[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <24615c1e.123e96.183d5495a77.Coremail.duoming@zju.edu.cn>
Date: Fri, 14 Oct 2022 14:58:17 +0800 (GMT+08:00)
From: duoming@....edu.cn
To: "Leon Romanovsky" <leon@...nel.org>
Cc: "Greg KH" <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
isdn@...ux-pingi.de, kuba@...nel.org, andrii@...nel.org,
davem@...emloft.net, axboe@...nel.dk
Subject: Re: [PATCH] mISDN: hfcpci: Fix use-after-free bug in hfcpci_Timer
Hello,
On Fri, 14 Oct 2022 09:07:07 +0300 Leon Romanovsky wrote:
> On Thu, Oct 13, 2022 at 03:20:05PM +0200, Greg KH wrote:
> > On Thu, Oct 13, 2022 at 08:57:29PM +0800, Duoming Zhou wrote:
> > > If the timer handler hfcpci_Timer() is running, the
> > > del_timer(&hc->hw.timer) in release_io_hfcpci() could
> > > not stop it. As a result, the use-after-free bug will
> > > happen. The process is shown below:
> > >
> > > (cleanup routine) | (timer handler)
> > > release_card() | hfcpci_Timer()
> > > release_io_hfcpci |
> > > del_timer(&hc->hw.timer) |
> > > ... | ...
> > > kfree(hc) //[1]FREE |
> > > | hc->hw.timer.expires //[2]USE
> > >
> > > The hfc_pci is deallocated in position [1] and used in
> > > position [2].
> > >
> > > Fix by changing del_timer() in release_io_hfcpci() to
> > > del_timer_sync(), which makes sure the hfcpci_Timer()
> > > have finished before the hfc_pci is deallocated.
> > >
> > > Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver")
> > > Signed-off-by: Duoming Zhou <duoming@....edu.cn>
> > > ---
> > > drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
> > > index af17459c1a5..5cf37fe7de2 100644
> > > --- a/drivers/isdn/hardware/mISDN/hfcpci.c
> > > +++ b/drivers/isdn/hardware/mISDN/hfcpci.c
> > > @@ -157,7 +157,7 @@ release_io_hfcpci(struct hfc_pci *hc)
> > > {
> > > /* disable memory mapped ports + busmaster */
> > > pci_write_config_word(hc->pdev, PCI_COMMAND, 0);
> > > - del_timer(&hc->hw.timer);
> > > + del_timer_sync(&hc->hw.timer);
> >
> > Nice, how did you test that this will work properly? Do you have this
> > hardware for testing? How was this issue found and verified that this
> > is the correct resolution?
I am trying to simulate the hardware to verified that this is the correct
resolution. I will give feedback in a few weeks later.
> According to his previous response [1], the answer will be no. I'm not
> super-excited that this unmaintained and old driver chosen as playground
> for new tool.
>
> [1] https://lore.kernel.org/all/17ad6913.ff8e0.1838933840d.Coremail.duoming@zju.edu.cn/#t
Best regards,
Duoming Zhou
Powered by blists - more mailing lists