linux-kernel - Re: [PATCH 00/10] Add support for USB on STM32MP13

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <215c11d7-9bee-a97c-674c-06336f5c7dc9@foss.st.com>
Date:   Fri, 14 Oct 2022 16:01:15 +0200
From:   Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To:     <alexandre.torgue@...s.st.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>
CC:     <amelie.delaunay@...s.st.com>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH 00/10] Add support for USB on STM32MP13

On 10/14/22 11:26, Fabrice Gasnier wrote:
> Add support for USBPHYC, USB Host and USB OTG on STM32MP13.
> Enable all these interfaces on STM32MP135F-DK board.
> Enable the STM32G0 UCSI driver as module.
> Dependency on PWR and PMIC regulator is tempoarily managed by using
> fixed regulators (resp in the SoC dtsi and the board dts files).
> The USB support is functional when these regulators gets enabled at
> boot time before entering the kernel.

Hi,

Please discard this series. Generic node names recommendation has been
missed.
I'll send a V2.

Sorry for the noise.
Best Regards,
Fabrice

> 
> Amelie Delaunay (5):
>   ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
>   ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
>   ARM: dts: stm32: add USB OTG HS support on stm32mp131
>   ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
>   ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
> 
> Fabrice Gasnier (5):
>   ARM: dts: stm32: add PWR fixed regulators on stm32mp131
>   ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
>   ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
>   ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
>   ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules
> 
>  arch/arm/boot/dts/stm32mp13-pinctrl.dtsi |  7 ++
>  arch/arm/boot/dts/stm32mp131.dtsi        | 81 ++++++++++++++++++++
>  arch/arm/boot/dts/stm32mp135f-dk.dts     | 95 ++++++++++++++++++++++++
>  arch/arm/configs/multi_v7_defconfig      |  2 +
>  4 files changed, 185 insertions(+)
>