[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221014141509.211149-9-fabrice.gasnier@foss.st.com>
Date: Fri, 14 Oct 2022 16:15:07 +0200
From: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To: <alexandre.torgue@...s.st.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>
CC: <amelie.delaunay@...s.st.com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<fabrice.gasnier@...s.st.com>
Subject: [PATCH v2 08/10] ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
Add gpio pin configuration to be used with stm32g0 typec controller. Define
the PI2 to enable internal pull-up on stm32mp13, used as interrupt pin on
stm32mp135f-dk board.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
---
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index efdd163eba30..5c85c9fc583c 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -165,6 +165,13 @@ pins {
};
};
+ stm32g0_intn_pins_a: stm32g0-intn-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, GPIO)>;
+ bias-pull-up;
+ };
+ };
+
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
--
2.25.1
Powered by blists - more mailing lists