linux-kernel - [PATCH v2 00/10] Add support for USB on STM32MP13

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 14 Oct 2022 16:14:59 +0200
From:   Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To:     <alexandre.torgue@...s.st.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>
CC:     <amelie.delaunay@...s.st.com>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <fabrice.gasnier@...s.st.com>
Subject: [PATCH v2 00/10] Add support for USB on STM32MP13

Add support for USBPHYC, USB Host and USB OTG on STM32MP13.
Enable all these interfaces on STM32MP135F-DK board.
Enable the STM32G0 UCSI driver as module.
Dependency on PWR and PMIC regulator is tempoarily managed by using
fixed regulators (resp in the SoC dtsi and the board dts files).
The USB support is functional when these regulators gets enabled at
boot time before entering the kernel.

Changes in v2:
Adopt "usb" and "typec" generic node names

Amelie Delaunay (5):
  ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
  ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
  ARM: dts: stm32: add USB OTG HS support on stm32mp131
  ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
  ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk

Fabrice Gasnier (5):
  ARM: dts: stm32: add PWR fixed regulators on stm32mp131
  ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
  ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
  ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
  ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules

 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi |  7 ++
 arch/arm/boot/dts/stm32mp131.dtsi        | 81 ++++++++++++++++++++
 arch/arm/boot/dts/stm32mp135f-dk.dts     | 95 ++++++++++++++++++++++++
 arch/arm/configs/multi_v7_defconfig      |  2 +
 4 files changed, 185 insertions(+)

-- 
2.25.1