>;
+			min-residency-us = <3934>;
+			arm,psci-suspend-param = <0x40000004>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			idle-state-name = "cluster-l3-off";
+			entry-latency-us = <584>;
+			exit-latency-us = <2332>;
+			min-residency-us = <6118>;
+			arm,psci-suspend-param = <0x41000044>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			idle-state-name = "cluster-power-collapse";
+			entry-latency-us = <2893>;
+			exit-latency-us = <4023>;
+			min-residency-us = <9987>;
+			arm,psci-suspend-param = <0x41003344>;
+		};
+	};
+
+	firmware {
+		qcom_scm {
+			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@...00000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu-pd0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD1: cpu-pd1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD2: cpu-pd2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD3: cpu-pd3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CLUSTER_PD: cluster-pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x80000000 0x0 0x600000>;
+		};
+
+		xbl_dt_log_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x80600000 0x0 0x40000>;
+		};
+
+		xbl_ramdump_mem: memory@...40000 {
+			no-map;
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+		};
+
+		aop_image_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x80800000 0x0 0x60000>;
+		};
+
+		aop_cmd_db_mem: memory@...60000 {
+			compatible = "qcom,cmd-db";
+			no-map;
+			reg = <0x0 0x80860000 0x0 0x20000>;
+		};
+
+		aop_config_mem: memory@...80000 {
+			no-map;
+			reg = <0x0 0x80880000 0x0 0x20000>;
+		};
+
+		tme_crash_dump_mem: memory@...a0000 {
+			no-map;
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+		};
+
+		tme_log_mem: memory@...e0000 {
+			no-map;
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+		};
+
+		uefi_log_mem: memory@...e4000 {
+			no-map;
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+		};
+
+		/* secdata region can be reused by apps */
+
+		smem_mem: memory@...00000 {
+			compatible = "qcom,smem";
+			no-map;
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+		};
+
+		xbl_sc_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x80c00000 0x0 0x40000>;
+		};
+
+		/* uefi region can be reused by apps */
+
+		tz_stat_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x81d00000 0x0 0x100000>;
+		};
+
+		tags_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x81e00000 0x0 0x500000>;
+		};
+
+		qtee_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x82300000 0x0 0x500000>;
+		};
+
+		ta_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x82800000 0x0 0xa00000>;
+		};
+
+		fs1_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x83200000 0x0 0x400000>;
+		};
+
+		fs2_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x83600000 0x0 0x400000>;
+		};
+
+		fs3_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x83a00000 0x0 0x400000>;
+		};
+
+		/* Linux kernel image is loaded at 0x83e00000 */
+
+		ipa_fw_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x8be00000 0x0 0x10000>;
+		};
+
+		ipa_gsi_mem: memory@...10000 {
+			no-map;
+			reg = <0x0 0x8be10000 0x0 0x14000>;
+		};
+
+		mpss_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x8c000000 0x0 0x12c00000>;
+		};
+
+		q6_mpss_dtb_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x9ec00000 0x0 0x80000>;
+		};
+
+		tenx_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0xa0000000 0x0 0x19600000>;
+		};
+
+		oem_tenx_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0xb9600000 0x0 0x6a00000>;
+		};
+
+		tenx_q6_buffer_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0xc0000000 0x0 0x3200000>;
+		};
+
+		ipa_buffer_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0xc3200000 0x0 0x12c00000>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@...00 {
+			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
+			reg = <0x0 0x80000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+		};
+
+		gpi_dma0: dma-controller@...000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0x900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			status = "ok";
+		};
+
+		qupv3_id_0: geniqup@...000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
+					 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
+			qcom,iommu-geometry = <0x40000000 0x10000000>;
+			qcom,iommu-dma = "fastmap";
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart0: serial@...000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				dmas = <&gpi_dma0 0 1 3 64 0>,
+					<&gpi_dma0 1 1 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				dmas = <&gpi_dma0 0 1 1 64 0>,
+					<&gpi_dma0 1 1 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				dmas = <&gpi_dma0 0 2 3 64 0>,
+					<&gpi_dma0 1 2 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				dmas = <&gpi_dma0 0 2 1 64 0>,
+					<&gpi_dma0 1 2 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				dmas = <&gpi_dma0 0 3 3 64 0>,
+					<&gpi_dma0 1 3 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				dmas = <&gpi_dma0 0 3 1 64 0>,
+					<&gpi_dma0 1 3 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				dmas = <&gpi_dma0 0 4 3 64 0>,
+					<&gpi_dma0 1 4 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				dmas = <&gpi_dma0 0 4 1 64 0>,
+					<&gpi_dma0 1 4 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				dmas = <&gpi_dma0 0 5 3 64 0>,
+					<&gpi_dma0 1 5 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				dmas = <&gpi_dma0 0 5 1 64 0>,
+					<&gpi_dma0 1 5 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				dmas = <&gpi_dma0 0 6 3 64 0>,
+					<&gpi_dma0 1 6 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				dmas = <&gpi_dma0 0 6 1 64 0>,
+					<&gpi_dma0 1 6 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@...000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x99c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@...000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x116 0x0>;
+			status = "ok";
+		};
+
+		qupv3_id_1: geniqup@...000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x103 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-names = "m-ahb", "s-ahb";
+
+			ranges;
+			status = "disabled";
+
+			uart8: serial@...000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				dmas = <&gpi_dma1 0 1 3 64 0>,
+					<&gpi_dma1 1 1 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				dmas = <&gpi_dma1 0 1 1 64 0>,
+					<&gpi_dma1 1 1 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				dmas = <&gpi_dma1 0 2 3 64 0>,
+					<&gpi_dma1 1 2 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				dmas = <&gpi_dma1 0 2 1 64 0>,
+					<&gpi_dma1 1 2 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@...000 {
+				compatible = "qcom,i2c-geni";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				dmas = <&gpi_dma1 0 3 3 64 0>,
+					<&gpi_dma1 1 3 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				dmas = <&gpi_dma1 0 3 1 64 0>,
+					<&gpi_dma1 1 3 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				dmas = <&gpi_dma1 0 4 3 64 0>,
+					<&gpi_dma1 1 4 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				dmas = <&gpi_dma1 0 4 1 64 0>,
+					<&gpi_dma1 1 4 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				dmas = <&gpi_dma1 0 5 3 64 0>,
+					<&gpi_dma1 1 5 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@...000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				dmas = <&gpi_dma1 0 5 1 64 0>,
+					<&gpi_dma1 1 5 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				dmas = <&gpi_dma1 0 6 3 64 0>,
+					<&gpi_dma1 1 6 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				dmas = <&gpi_dma1 0 6 1 64 0>,
+					<&gpi_dma1 1 6 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@...000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				dmas = <&gpi_dma1 0 7 3 64 0>,
+					<&gpi_dma1 1 7 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@...000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				dmas = <&gpi_dma1 0 7 1 64 0>,
+					<&gpi_dma1 1 7 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		system_noc: interconnect@...0000 {
+			reg = <0x0 0x1640000 0x0 0x45080>;
+			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@...0000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x1f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@...0000 {
+			compatible = "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@...0000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0xc400000 0x0 0x3000>,
+			      <0x0 0xc500000 0x0 0x400000>,
+			      <0x0 0xc440000 0x0 0x80000>,
+			      <0x0 0xc4c0000 0x0 0x10000>,
+			      <0x0 0xc42d000 0x0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@...0000 {
+			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
+			reg = <0x0 0xf000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk {
+				pins = "gpio10", "gpio11";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup01";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs {
+				pins = "gpio13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk {
+				pins = "gpio12", "gpio13";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk {
+				pins = "gpio12", "gpio13", "gpio10";
+				function = "qup02";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs {
+				pins = "gpio11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk {
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup03";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs {
+				pins = "gpio17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk {
+				pins = "gpio16", "gpio17", "gpio14";
+				function = "qup04";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs {
+				pins = "gpio15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk {
+				pins = "gpio130", "gpio131";
+				function = "qup05";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk {
+				pins = "gpio130", "gpio131", "gpio132";
+				function = "qup05";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs {
+				pins = "gpio133";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk {
+				pins = "gpio132", "gpio133";
+				function = "qup06";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk {
+				pins = "gpio132", "gpio133", "gpio130";
+				function = "qup06";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs {
+				pins = "gpio131";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_rx: qup-uart7-rx {
+				pins = "gpio135";
+				function = "qup07";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx  {
+				pins = "gpio134";
+				function = "qup07";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart8_default: qup-uart8-default {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk {
+				pins = "gpio22", "gpio23";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk {
+				pins = "gpio22", "gpio23", "gpio24";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs {
+				pins = "gpio25";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk {
+				pins = "gpio24", "gpio25";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk {
+				pins = "gpio24", "gpio25", "gpio22";
+				function = "qup12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs {
+				pins = "gpio23";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk {
+				pins = "gpio26", "gpio27";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk {
+				pins = "gpio26", "gpio27", "gpio28";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs {
+				pins = "gpio29";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk {
+				pins = "gpio28", "gpio29";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk {
+				pins = "gpio28", "gpio29", "gpio26";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs {
+				pins = "gpio27";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk {
+				pins = "gpio30", "gpio31";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk {
+				pins = "gpio30", "gpio31", "gpio32";
+				function = "qup15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs {
+				pins = "gpio33";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart13_default: qup-uart13-default {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk {
+				pins = "gpio34", "gpio35";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup16";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs {
+				pins = "gpio37", "gpio38";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk {
+				pins = "gpio40", "gpio41";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk {
+				pins = "gpio40", "gpio41", "gpio30";
+				function = "qup17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs {
+				pins = "gpio31";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: apps-smmu@...00000 {
+			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
+				"arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@...00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		timer@...20000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@...21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17421000 0x0 0x1000>,
+				      <0x0 0x17422000 0x0 0x1000>;
+			};
+
+			frame@...23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17423000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@...25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17425000 0x0 0x1000>,
+				      <0x0 0x17426000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@...27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17427000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@...29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17429000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@...2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@...2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@...00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@...91000 {
+			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
+				"qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+		};
+
+		gem_noc: interconnect@...00000 {
+			reg = <0x0 0x19100000 0x0 0xB8080>;
+			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		arch_timer: timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			clock-frequency = <19200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
new file mode 100644
index 000000000000..074fe126e85e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+
+&reserved_memory {
+	/delete-node/ memory@...00000;
+	/delete-node/ memory@...00000;
+	/delete-node/ memory@...00000;
+
+	oem_tenx_mem: memory@...00000 {
+		no-map;
+		reg = <0x0 0xa0000000 0x0 0x6400000>;
+	};
+
+	mpss_diag_buffer_mem: memory@...00000 {
+		no-map;
+		reg = <0x0 0xaea00000 0x0 0x6400000>;
+	};
+
+	tenx_q6_buffer_mem: memory@...00000 {
+		no-map;
+		reg = <0x0 0xb4e00000 0x0 0x3200000>;
+	};
+};
-- 
2.38.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ